Removing the shelf in the refrigerator Atlant is a task that every owner faces sooner or later.hether you solved wash the internal surfaces, rearrange the shelves for convenience or replace a damaged part, the process requires accuracy and knowledge of the design features of the model. Unlike modern refrigerators with universal fastenings, the equipment of the Belarusian brand has its own nuances: from the type of plastic to the guide fixation system.
In this article we will look at all types of shelves refrigerators Atlant (glass, plastic, lattice), their fastenings and step-by-step dismantling instructions. We will pay special attention common errorsto those that lead to glass chips or plastic deformation. You will also find tips on reinstallation and a shelf compatibility table for different brand models.
Before you begin, make sure that the refrigerator is unplugged - this will eliminate the risk of electric shock electric shock due to accidental contact with internal elements. If you remove the shelf for defrosting, wait until the ice on the back wall melts a little: this will make it easier for the fasteners to come out of the grooves.
Types of shelves in Atlant refrigerators and their features
Refrigerators Atlant equipped with shelves of three main types, each of which has unique fastenings and materials:
- 🔹 Glass shelves - the most common option in the models Atlant XM and MHM. They can withstand weights of up to 25 kg, but require careful handling due to their fragility. They are mounted on plastic or metal guides with clamps.
- 🔹 Plastic solid shelves —found in budget series (for example, Atlant 130L). Lighter than glass, but can be deformed under the weight of jars or pans. They are fixed on latches or grooves.
- 🔹 Lattice shelves —used in freezers or older models. Made of metal or durable plastic, mounted on hooks or slides.
It is important to consider that in refrigerators with a system No Frost (for example, Atlant MY 2408-100), the shelves may have additional seals to prevent icing. They cannot be removed by force - first you need to release the latches on the sides.
Also pay attention to marking on the back of the shelf: some models Atlant have universal shelves suitable for several series, but with different spacing of fastenings. For example, a shelf from Atlant XM-4021 is not suitable for XM-4424 without adapters.
Preparation for removal: tools and safety measures
To dismantle the shelves in the refrigerator Atlant you will not need specialized tools, but some devices will simplify the process:
- 🔧 Plastic spatula or spatula —will help pry off the fasteners without damaging the plastic.
- 🧴 Silicone grease —if the guides are “stuck” from moisture (relevant for older models).
- 📏 Ruler or tape measure - for measuring the distance between the grooves when buying a new shelf.
- 🧤 Rubber gloves - will protect your hands from sharp edges of glass and cold.
Before starting work, complete the following steps:
- Unplug the refrigerator and wait until the interior warms up to room temperature (especially important for models with
No Frost). - Remove all products from the shelf and from adjacent departments - they may interfere with access to the fasteners.
- Place a towel under the refrigerator: when removing glass shelves, condensation may fall.
Empty the shelf of food
Disconnect the refrigerator from the mains
Wait 10-15 minutes for the chamber to warm up
Prepare tools and rags
Take a photo of the original position of the shelf (for reinstallation)-->
⚠️ Attention: If your refrigerator Atlant was manufactured before 2010, the shelf fastenings may be metal with rust. In this case, do not use force - treat the connections with WD-40 and wait 5-10. minutes.
Step-by-step instructions: how to remove a glass shelf
Glass shelves are the most common and at the same time the most fragile element. Their dismantling requires care, especially in models with spring clamps (For example, Atlant XM-6021). Follow the algorithm:
- Determine the type of fastening:
- If plastic “ears” are visible on the sides of the shelf - this is
latches(you need to press them at the same time). - If the shelf “sits” on a metal slide - this is
guides with grooves(the shelf needs to be moved forward and lift).
- If plastic “ears” are visible on the sides of the shelf - this is
- For latches: press both “ears” with your thumbs and pull the shelf towards you.
- For slides: carefully slide the shelf until it stops forward, then lift the rear edge 1-2 cm and pull it out.
- Remove the shelf: hold it strictly horizontally to avoid distortion and chipping. If the shelf is “jammed”, do not pull - check that all the latches are released.
- Raise the front edge of the shelf by 3-5 cm.
- Easily pull yourself until the rear fasteners come out of the grooves.
- If the shelf “doesn’t fit”, do not yank it - pry up the rear edge with a plastic spatula.
In models Atlant with a system Multi Air Flow (for example, MY 1605-100) glass shelves may have additional rear ones stops. They must first be bent with a flat screwdriver.
| Refrigerator model | Shelf mounting type | Dismantling features |
|---|---|---|
| Atlant XM-4021 | Plastic latches | You must press the latches simultaneously, otherwise the shelf will warp. |
| Atlant MHM-1708 | Metal slides | Before removing, move the shelf forward until it clicks. |
| Atlant MY 2408-100 | Rear stops + latches | First bend the stops with a screwdriver, then press the latches. |
| Atlant 130L (budget series) | Grooves without latches | The shelf is simply removed by moving it towards you. |
⚠️ Attention: If the glass shelf is cracked during dismantling, do not reuse it - even small cracks under load can lead to breakage and cuts.original spare parts for Atlant can be ordered according to the article number indicated on the page. sticker inside the refrigerator.
Dismantling plastic and lattice shelves
Plastic shelves in refrigerators Atlant are usually installed more easily than glass ones, but have their own nuances. For example, in models Atlant 130L and 160L shelves are fixed on flexible grooveswhich lose their elasticity over time. To remove such a shelf:
Lattice shelves (found in freezers or old refrigerators) are attached to metal hooks or slides. Dismantling algorithm:
- 🔸 If the shelf is on hooks: lift it all the way up, then slide it left/right (depending on the model) and remove.
- 🔸 If the shelf is on a slide: pull it towards you until it clicks, then lift the rear edge.
