Owners of household appliances are often faced with the need to carry out general cleaning inside the refrigerator compartment. The question becomes especially relevant how to remove shelves in a Pozis refrigeratorwhen spilled soup or a broken egg requires immediate attention. The design of these units, despite their apparent simplicity, has its own nuances, ignoring which can lead to breakage of fragile elements.
Models of the Russian brand are equipped with various types of internal filling: from classic grilles to complex systems No Frost with hardened glass. Improper dismantling can cause chips, cracks, or seal leaks. In this material, we will analyze in detail the algorithms of actions for various modifications, so that the cleaning process takes place as quickly and safely as possible for your equipment.
Before starting any manipulations, it is strongly recommended to disconnect the device from the power supply. This will not only protect you from electric shock when working with wet elements, but will also allow the compressor to cool, which is especially important if you plan to defrost the freezer at the same time as washing the refrigerator compartment.
⚠️ Warning: The glass of the shelves can be very slippery, especially if it is wet or greasy. Always use dry hands or special rubberized gloves for a secure grip.
Preparation for dismantling and safety precautions
The first step is to completely unload the refrigerator. It is necessary to remove all products, otherwise the weight of the contents may shift the center of gravity of the structure, and when you try to pull out the element, you risk dropping it on the floor. It is better to remove heavy pots and bottles in advance, leaving the chamber empty for unhindered access to all fasteners.
Pay attention to the temperature conditions. If you just turned off the refrigerator, let it sit for 10-15 minutes. A sudden change in temperature, for example, if you start washing cold glass with warm water, can lead to its cracking. Heat resistant glassused in the model Pozis RK-139 or Sviyagahas a high margin of safety, but care never hurts.
Prepare a work space next to the refrigerator. Cover the floor with a soft towel or rug. If during the removal process the shelf does slip out of your hands, the soft backing will save it from destruction. It is also worth preparing a container for washing and soft sponges so as not to use abrasive products that scratch the surface.
☑️ Preparing to wash the refrigerator
Design features of Pozis glass shelves
Most modern models, such as Pozis RK-168 or Worldare equipped shelves made of tempered glass. They look aesthetically pleasing and are easy to clean, but require a special approach when removing. The main feature is the presence of a plastic edging around the perimeter, which often has a relief structure or decorative elements.
Such shelves are secured using special protrusions that fit into grooves on the walls of the refrigerator. In some modifications, these grooves have locking latches, in others, the glass simply lies on the guides. It is important to determine the type of fastening visually before making physical efforts.
- 🔍 Carefully inspect the side edges of the glass: often there are small grooves for fingers that make it easier to grip.
- 🔍 Check for plastic stops on the front that prevent the contents from falling out when closing the door.
- 🔍 Make sure that the shelf is not stuck to the walls due to condensation or frozen food.
If there are traces of ice or sticky dirt on the shelf, do not try to pull it by force. First, carefully run a putty knife or plastic card along the perimeter to separate the glass from the walls of the chamber. This will preserve the integrity of the plastic edging profile.
Algorithm for removing the glass shelf
The process of dismantling the main glass shelf in refrigerators Pozis requires coordination of actions. Since the glass is heavy and bulky, it is better to perform this operation with an assistant, especially in models with large capacity, such as Pozis RK-102. If you are working alone, make sure that nothing prevents you from maneuvering.
Stand directly in front of the open door. Grasp the front edge of the shelf with both hands, gripping the plastic frame. Smoothly lift the front part 1-2 centimeters up. This action is necessary to remove the front supports from the grooves or hooks.
After the front part is raised, without lowering it, pull the shelf towards you. The movement should be confident, but smooth. The rear part of the shelf should freely come out of the rear guides at this moment. If you feel resistance, stop and check if the edge is stuck in the side profiles.
What to do if the shelf is stuck?
If the shelf does not come out, do not use force. Check whether the relief of the rear wall or a protruding element of the cooling system is in the way. Sometimes a slight rocking from side to side while moving towards you helps.
