Refrigerators Beko are deservedly popular due to their reliability and ergonomics, however, even the highest quality equipment requires periodic maintenance. Often, owners are faced with the need to remove internal elements for thorough washing, defrosting, or replacing a damaged part. Incorrect actions during dismantling can lead to breakage of plastic fasteners or broken glass, so it is important to know the exact sequence of actions.
The design of the refrigerator compartment Beko may differ depending on the model, but the general principle of removing removable elements remains similar for most series. The main attention should be paid to the type of fastening of the shelf, since it is this factor that determines whether force needs to be applied or whether it is enough to press the latch. Compliance with safety precautions When working with glass surfaces and plastic guides, it will avoid unnecessary costs for purchasing new components.
In this article we will look in detail at how to remove the tray in the Veko refrigerator, paying attention to the nuances of various models and typical mistakes that users make. You will learn how to handle the mechanisms Smart Fix, what to do if a shelf is stuck, and how to properly prepare the equipment for the procedure for removing elements.
Preparing the refrigerator for dismantling elements
Before you begin removing trays and shelves, you need to perform a number of preparatory steps that will ensure the safety of the process. First of all, experts advise emptying the shelf of products, since the weight of the contents can complicate the task and increase the risk of the glass surface falling. If there are heavy cans on the shelf, they should be moved to the lower level or temporarily put in a refrigerator bag.
This is an important step, especially if long-term washing or defrosting is planned. Although it is not always necessary to quickly remove a shelf, working with wet hands and an electrical appliance requires extra care. It is also worth preparing a soft towel or mat on the floor in front of the refrigerator, where you can temporarily put the removed elements. turning off the power supply, especially if long-term washing or defrosting is planned. Although it is not always necessary to quickly remove a shelf, working with wet hands and an electrical appliance requires extra care. It is also worth preparing a soft towel or mat on the floor in front of the refrigerator, where you can temporarily place the removed items.
Inspect the interior of the chamber to understand the type of fastening of the elements you have installed. In modern models Beko special guides are often used, which may have hidden latches. In some models of the NeoFrost series, glass guides can be integrated into the side walls and cannot be removed separately from the shelf itself.
⚠️ Attention: Never try to forcefully pull out the shelf if it is not lends itself. Plastic becomes brittle at low temperatures, and sudden movement can lead to a crack or breakage of the latch.
Removing glass shelves in the refrigerator compartment
Glass shelves in refrigerators Beko usually installed on plastic guides or special supports on the side walls. To remove such a shelf, you need to lift its front edge and pull it towards you. In most cases, the design allows you to remove glass without using tools, but it is important to maintain the angle of inclination.
If the shelf is equipped with a system Smart Fix or similar fastening mechanisms, the process may require pressing special levers. These clips are often located on the sides of the shelf frame or on the ends of the rails. A light press releases the latch, allowing the element to slide out without obstruction.
- 🧊 Make sure that the shelf is empty and there are no heavy objects on it that could displace the center of gravity.
- 👐 Grasp the shelf with both hands by the front edges, using suction cups or dry palms for a secure grip.
- 📏 Carefully lift the front part by 10-15 degrees and smoothly pull it towards you until it comes out of the grooves completely.
When installing the shelf back, make sure that it lies flat on all supports. Incorrect installation may result in misalignment and subsequent content fall. If you notice cracks in the glass, you should stop using such a shelf to avoid its complete destruction under the weight of the products.
Removing plastic trays and boxes
Plastic trays intended for storing vegetables, fruits or meat products are usually the easiest to remove. In refrigerators Beko they are often installed on telescopic guides or simply inserted into grooves. To remove it, just grab the handle or edge of the tray and pull it all the way, and then lift it slightly.
Particular attention should be paid to trays with a lid, which are often used for storing meat or fish. The lid may have special latches that must be unlocked before removing the container itself. In some models, the lid is removed separately from the base, which makes the washing process easier.
