How to properly remove the Pozis refrigerator door: instructions with photos and nuances

Removing the refrigerator door Pozis is a task that sooner or later every owner of this equipment faces. The reasons can be different: from a banal rearrangement of furniture to the need hang the door to the other sideto repair hinges or replace the seal. Despite the apparent simplicity, the process requires care - errors during dismantling can lead to damage to the fasteners, warping of the door, or even breakdown of the opening mechanism.

In this article you will find step-by-step instructions with photosadapted to the model Pozis (including popular series RK-101, RK-140 i Pozis Frost Free). We'll look at what tools you'll need, how to avoid common mistakes, and what to do if the door doesn't fit back in after removal. And if your model has features, at the end of the article there is compatibility table taking into account the year of manufacture.

Before you begin, please note: the design of the hinges Pozis different from European or Korean refrigerators (for example, Samsung or LG). Here they are often used hidden fastenings under decorative plugs, and in models with the system No Frost additional fixation of the heating cable may be required. Don't miss these nuances!

Preparation: tools and safety measures

Before removing the refrigerator door Pozisprepare your work area and tools. You will need:

• ✅ Phillips screwdriver (PH2 size is the most popular for household appliances).
• ✅ 5 mm hexagon (for some models where the hinges are fixed with internal hexagon screws).
• ✅ Flat screwdriver or plastic pick (for removing decorative plugs).
• ✅ Wrench 10 mm (if the hinges are secured with nuts, as in old models Pozis RK-101).
• ✅ Making tape (to fix the door in the open position and avoid falling).
• ✅ Assistant (the refrigerator door weighs 10–15 kg - it is difficult to hold it with one hand when unscrewing the hinges).

Also prepare cardboard or soft fabricto put the door down after removal - this will protect it from scratches. If you plan hanging the door on the other sideimmediately prepare new holes for the hinges (a stencil is included with the refrigerator).

⚠️ Attention: If your refrigerator Pozis has a system No Frostbefore removing the door Be sure to unplug it. In some models, the door heating cable is connected to the electronic unit - sudden movement can damage the contacts.

Step 1: Removing decorative plugs from the hinges

The first stage is access to the hinge fastenings. In refrigerators Pozis they are usually hidden under plastic plugs, which can be removed in two ways:

1. For the top hinge: pry the plug flat. a screwdriver on the side (on the side opposite the door). It is attached to the latches and will be removed with a slight click.
2. For the lower hinge: pull the plug up - it is held on the grooves (for example, Pozis RK-140W) the bottom plug may be secured with a screw for a Phillips screwdriver.

Under the plugs you will see screws or nuts, fixing loops are often used in models before 2018, nuts for 10 mm, in newer ones - hex screws or a Phillips screwdriver. If the screws are stuck (important for refrigerators that have been sitting idle for 5+ years), spray them WD-40 and wait 10 minutes.

Important nuance: in two-chamber refrigerators Pozis (for example, RK-160) the upper hinge can be combined with the mount for freezer compartment. In this case, first remove the plug from the freezer door, and then from the main one.

Step 2: Unscrewing the top hinge

Start with the top hinge - this will simplify further dismantling. action:

1. Ask an assistant to hold the door so that it does not fall after unscrewing.
2. If the hinge is fixed with screwsunscrew them counterclockwise In models Pozis Frost Free there may be 3 screws: two on top and one on the side.
3. If the hinge is attached nut (relevant for older models), use a 10 mm wrench. The nut is usually located on the inside. body.
4. After unscrewing, carefully lift the door up - it should come out of the groove of the lower hinge.

In Pozis refrigerators with an electronic display (Premium series), the upper hinge can be connected to the power cable of the door module - do not pull the door by force - at first. disconnect the connector (it is usually located under the top panel).

⚠️ Attention: If, when unscrewing the top hinge, the door begins to “walk” or warp, stop working and check if there are any unscrewed screws left in the models. Pozis c double fixation (for example, RK-160) there may be a hidden screw under the rubber seal.

Step 3: Removing the lower hinge and completely dismantling the door

After the upper hinge is unscrewed, the refrigerator door Pozis will only be supported by the lower fastening. It is important to act carefully here:

1. Holding the door, tilt it towards you at an angle 30–45° this will release the lower groove.
2. If the lower hinge is fixed with screws, unscrew them (usually there are 2-3 of them). In models with automatic closing (for example Pozis Smart Close) there may be a spring mechanism - do not lose it when removing!
3. Carefully remove the door and place it on a previously prepared surface (cardboard, blanket).

In two-chamber refrigerators Pozis The freezer door is removed in the same way, but may be required preliminarily unscrewing the middle hinge (it connects both chambers). In this case, follow the principle: first the top, then the middle, then the bottom.

Typical mistakes and how to avoid them

Even with the apparent simplicity of the process, many refrigerator owners Pozis make mistakes, which then result in additional expenses for repairs. Here are the most common of them:

• ❌ Removing the door without an assistant. The door weighs 10–15 kg, and if you don’t hold it, it can fall and damage the hinges or seal. In the worst case, the glass will crack (important for models with glass shelves on the door).
• ❌ Ignoring the heating cable. In refrigerators with No Frost the cable is often attached to the door. If you do not disconnect it, you can break the contacts or damage the control unit.
• ❌ Loss of small parts. When removing the hinges, it is easy to lose washers, springs or rubber gaskets. Place all the parts in a separate box and photograph their location.
• ❌ Use of excessive force. If the screw does not come out, do not press the screwdriver with all your might - this can strip the thread. It is better to use WD-40 or heat the metal with a hair dryer.

