How to properly remove the door from a Pozis refrigerator: instructions with photos and advice from experts

Removing the door from the refrigerator Pozis is a task that may be needed when moving, repairing or replacing seal. Many owners are afraid of damaging the mechanism or breaking the seal, but in fact the process is no more complicated than replacing a bicycle wheel. The main thing is to know the sequence of actions. In this article we will analyze step-by-step instructions taking into account the features of popular models attachment points and sequence of actions. In this article we will analyze step-by-step instructions, taking into account the features of popular models Pozis (for example, RD-109, RD-147 or RD-160), and also tell you how to avoid common mistakes.

Important: the design of doors on refrigerators Pozis is different from European brands (Samsung, LG). Here we use hidden hinges with bottom lockrather than classic hinges. This simplifies dismantling, but requires caution when working with plastic parts. If you have never done anything like this, don’t worry: with the right approach, the risk of damage is minimal.

Before starting work, make sure that the refrigerator is unplugged. This is not only a safety issue, but also protects the electronics from possible power surges when manipulating the case. Also prepare your work space: doors Pozis weigh from 8 to 15 kg (depending on the model), so it is better to remove them with two people or use a stand.

Preparation: tools and materials

To dismantle the door Pozis you don’t need a professional set - household tools are enough. Here's what you'll need:

• ✅ Phillips screwdriver (size PH2) - for most models Pozis Phillips screws are used.
• ✅ Hexagon 5 mm - in some modifications (for example, RD-147W) the hinges are fixed with hex bolts.
• ✅ Flat screwdriver or plastic pick — for carefully prying up decorative plugs.
• ✅ Making tape —to fix the door in the open position and avoid its spontaneous closing.
• ✅ A rag or towel —place under the door when removing it so as not to scratch the floor.

If you plan seal replacement or hinge repair, additionally prepare:

• ✅ New seal (select according to the refrigerator model - for Pozis Original PZ-801 or analogs are suitable RG-502).
• ✅ Silicone grease (for example, WD-40 Specialist) - for processing hinges after installation.
• ✅ Set of socket wrenches - if replacement of fasteners is required bolts.

Important! Before purchasing spare parts, check the serial number of the refrigerator (located on the sticker inside the chamber or on the back of the case). For models Pozis 2020–2023, the hinges may differ from earlier versions.

Step-by-step instructions: how to remove the door from a Pozis refrigerator

The dismantling process takes 10-20 minutes and consists of 5 key steps. Follow the instructions strictly in order to avoid distortions or damage to the hinges.

Step 1. Fixing the door in the open position

Open the refrigerator door 90 degrees and secure it with masking tape to the body. This will prevent spontaneous closing, which can lead to. pinched fingers or damage to the seal. In models with the function NoFrost (for example, RD-149NF) the door may be heavier due to additional thermal insulation - in this case it is better to work together.

Step 2. Removal decorative plugs

There are plastic plugs on the top and bottom hinges that hide the fastening bolts. Carefully pry them up with a flat screwdriver or a plastic pick. In models Pozis 2022–2026, the plugs may be on latches - pull them up, not to the side, so as not to break the fasteners.

Step 3. Unscrewing the hinges

Using a Phillips screwdriver or hexagon, unscrew the bolts securing the hinges. In Pozis refrigerators, the bottom hinge usually has an additional locking screw that keeps the door from sagging - you need to unscrew it first! The upper hinge is secured with 2-3 bolts, the lower - 3-4 (depending on model).

Step 4. Removing the door from the guides

After unscrewing the bolts, lift the door up 1-2 cm to remove it from grooves of the lower hinge. In models with two-chamber doors (for example, RD-109Kthe upper part is removed first, then the lower freezer compartment. If the door is "jammed", check whether there are any unscrewed bolts or fasteners.

Step 5. Laying the door on a flat surface

Put the door on a pre-prepared soft surface (towel, cardboard) with the inside side up. Avoid placing it on its edge - this may deform the seal or plastic panels.

Unplugged the refrigerator|

Secured the door with tape in the open position|

Removed the decorative plugs from the hinges|

Unscrewed the locking screw on the bottom hinge|

Prepared a place for door installation-->

Features for different Pozis models

Refrigerators Pozis are divided into several series, and the door removal process may differ slightly in the table below - key differences:

If your model is not listed in the table, pay attention to the hinge markings:

• 🔧 Hinges with plastic bushings (series RD-160) require care - with excessive force, the bushings may crack.
• 🔧 Hinges with metal hinges (series RD-149) are more durable, but the bolts often “stick” - use penetrating lubricant 10 minutes before unscrewing.
• 🔧 In models with water dispenser (for example, RD-185W) first the water supply hoses are disconnected (turn off the water and drain the remaining residue!).

What to do if the bolts are not unscrew?

If the bolts are “stuck” or rusty:

1. Apply penetrating lubricant (WD-40, Liqui Moly) and wait 10-15 minutes.

2. Use a socket wrench instead of a screwdriver - it gives more leverage.

3. If the bolt breaks, drill it with a drill 1-2 mm smaller than the thread diameter, then unscrew the remaining parts with pliers.

4. As a last resort, contact the service department - replacing a broken bolt yourself without experience can damage the threads in the body.

Typical mistakes and how to avoid them

Even with the apparent simplicity of the process, many make mistakes that lead to breakdowns. Here are the most common ones:

⚠️ Attention! Never try to remove the door without unscrewing the locking screw on the bottom hinge. This leads to deformation of the fasteners and disruption of the door geometry - it will no longer fit tightly after installation.