In freezers Atlant with the system Frost Free the grid shelves can be snow (covered with ice). Before removing, let the ice melt for 10–15 minutes or use a hair dryer at minimum power (keep at a distance of 30 cm!).
What to do if the plastic shelf is deformed?
If the shelf is bent under the weight, try to restore its shape:
1. Place the shelf in warm water (40–50°C) for 5–10 minutes.
2. Place on a flat surface and press down with a weight (for example, a book).
3. Let cool in this position for 1–2 hours.
If the deformation is critical, replace the shelf (the cost of the original part for Atlant is from 800 rubles).
Common mistakes and how to avoid them
Even with the apparent simplicity of the process, many refrigerator owners Atlant make mistakes that lead to breakdowns. Here are the most common of them:
- 🚫 Use of force —if the shelf cannot be removed, do not pull it with force. Most likely, you missed the latch or did not completely release the mount.
- 🚫 Ignoring the back stops - in models with
No Frostrear mounts are often hidden behind rubber gaskets. They need to be bent before removal. - 🚫 Improper extraction angle —glass shelves must be removed strictly horizontally, otherwise they may crack on the guides.
- 🚫 Use of metal tools —screwdrivers or knives scratch the plastic and may damage the door seals.
- Check the cleanliness of the grooves: even small particles of food or ice can interfere with proper fixation. Wipe the guides with a damp cloth and dry.
- Follow the sequence:
- For glass shelves: first insert the rear edge into the grooves, then lower the front edge until it clicks.
- For plastic shelves: insert the rear fasteners, then press on the front edge until they lock.
- Check the horizontal position: If the shelf is crooked, redistribute the products - over time this can lead to deformation.
- Remove the shelf completely.
- Move the guides to other grooves (usually the step is 2-3 cm).
- Install the shelf back, making sure that the fasteners are in the new holes.
Another typical problem is mixed up shelves when reinstalling. For example, in two-chamber refrigerators Atlant the shelves of the refrigerator and freezer compartments are similar in appearance, but have different mounting spacing. Always check the markings on the back!
If after removing the shelf you find that the guides are bent or broken, do not try to straighten them - this may break the seal of the chamber. Order new parts from an authorized dealer Atlant or at a service center.
How to install the shelf back: tips and tricks
Installing the shelf in place seems easier than dismantling it, but there are also nuances here. Follow these guidelines:
In refrigerators Atlant s adjustable shelves (for example, MY 1805-100) you can change the installation height. To do this:
If after installation the shelf wobbles or makes creaking noise, check:
- 🔹 The correct position of the fasteners (they should click).
- 🔹 There is no distortion (use a level or visually evaluate horizontal).
- 🔹 Integrity of the rubber seals on the guides (if worn, they need to be replaced).
Where to buy spare parts for the Atlant refrigerator
If the shelf is damaged during removal or you decide to update the internal equipment of the refrigerator, original spare parts can be purchased in several ways:
- 🛒 Official website Atlant —in the “Spare parts” section for the refrigerator model. Delivery takes 5–14 days.
- 🛒 Service centers —addresses can be found on the manufacturer’s website. Here you can also order the installation of a new shelf.
- 🛒 Marketplaces (Wildberries, Ozon, Yandex Market) - search by shelf article number (for example,
2408-100-0015for the model MY 2408-100). - 🛒 Home appliance stores - some offer universal ones shelves suitable for Atlant (check compatibility!).
The cost of original shelves for Atlant varies from 600 to 2,500 rubles depending on the model and material. data-i="255">Atlant
| Part name | Refrigerator model | Approximate price, ₽ |
|---|---|---|
| Glass shelf (top) | Atlant XM-6021 | 1 200–1 500 |
| Plastic shelf (bottom) | Atlant 160L | 600–800 |
| Grid shelf for freezer | Atlant MHM-1708 | 900–1 200 |
| Set of guides (2 pcs.) | Universal for the XM/MHM series | 400–600 |
⚠️ Attention: When purchasing spare parts on marketplaces, check the reviews - some sellers indicate incorrect part numbers. Original parts have a logo ATLANT and holographic. sticker.
FAQ: Answers to frequently asked questions
Can glass shelves be washed in a dishwasher?
No, this is not recommended. Sudden temperature changes and aggressive detergents can lead to this. microcracks that will eventually turn into chips. Wash the shelves manually with warm water and a mild detergent (for example, for children's dishes).
Why does the shelf in the Atlant refrigerator squeak when pulled out?
The creaking occurs due to:
- 🔹 Dirty guides —wipe them with a damp cloth and lubricate with silicone grease.
- 🔹 Wear of the plastic clamps —the guides need to be replaced.
- 🔹 Disk shelves —check the horizontal installation.
What to do if the shelf is jammed and cannot be removed?
Do not force it! First check:
- Have you released all the latches (sometimes the rear ones are hidden under the seal).
- Is there any ice on the guides? (in the freezer).
- Is the shelf itself deformed (try to gently rock it left and right).
If all else fails, contact the service center - independent attempts can aggravate the problem.
Is it possible to install shelves from others in the Atlant refrigerator brands?
Theoretically, yes, but only if they match:
- 🔹 Dimensions (length, width, thickness).
- 🔹 Type of fastening (step between guides).
- 🔹 Material (glass should be tempered, plastic - food grade).
It is better to use original spare parts or universal shelves with adjustable fasteners (for example, from Beko or Indesit).
How often do you need to remove shelves for washing?
Recommended frequency:
- 🔹 Refrigerator compartment — once every 1–2 months (or with visible contamination).
- 🔹 Freezer compartment — once every 3–4 months (combine with defrosting).
If foods with a strong smell (fish, spices) were stored in the refrigerator, wash the shelves immediately after emptying.