Owners of Pozis household appliances often encounter with the need to remove internal elements for thorough washing or replacement of damaged parts. Over time, glass shelves and grilles become covered with persistent stains that cannot be removed without complete dismantling. In refrigerators Position the design of the internal space is designed to ensure maximum ergonomics, however, the process of removing some elements requires knowledge of certain nuances.
Improper handling of the shelves can lead to damage to the glass or breakage of the plastic guides. Many users try to use force where a slight movement is enough, which causes expensive repairs. Following the correct sequence of actions will avoid injury and maintain the integrity of the interior of the refrigerator compartment.
In this article we will analyze in detail the algorithm of actions for various models of Pozis refrigerators. You will learn how to safely remove glass inserts, plastic grilles and balconies on the door. A key feature of many Pozis models is the shelf fixation system, which requires simultaneous pressure on the side stops. Only by understanding the principle of operation of the mechanism, you can quickly and efficiently carry out maintenance.
Preparing for dismantling the shelves
Before taking active steps, you must clear the work area. Remove all food, jars and containers that are on the shelf you plan to remove, as well as on adjacent levels. This will provide free access to the guides and prevent products from falling if the structure is accidentally skewed.
Be sure to disconnect the refrigerator from the power supply if you plan to carry out deep cleaning using water. Although it is not always necessary to remove a shelf, safety should be a priority when working with electrical appliances. Allow the chamber to warm up a little if ice has formed in it, as ice can block the movement of the runners.
Prepare a soft towel or rug that can be laid on the floor. Glass shelves have significant weight and if they fall, they can break, damaging the floor covering or the master’s feet. You may also need warm water and detergent to immediately clean the removed element.
⚠️ Attention: Never try to remove the shelf if the refrigerator compartment is still running on intense cooling and condensation or ice has formed on the glass. This increases the risk of slipping and injury.
Make sure there are no sharp objects in the immediate area that could cause you to cut yourself. Wear stable shoes to avoid falling on a slippery floor if water suddenly spills. Careful preparation is the key to successfully completing the operation without unnecessary nerves and damage.
Removing glass shelves in the main chamber
The process of removing a glass shelf depends on the type of its fastening. Most models Pozis use either side guides or stops on the back wall. To begin, gently pull the shelf towards you. If it does not move, do not use force, but carefully inspect the mounting points.
If the shelf is supported on side plastic slides, it is necessary to lift the front part of the glass a few millimeters. Then, holding the glass up, gently pull it towards you. It is often necessary to slightly tilt one side to disengage the glass from engagement with the guides.
In models with back stops, the algorithm is slightly different. First you need to pull out the shelf all the way, then lift its front part up at an angle of about 30-40 degrees. After this, the shelf will easily disengage from the rear clamps. Be careful, the glass is heavy and can slip out of your hands.
☑️ Algorithm for removing the glass shelf
If the shelf is equipped with a decorative edging, Be careful not to catch it on the protrusions inside the camera. Some models have special stoppers that prevent the shelf from falling out if the door is not closed carefully. In such cases, you may need to press the locking tab located on the side.
Removing lattice and plastic elements
Metal grilles in refrigerators Position are usually easier to remove than glass inserts, but they have their own characteristics. They are often installed in the same guides as glass, but may have additional plastic stops along the edges.
To remove the grille, grasp the front crossbar with both hands. Lift it slightly and pull it forward. If the grille is long, you may have to tilt it diagonally to get the rear ends out of the grooves. The plastic from which the stops are made can be brittle in the cold.
Plastic balconies on the door are removed by pressing on the latches or lightly tugging upward, depending on the design of the particular model. Not twist plastic, as it can deform or crack under load.
| Element type | Fixation method | Direction of movement | Features |
|---|---|---|---|
| Glass shelf | Side guides | Up and towards you | Requires caution due to weight |
| Metal grille | Grooves in the walls | Up and forward | May have sharp edges |
| Plastic tray | Latches or stops | Up or pressing | Brittle material at low temperatures |
| Bottle shelf | Door guides | Up | Often completely removable |
When installing the elements back, make sure that they fit into the grooves until they click or stop. A loose fit can lead to misalignment and subsequent drop of the contents. Regular checks Reliable fastening will extend the life of internal components.
Features of models with the No Frost system
Refrigerators Pozis with the system No Frost have a more complex internal architecture. It is important here not to damage the air circulation channels, which are often located behind the rear walls or in special niches. Removing shelves in such models requires special care.