If the tray is equipped with wheels for sliding along the guides, check to see if they are stuck in the mechanism. Sometimes dirt or ice can block movement, in which case a slight rocking from side to side is required when pulling.
| Element type | Location | Attachment method | Tools |
|---|---|---|---|
| Glass shelf | Refrigerator compartment | Guides / Supports | Not required |
| Vegetable drawer | Bottom part | Grooves / Wheels | Not required |
| Meat tray | Middle/Lower tier | Guides | Not required |
| Shelf on the door | Inner door | Latches / Grooves | Screwdriver (rarely) |
Removing elements from the refrigerator door
Shelves on refrigerator door Beko are secured using plastic latches or installed in special profiles. To dismantle, you need to grab the shelf with both hands, lift it slightly and pull it up. If the shelf fits tightly, you can gently rock it from side to side to release the latches.
In some models, the upper shelves of the door may have additional fixation to prevent bottles from falling out. Such elements require more delicate handling. Press the side latches on both sides simultaneously to unlock the mechanism.
What to do if the latch on the door shelf breaks?
If the plastic latch breaks off, the shelf can be temporarily fixed using double-sided tape or special plastic holders sold in spare parts stores. However, for a long-lasting solution, it is better to order an original spare part for the refrigerator model.
After removing all the shelves, it is recommended to wash the profiles on the door, as dirt and food residues often accumulate there. Clean guides will ensure easy installation of the shelves back and prevent the appearance of an unpleasant odor.
Working with the No Frost system and freezer trays
In the freezer compartment of refrigerators Beko with the system No Frost trays and drawers are often installed on telescopic guides. The principle of their removal is similar to the refrigerator compartment: pull it out as far as it will go, lift it up and remove it. However, it is important here to be especially careful with plastic, which becomes more brittle in the cold.
If ice has formed in the freezer, do not try to force the box out. Wait until defrosted or carefully remove ice from around the guides. The use of sharp objects to chip ice is strictly prohibited, as this can damage the evaporator.
- ❄️ Allow the plastic to warm to room temperature before washing to avoid thermal shock.
- 🧼 Use mild detergents without abrasive particles to clean the drawers.
- 🔍 Check the integrity of the wheels and guides before installing the drawer back.
⚠️ Attention: The design of the guides in the freezer may vary depending on the year of manufacture of the model. If the standard method does not work, check the official instructions for your specific modification.
Typical errors and how to fix them
One of the most common mistakes is trying to remove a shelf without emptying it of its contents. The weight of the products puts additional stress on the fasteners, which can lead to their failure. Always remove cans and bags before dismantling.
Another mistake is ignoring the temperature regime. Plastic that has just been in the cold is very fragile. If you plan to wash the shelves, let them sit at room temperature for 10-15 minutes before starting active cleaning.
☑️ Checklist before removing the tray
If you do damage the fastening, do not despair. Many spare parts for refrigerators Beko are available for purchase separately. The main thing is not to use a damaged shelf, as it can collapse at any moment.
FAQ: Frequently asked questions
Can Beko glass shelves be washed in the dishwasher?
Most glass shelves Beko are made from tempered glass that can withstand high temperatures. However, plastic frames and mounts can become deformed when exposed to hot water and aggressive detergents. It is recommended to wash them by hand with warm water and a mild detergent.
What to do if the shelf cannot be removed and is stuck?
Do not use force. Check for food blocking the outlet or ice in the grooves. Try rocking the shelf slightly from side to side. If the problem cannot be solved, it may be necessary to disassemble the internal panels, which is best left to a specialist.
Where can I find the refrigerator model to order spare parts?
The model is indicated on the nameplate, which is usually located inside the refrigerator compartment on the left or right wall, or on the back wall of the case itself. The model code looks like a combination of letters and numbers, for example RDNK... or CNE....
How often should you remove and wash the trays?
To maintain hygiene and prevent odors, it is recommended to carry out a general cleaning of the internal elements of the refrigerator every 3-4 months. Regular cleaning of spilled liquids will also extend the life of plastic elements.