• ❌ Ignoring the locking screw — in 80% of cases this is the reason for the door to skew after reinstallation.
• ❌ Excessive force when lifting the door — can break the plastic guides in the hinges (relevant for models RD-109).
• ❌ Loss of decorative plugs - without them the hinges look unaesthetic, and in some models the plugs are secured by the anthers that protect the mechanism.
• ❌ Improper storage of the door - if you put it on the seal, it will become deformed. Always place the door inside up.

Another common problem — the bolts are mixed up during reassembly. In refrigerators Pozis the bolts of the upper and lower hinges may differ in length. For example, in the model RD-147:

• The upper bolts are 16 mm,
• The lower ones are 20 mm.

If they are mixed up, the door will sag or will not close tightly.

How to remove the freezer door (two-chamber models)

In refrigerators Pozis with two doors (for example, RD-109K or RD-160D) the freezer compartment is removed in the same way, but there are nuances:

1. First dismantled upper door (refrigerator compartment).
2. Then the hinges are unscrewed middle jumper (if there is one).
3. Only after this can you remove the freezer door.

In models with French door (for example, RD-185F) the process is more complicated:

• 🔧 First, both are removed upper doors (left and right).
• 🔧 Then the central rack is unscrewed.
• 🔧 Only after this can the lower freezer door be removed.

Important! In two-chamber refrigerators, the weight of the freezer door can reach 12–15 kg due to the thick layer of insulation. try to remove it alone - use help or a stand.

⚠️ Attention! In models with a system NoFrost (for example, RD-149NF) after removing the freezer door may fall out. guide for the ice makerFix it. tape so as not to lose it.

Reverse installation: how to avoid distortions

Install the door back more difficult than removing - accuracy is important here. Follow this algorithm:

1. Place the door on the bottom hingealigning the grooves.
2. Lift it all the way up to fix the bottom mechanism.
3. Secure the top hinge with bolts, but do not tighten them completely.
4. Check whether the door hangs evenly - the gaps around the perimeter should be the same (1-2 mm).
5. If there is a skew, loosen the bolts and adjust the position.
6. Tighten all bolts and install decorative plugs.

To check the tightness, use test with a sheet of paper:

1. Insert a sheet of paper between the seal and the body.
2. Close the door and try pull out the sheet.
3. If the sheet comes out easily, the seal does not fit tightly, adjustment of the hinges is required.

In models Pozis with electronic control (for example, RD-160E) after installing the door, you may need error reset. To do this:

1. Disconnect the refrigerator from the network for 1 minute.
2. Turn it back on and hold the button Super Cool 5 seconds.

When is it better to contact a specialist

Although door removal Pozis is within the capabilities of most users, in some cases it is better to trust a professional:

• 🔧 If the hinge bolts broken or torn thread - you will need a special tool to cut a new thread.
• 🔧 If the door deformed (for example, after a fall) - it can “lead”, and independent installation will only aggravate the problem.
• 🔧 In models with built-in display (for example, RD-185T) if dismantled carelessly, the control cable can be damaged.
• 🔧 If the refrigerator is on guarantees —self-repair can void it.

The cost of professional dismantling/installation of a door in service centers Pozis ranges from 1,200 to 2,500 rubles (for 2026). needed replacing the seal, craftsmen often offer a comprehensive service - dismantling, installing a new seal and adjusting the hinges - for 3,000–4,000 rubles.

⚠️ Attention! Prices and terms of warranty service may vary depending on the region and dealer. Please check. current information on the official website Pozis or from authorized partners.

FAQ: Frequently asked questions about removing Pozis doors

Is it possible to remove the Pozis refrigerator door without unscrewing the hinges completely?

No, in most models Pozis the door is fixed with at least 3-4 bolts on each hinge, and it cannot be removed without unscrewing them. The exception is some modern models (for example, RD-160 2026), where the upper hinge has a quick-release mechanism, but even in this case the lower hinge. you will have to unscrew.

What to do if after installation the door does not close tightly?

There may be several reasons:

1. Hinges are skewed - loosen the bolts and adjust the position of the door.
2. Deformation of the seal - try to restore its shape with a hairdryer (heat to 50–60°C and shape it with your hands).
3. If debris gets into the grooves - clean the guides with a dry cloth.
4. Wear of the hinges - in this case they need to be replaced (original hinges for Pozis have an article number PZ-301 for the top and PZ-302 for the bottom).

How often do you need to lubricate the hinges of the Pozis refrigerator?

Refrigerator hinges Pozis do not require regular lubrication, but if you notice a creaking or tight opening, use silicone grease (not oil!). 1-2 drops on the hinge every 2-3 years is enough. Avoid WD-40 - it corrodes plastic bushings.

You can Is it possible to change the Pozis refrigerator door to the other side?

Yes, most models Pozis support reversible fastening doors. To do this:

1. Remove the door according to the instructions. above.
2. Move the hinges to the opposite side (plugs for the holes are included in the kit).
3. Rearrange the handle (if it is removable) or turn it around.
4. Install the door back, paying attention to symmetry.

The exception is models with built-in dispenser (for example, RD-185W), where moving the door is technically impossible.

What what to do if the seal comes off when removing the door?

If the seal comes off the door, but is not torn, it can be glued back using special glue (for example, Moment Crystal or 3M Super Weatherstrip Adhesive). Procedure:

1. Clean the surface of the door and seal from grease and dust (use alcohol).
2. Apply a thin layer of glue to both parts being glued surface.
3. Press the seal tightly and secure it with masking tape for 24 hours.

If the seal is torn or out of shape, it will have to be replaced. Original seals for Pozis cost from 800 to 1,500 rubles (depending on the model).