How to remove a shelf in a Pozis refrigerator: video, instructions and life hacks

Removing shelves in the refrigerator Pozis is a task that every owner faces sooner or later. The reasons may vary: deep cleaning, replacing a glass shelf after a crack, rearranging it to accommodate bulky products, or even repairing internal components. However, not everyone knows that improper dismantling can lead to damage to fasteningschips on the glass or even breakage of the guides. In this article we will figure out how to remove the shelf carefully, what tools you may need, and what to do if the structure is “jammed.” data-i="53">) have their own design features. For example, in some modifications the shelves are fixed not only with grooves, but also with special

Refrigerators Pozis (especially popular models of the series RK-101, RK-140 or Pozis RK-149W) have their own design features. For example, in some modifications the shelves are fixed not only with grooves, but also with special plastic latchess, which are easy to break with excessive force. In addition, glass shelves (even tempered ones) require special care - their weight and fragility often cause household injuries. To avoid mistakes, we have compiled step-by-step instructions taking into account different types of fastenings, and also added a video with visual examples.

If you have never disassembled a refrigerator before, don’t worry: the process is easier than it seems. The main thing is to understand fixation principle and take your time. And for those who prefer visual guidance, at the end of the article you will find a selection of video instructions from official service centers and experienced users.

Preparation for dismantling: what to do before removing the shelf

Before you begin removing the shelf, prepare your workspace and tools. This will help avoid scratches on the inner walls of the refrigerator, loss of small parts and other troubles.

First, unplug the refrigerator. Even if you plan to remove the shelf for just a few minutes, it is better to be safe: accidentally shorting or turning on the compressor during work can frighten or damage the equipment. If you store food in the freezer, transfer it to a cooler bag or wrap it in towels for insulation.

Next, clear the shelf of all food and accessories (containers, egg cups, etc.). Make sure there are no crumbs or liquids on the bottom of the refrigerator - they can get into the grooves of the fasteners and complicate the installation of the shelf back. For convenience, prepare:

• 🧴 Soft cloth or napkins —to wipe the shelf and inner walls.
• 📏 Plastic spatula or spatula —will help pry off the latches without damaging them.
• 🔧 A flat-tip screwdriver (if the shelf is secured with screws).
• 🧲 Magnet or adhesive tape - to temporarily secure the removed fasteners.

Pay attention to shelf type in your model Pozis:

• 🔹 Glass shelves —usually heavier and require support from below when removed.
• 🔹 Plastic shelves —lighter, but can be deformed during careless dismantling.
• 🔹 Shelves with a metal frame - often have additional fasteners.

Types of shelf fastenings in Pozis refrigerators

Design of shelf fastenings in refrigerators Pozis depends on the model and year of manufacture. For example, budget series (for example, Pozis RK-101) often use simple Grooved guides, while premium models (for example, Pozis ATLANT-M) may have combined systems with latches and screws. Let's consider the main options:

To determine the type of fastening in your model, inspect the side walls of the refrigerator at shelf level. If it is visible holes for screws, then you will need a screwdriver. If there are only grooves or small protrusions, the shelf is held on by latches or guides.

In Pozis models with the No Frost system (for example, Pozis RK-149W NF) shelves often have additional clamps to prevent displacement due to compressor vibration. They need to be pressed simultaneously from both sides!

Step-by-step instructions: how to remove a shelf with grooved guides

This is the most common type of fastening in refrigerators Pozis in the entry-level and mid-price segment. To remove such a shelf, follow the algorithm:

1. Lift the shelf up until it stops. Usually it rises 1–2 cm above the standard position.

2. Tilt the shelf towards you at an angle 30–45° and pull it forward. Do not use excessive force - if the shelf does not give way, check whether food or sealing rubber inserts are in the way.

3. If the shelf is “jammed”, inspect the grooves for accumulated ice or dirt. Wipe the guides with a dry cloth.

Installing the shelf back is even easier:

1. Insert the rear edge of the shelf into the grooves on the side walls.

2. Lower the front edge until it clicks (if there are latches) or simply lower the shelf to a horizontal position.

If the shelf wobbles or sags after installation, it means that it is not inserted completely. Repeat the process, paying attention to the symmetry of the fastening.

⚠️ Attention: In some Pozis models (for example, RK-140) groove guides have asymmetrical shape. If the shelf does not fit on one side, turn it over - you may be trying to insert it upside down.

How to remove a shelf with latches: a step-by-step guide

Shelves with latches are found in more modern models Poziswhere reliable fixation is important (for example, in refrigerators with a system No Frost). The main thing here is press both latches at the same time, otherwise you can break the plastic latches.

Here's how to do it correctly:

1. Find the latches - they are located on the front of the shelf, closer to the side walls of the refrigerator. Usually these are small plastic protrusions or buttons.

2. Pry up the latches on both sides with a plastic spatula or the blunt side of a knife. Do not use metal objects - they can scratch the coating!