⚠️ Attention: Never tilt the shelf at an acute angle when removing it if the refrigerator door is narrow. You may not calculate the dimensions and break the glass on the end of the doorway.
Dismantling plastic elements and drawers
In addition to glass surfaces, refrigerators Pozis actively use plastic for balconies on the door and lower drawers. Plastic becomes more fragile over time, especially at low temperatures, and therefore requires even more delicate handling than glass.
Plastic balcony shelves on doors are usually attached with latches or simply inserted into grooves. To remove them, you need to lightly press on one of the corners or pull up, depending on the design of the specific model Sviyaga or Biryusa (which often have a similar layout to Pozis). A characteristic click signals the release.
Bottom drawers for vegetables and fruits often have a system of guides. To remove such a box:
- 🥬 Pull the box out all the way.
- 🥬 Lift its front part to disengage from the slides.
- 🥬 Gently pull it towards you, controlling the movement of the wheels or slide.
If the drawer is equipped with a system Zero Zone or has special stops, study the instructions for the specific model. Sometimes it is necessary to press the hidden latches on the sides of the guides to completely release the container.
| Element type | Material | Fixation method | Risk of breakage |
|---|---|---|---|
| Main shelf | Tempered glass | Guide grooves | High (broken glass) |
| Door balcony | ABS plastic | Latch/Insert | Medium (corner crack) |
| Vegetable drawer | Transparent plastic | Guide slides | Low (jumping off) |
| Shelf above the freezer | Glass/Plastic | Clamps on the sides | High (difficult access) |
Nuances for models with the No Frost system
In refrigerators Pozis with a system No Frost the internal space can be organized differently. Composite shelves consisting of two or three parts are often found here. This is done for ease of height adjustment and washing. If you see a joint in the middle of the glass surface, then the shelf can be separated.
To separate a composite shelf, find the central connection. There are usually small levers or protrusions there. By moving the halves apart, you get two separate, smaller pieces that are much easier to wash in the sink and dry.
Also in such models it is important not to damage the back wall where the air circulation channels are located. When removing shelves, be careful not to touch the plastic evaporator grilles. Any scratch on the inner lining of the chamber can break the tightness of the thermal insulation in the long term.
Cleaning and proper installation back
After successful dismantling, the cleaning stage begins. Use warm water with the addition of a mild detergent or soda solution. Aggressive chemistrycontaining acids or chlorine can damage the plastic edging profile, making it cloudy or brittle.
Rinse all elements thoroughly and, critically, dry wipe them. Moisture on the shelf during installation may cause food to freeze in the future or create an unpleasant odor. Make sure that the glass is completely dry, especially in the places of contact with the plastic frame.
Installation is carried out in the reverse order:
- Insert the back of the shelf into the far grooves.
- Lift the front edge and push it until it clicks or stops.
- Check the stability: the shelf should not wobble or be skewed.
⚠️ Attention: If after installation the shelf is uneven, it means that it is not completely seated in the grooves. Remove it and repeat the procedure, making sure that the guides are clean and free of debris.
Frequently asked questions (FAQ)
Can the shelves of the Pozis refrigerator be washed in the dishwasher?
The glass part can be washed if the water temperature does not exceed 40-50 degrees. However, it is better to wash plastic edging and all-plastic elements by hand, as hot steam and aggressive tablets can deform the plastic or make it brittle.
What to do if a shelf in the refrigerator breaks?
Do not try to glue glass together - it is not safe for food. Order an original spare part for your refrigerator model Pozis or contact the service center. Using non-original glasses can lead to their destruction under the weight of food.
How to remove the smell from plastic boxes after defrosting?
Use a vinegar solution or activated carbon. After washing, wipe the drawers with a rag soaked in a weak vinegar solution and leave to air in the open air for several hours.
Why does the shelf fall out when the door is closed?
Most likely, it is not installed correctly in the guides or the plastic stop at the front is broken. Check the integrity of the fastening elements and make sure that the shelf is horizontal.