In some modifications, shelves can be integrated into the overall airflow system. Before removing, carefully inspect whether the shelf is blocking the cold air outlets. If the shelf has cutouts or holes, make sure that they line up with the air channels when reinstalling.
Why are the shelves removable in No Frost?
In No Frost systems, removable shelves are necessary to ensure unhindered circulation of cold air throughout the chamber. Closed or improperly installed shelves can disrupt temperature conditions and lead to food spoilage or evaporator freezing.>: In No Frost systems, removable shelves are necessary to ensure smooth circulation of cold air throughout the chamber. Closed or incorrectly installed shelves can disrupt the temperature regime and lead to food spoilage or freezing of the evaporator.
Often, such refrigerators use shelves with perforations or a lattice structure. They are removed similarly to conventional ones, but require more thorough cleaning from dust and small debris that can clog the cells. Use a soft brush to remove dirt from hard-to-reach places.
Cleaning and maintaining removed parts
After successful dismantling, the cleaning stage begins. Glass shelves can be washed with warm water with the addition of a mild detergent Avoid abrasive sponges and aggressive chemicals that can leave micro-scratches or damage the coating.
It is important to remember thermal shock. Do not place a cold shelf from the refrigerator directly under hot water - the glass may break. Allow the part to warm to room temperature for 15-20 minutes before washing. This rule is especially relevant in winter.
Plastic elements and grilles also require careful handling. You can use a baking soda solution to remove stubborn stains. Thoroughly rinse all parts with clean water and wipe dry with a soft cloth before reinstalling.
⚠️ Attention: It is strictly forbidden to use boiling water to wash glass shelves or place them in the dishwasher unless the manufacturer has indicated this option in the instructions. High temperatures can destroy the structure of tempered glass.
While the parts are drying, wipe the inside of the refrigerator compartment with a damp cloth. This is the ideal time to remove crumbs and dust from the runners that are usually hidden under the shelves. Cleanliness of the guides will ensure ease of installation of the shelves back.
Assembling and checking the reliability of installation
Installation of the shelves is carried out in the reverse order. Slide the back ends of the shelf into the guides or stops, then lower the front section smoothly. Make sure that the shelf lies flat and fits snugly on all support points. There should be no distortions or gaps.
Check the stability of the structure by lightly pressing on it with your hand. If the shelf wobbles or makes squeaking noises, it is not installed correctly or the guides are damaged. In this case, it is necessary to remove the element and repeat the installation procedure, paying attention to fixation.
For models with door shelves, make sure that the latches close with a characteristic click. Reliable fixation especially important for heavy bottles of drinks that are stored on the door. Check the condition of the fastenings regularly.
Common problems and their solutions
Sometimes users are faced with a situation where the shelf cannot be removed or, conversely, falls out too easily. If the shelf is stuck, check to see if there is an object or ice blocking it. Do not try to knock it out by force - this will lead to the destruction of the glass.
If the shelf falls out by itself, inspect the side guides. They may have become deformed or worn out over time. In some cases, replacing plastic holders, which can be ordered at service centers, helps. Pozis.
If you notice a crack in the glass, use of such a shelf must be stopped immediately. Even microscopic damage under load can lead to complete destruction of the glass and spoilage of the products below. Replace the damaged element to a new one.
Can glass shelves be washed in the dishwasher?
Pozis refrigerator manufacturers, how As a rule, it is not recommended to wash glass shelves in dishwashers. High temperatures and aggressive detergents can damage the special coating or lead to thermal shock, even if the glass is tempered. It is better to use a hand wash with warm water.
What to do if the shelf cracks during removal?
If a crack appears, carefully collect all the fragments so that they do not fall into the food or under your feet. You cannot use a cracked shelf - it can crumble at any moment. It is necessary to order a new original shelf or a compatible analogue, indicating the exact model of the refrigerator.
How often do you need to remove and wash the shelves?
It is recommended to carry out a general cleaning of the refrigerator by removing all shelves and drawers at least once every 3-4 months. This will prevent the growth of bacteria, the appearance of unpleasant odors and ensure hygienic storage of products.
Why does the shelf wobble after installation?
Wobbling can be caused by improper installation (the shelf is not fully inserted into the grooves), deformation of the guides themselves, or wear of the plastic clamps. Also, the reason may be the uneven floor of the refrigerator itself, which causes the entire body to warp.
Where to buy replacement shelves for Pozis?
Original spare parts and accessories can be purchased at authorized Pozis service centers, specialized stores of spare parts for household appliances, or on official marketplaces. When purchasing, be sure to check the article number or model of the refrigerator.