Another common problem is distortion of the door after reinstallation. This happens if the hinges are twisted unevenly or the door is not fully seated in the grooves. To avoid this, follow the rule: fix the lower hinge first, then the upper one, and only then tighten the screws.

What to do if the door does not stand up after removal back?

If the door does not sit in place, check:

1. Are the hinges bent (relevant if the door has fallen).

2. Are there any foreign objects left in the grooves (for example, sealant or fastening washers).

3. Do the holes for the screws match? Sometimes, when rehanging on the other side, you need to drill new ones.

4. Is the heating cable connected correctly (for models with No Frost).

If the problem remains, the refrigerator body may be deformed - in this case, you will need to adjust the hinges using a level.

How to move the Pozis refrigerator door to the other side

If you remove the door in order to to move it to the other side (for example, when rearranging the kitchen), follow additional recommendations:

1. Remove all plugs from the opposite side of the refrigerator (there are already holes for the hinges, closed with plastic plugs).
2. Move mounts for the handle (if it is removable) or rearrange the handle itself.
3. In models with display (for example, Pozis Premium), you may need to relocate the power connector - it is usually located under the top panel.
4. When installing the door on a new side do not tighten the screws all the way right away. First, attach them, check whether the door hangs evenly, and only then fix it.

For models Pozis s automatic closing (series Smart Close) after reweighing may be required adjusting the spring mechanism. It is located in the lower hinge - tighten the adjustment screw (usually marked with an arrow) until the door begins to close smoothly.

What to do after removing the door: cleaning, repair, replacing the seal

When the door is removed, you have convenient access to those parts of the refrigerator that are usually hidden. Here's what you can do at this stage:

• 🧼 Clean the drainage hole. It is located at the bottom of the refrigerator compartment and is often clogged with crumbs and mold. Use a cotton swab or a special brush.
• 🔧 Check hinges for wear. If they squeak or play, lubricate them silicone grease (do not use WD-40 - it is aggressive for plastic!).
• 🚪 Replace the seal. If the rubber is torn or has lost elasticity, a new seal can be purchased according to the refrigerator model (the article number is usually indicated on the seal itself).
• ⚡ Check the heating cable. In models with No Frost it may fray or oxidize. If the insulation is damaged, it is better to replace the cable.

If you removed the door for hinge repair, pay attention to their condition:

- Backlash in the hinges can be eliminated by tightening the screws or replacing the bushings.

- Creak indicates a lack of lubrication or debris.

- Cracked hinge body is a reason for replacement (new hinges for Pozis cost from 500 to 1500 rubles depending on the model).

⚠️ Attention: If, after removing the door, you find that the refrigerator body is deformed (for example, a dent at the hinge attachment point), do not try to straighten it yourself. This may lead to seal failure. Contact the service center - they have special tools for straightening metal.

FAQ: Frequently asked questions about removing the door of a Pozis refrigerator

Is it possible to remove the door of a Pozis refrigerator alone, without an assistant?

Technically yes, but it’s risky. The door weighs 10–15 kg, and if it falls, the hinges or seal can be damaged. If you don't have an assistant, secure the door to the refrigerator body with masking tape and place a soft stand (such as a folded blanket) under it in case it falls. Unscrew the hinges gradually, holding the door with your hand.

What to do if, after removing the door, the Pozis refrigerator does not turn on?

Most likely, the problem is door heating cable (relevant for models with No Frost). Check:

1. Whether the cable connector was disconnected when removing the door.
2. Is there any visible damage on the wire (frayed, melted).
3. Did it not work thermal fuse (located next to the compressor).

If everything is in order, but the refrigerator does not work, there may be a failure in the control unit. Try unplugging it for 10 minutes, then plug it back in.

How to remove a door if the hinge screws are rusty?

Rusty screws are a common problem in refrigerators that are located in damp areas. To unscrew them:

1. Treat the screws WD-40 or acetic acid (apply for 10-15 minutes).
2. Use impact screwdriver or lightly tap it with a hammer to move the threads.
3. If the screw is broken, drill it with a drill (the drill should be thinner than the diameter of the screw).

After dismantling, replace the rusty screws with new ones (suitable size - M5 or M6).

Is it necessary to defrost the Pozis refrigerator before removing the door?

No, it is not necessary to defrost the refrigerator if you do not plan to keep the door removed for a long timeHowever:

• Unplug the refrigerator.
• If there is a lot of ice in the freezer, let it thaw for 1-2 hours - this will make the freezer door easier to remove.
• After installing the door back, wait until the refrigerator reaches temperature (usually 2-4 hours) before loading food.

Where can I buy new hinges for the Pozis refrigerator?

Spare parts for Pozis sold:

• B official service centers (there is a map of partners on the Pozis website).
• On marketplaces (Wildberries, Ozone, Yandex Market) - search by the exact model of the refrigerator.
• In shops of spare parts for household appliances (for example, "220 Volt", "Techport").

The average cost of hinges is from 500 to 1500 rubles. When purchasing, check whether the part is suitable for your model (the description should indicate which side - left or right).