3. Pull the shelf towards you, holding the latches in the depressed position. If the shelf does not budge, check if there are additional latches at the back.

In models Pozis ATLANT-M latches may be hidden under decorative overlays. To open them, carefully pry the cover on the side - under it you will find the locking levers.

Installing the shelf back:

1. Insert the shelf into the grooves on the side walls.

2. Press the front edge until there is a characteristic click (this means that the latches are in place).

3. Check the fixation by slightly pulling the shelf towards you - it should not move.

What to do if the latch is broken?

If the plastic latch is cracked, it can be temporarily replaced with a rubber seal or order a new one at the Pozis service center. Do not use superglue - it does not withstand low temperatures and can poison food.

Removing a shelf with screw fastenings: tools and nuances

Screw fastenings are less common, but they more reliably fix shelves in refrigerators with high vibration (for example, in models with powerful compressors). For dismantling you will need a Phillips or flathead screwdriver, depending on the type of screws.

Action algorithm:

1. Inspect the shelf for visible screws. They can be in the front (under the decorative plugs) or on the side.

2. Carefully unscrew the screws while holding the shelf with your other hand - it may drop sharply after loosening the fastening.

3. Remove the shelf by pulling it towards you. If it “fits” tightly, check for additional grooves or latches.

When installing back:

• 🔧 Tighten the screws evenlywithout overtightening - otherwise you can break the thread.
• 🔄 If the screws are rusty or tight, treat them WD-40 (after treatment, wipe dry!).

⚠️ Attention: In refrigerators Pozis s antibacterial coating (series BioFresh) screws can be made of stainless steel. To unscrew them, use a screwdriver with a magnetic tip so as not to drop the screw inside the refrigerator.

Video instructions: visual examples for different Pozis models

If the text instructions seem complicated, we recommend that you watch the videos from official service centers and experienced users. Below is a selection of proven videos with explanations:

• 📹 "How to remove a glass shelf in Pozis RK-140" - step-by-step video demonstrating groove fasteners. Watch on YouTube.
• 📹 "Dismantling a shelf with latches in Pozis No Frost" - shows how to simultaneously press the latches. Watch on YouTube.
• 📹 "Repairing shelf fastenings in Pozis ATLANT-M" - what to do if the latch is broken. Watch on YouTube.

Please note: some videos may demonstrate models from other brands (for example, Atlant or Samsung), but the principle of attaching shelves is often identical. The main thing is the match type of fixation (grooves, latches or screws).

If you haven’t found a video specifically for your model, look for videos using keywords:

• 🔍 «Pozis [your model] remove shelf";
• 🔍 «Pozis replacing a glass shelf";
• 🔍 "How to disassemble a refrigerator Pozis with your own hands."

Common mistakes and how to avoid them

Even with the apparent simplicity of the process, many users make mistakes that lead to breakdowns. Here are the most common of them and ways to prevent them:

Another typical problem is loss of small parts (screws, plugs, O-rings). To prevent this from happening, put all the removed elements in one container (for example, in a plastic container) and photograph the disassembly process.

⚠️ Attention: If, after installing the shelf back, the refrigerator begins to operate louder, check whether the shelf is touching No Frost system fan. This can lead to motor damage!

FAQ: answers to frequently asked questions

Is it possible to remove a shelf in a Pozis refrigerator without disconnecting it from networks?

Technically yes, but it’s not secure. Firstly, there is a risk of electric shock when coming into contact with metal parts. Secondly, the vibration of the compressor can move the shelf and damage the fasteners. It’s better to spend 2 minutes turning it off.

The shelf in Pozis RK-149W is not removable - what to do?

This model often uses combined fasteners (grooves + latches). Try:

1. Press the latches on the front with a plastic spatula.
2. Lift the shelf up 1-2 cm.
3. Tilt it towards you at an angle 45° and pull.

If not helps, check if there are hidden screws under the decorative overlays.

How to clean the grooves from grease and dirt before installing the shelf?

Use baking soda (1 tablespoon per glass of water) or vinegar solution (1:1 with water). Apply to fabric, rub into grooves, then dry. Do not use abrasives - they will damage the plastic!

Is it possible to replace a glass shelf with a plastic one in Pozis?

Theoretically yes, but you need to consider:

• 🔹 A plastic shelf may not withstand the weight of heavy products.
• 🔹 The dimensions and fastenings must match.
• 🔹 In models with No Frost plastic may be deformed due to temperature changes.

It is better to order an original glass shelf from the manufacturer.

Where to buy spare shelves for Pozis?

Official spare parts can be ordered:

• 🛒 On the website Pozis in the section “Spare parts.”
• 🛒 In service centers using a warranty card.
• 🛒 On marketplaces (for example, Wildberries, Ozon) - search by the exact name of the model.

The cost of a glass shelf for popular models is from 800 to 2500 rubles.