Refrigeration equipment of a German brand Liebherr
Owners of premium appliances are often faced with the need to remove the internal container for general cleaning or eliminating foreign odors. Proper dismantling avoids damage to plastic elements and glass shelves, which can be fragile if handled carelessly. The process of removing a drawer in a Liebherr refrigerator has its own technical nuances, depending on the specific model and guide system.
Let's consider the main methods that allow you to safely remove the lower storage sections. Understanding the design of the opening mechanism is the key to success and maintaining the product warranty. You should not use excessive physical force, as this can lead to breakage of the fixing clips or deformation of the runners.
Design features of Liebherr storage systems
The company's engineering is focused on ergonomics and durability, so drawer systems in different lines may differ significantly. In models of the series Comfort i Premium
Particular attention should be paid to the material of manufacture. The plastic used for boxes is highly impact resistant, but at low temperatures it becomes more susceptible to sudden loads. Therefore, if you plan to remove the box in an unheated room in winter, let it warm up. Temperature conditions directly affect the elasticity of polymers.
There is also a division according to the type of bottom. Some models are equipped with a structured bottom SmartSteel
Preparation for removing internal containers
Before you begin active actions, you must properly prepare the work area. Empty the box of products, as the total weight can reach 15-20 kilograms, which will complicate manipulation and increase the risk of falling. Make sure that the refrigerator or freezer door is open as wide as possible, preferably at an angle of 90 degrees or more.
An important step is a visual inspection of the mechanism. In some modifications with the system VarioSpace
☑️ Preparation for dismantling the box
Pay attention to the condition of the door seals. If you keep the door open for a long time while cleaning, the compressor may work harder. Try to perform all manipulations quickly, but without haste. Safety and the safety of products in other chambers is also important.
Algorithm for removing a drawer in the freezer
Procedure for removing freezers containers requires special care due to low temperatures and possible freezing. In standard Liebherr models, drawers slide out on plastic or metal guides. To begin, pull out the drawer all the way. If you feel resistance, do not use force - check if something is blocking the movement.
The key point is the clamps. On the side walls of the box, in the upper part, there are often special latches or stops that prevent the container from flying out with a sharp jerk. To remove the drawer, you must simultaneously lift its front part and pull it towards you. The lifting angle is usually about 15-20 degrees.
⚠️ Attention: If the box is frozen to the guides, do not pry it out with a knife or screwdriver under any circumstances. Use a hairdryer at minimum power or let the ice melt naturally so as not to damage the plastic.
In models with telescopic guides Telescopic
Removing glass shelves above the drawers
Often, for full access to the lower drawers, it is necessary to remove the glass shelf, located above them. In Liebherr refrigerators, shelves can be installed on plastic brackets or in special grooves in the walls of the chamber. If the shelf is on brackets, simply lift its front edge and smoothly pull it forward.
In systems SafetyGlass
| System type | Fixation method | Action for removal | Risks |
|---|---|---|---|
| Standard | Guide skids | Uplift + jerk | Plastic deformation |
| VarioSpace | Sliding frame | Pressing the latch | Falling of the shelf |
| Telescopic | Metal rails | Lifting and removal from the grooves | Damage to the coating |
| SafetyGlass | Stops in walls | Vertical lift | Glass breaking |
After removing the shelf, make sure that the brackets or stops are clean and free of chips. Dirt on the guides may make it difficult to reinstall. Wipe them with a soft damp cloth. Cleanliness of contacts ensures silent operation of the extension mechanism.
What to do if the drawer does not fit into place?
If after cleaning the drawer does not lock in its original position, check that whether the back wall of the camera is warped. Sometimes, if you press hard, the plastic wall of the refrigerator may become slightly deformed. Gently press it from the inside to align the geometry of the seat.">
In rare cases, the problem may be wear of the plastic runners. If you notice cracks or abrasions, it is better to order new parts, as the box may fall when loaded with products.
Specifics of models with the VarioSpace system
Technology VarioSpace
To remove such a drawer, the algorithm changes slightly. First, you need to pull out the underlying glass shelf or remove it completely, freeing up space. Then the drawer is pulled out until it clicks or stops. There may be additional levers on the side walls that block complete removal.
When installing it back. it is important to get the guides into the grooves the first time. If you hear a grinding sound, stop and check the alignment of the angles. Mechanical damage side walls of the chamber can lead to leakage or difficulty closing the door.
Care of storage elements and prevention
After you have managed to remove the drawer in the Liebherr refrigerator, the maintenance stage begins. Plastic containers can be washed with warm water and a neutral detergent. Do not use abrasive sponges, which will leave micro-scratches where bacteria will subsequently multiply. Also avoid boiling water, as a sudden temperature change can cause deformation. data-i="118">Pay special attention to the area of seals and guides. This is where the largest amount of dust and food residues accumulate. Use a soft brush or cotton swabs to clean hard-to-reach places.
Pay special attention to the area of seals and guides. This is where the greatest amount of dust and food debris accumulates. Use a soft brush or cotton swabs to clean hard-to-reach areas. Hygiene of internal surfaces is the key to the absence of unpleasant odors.
⚠️ Attention: Do not use. chlorine-containing products or aggressive chemicals for washing Liebherr plastic boxes. This can lead to discoloration of the plastic and the appearance of microcracks that reduce strength.
After washing, thoroughly dry all elements before installing them back. Moisture on the bottom of the box can lead to the rapid formation of ice when re-freezing. Allow the parts to dry naturally at room temperature. way.
Frequent errors during dismantling and their consequences
One of the most common mistakes is trying to remove a drawer without fully extending it. In models with a system SoftSystem
Another mistake is ignoring the data. If you try to remove a frozen drawer by force, you risk breaking the back wall of the freezer, which is made of thin plastic. Repairing such a breakdown is expensive and difficult. Always defrost the camera completely before attempting to remove jammed elements.
Incorrect installation back is also dangerous. If the box sits askew, it may block the operation of the fan NoFrost
Possible malfunctions and replacement of parts
During operation, plastic elements may wear out. The runners wear out, the clamps lose their elasticity, and the handles may crack. If you notice that the drawer begins to fall out when opening the door or warps, this is a signal that parts need to be replaced. Original spare parts Liebherr
To order the correct spare parts, you will need the exact model of the refrigerator. It is indicated on a nameplate located inside the chamber or on the side wall. Do not try to adapt drawers from other brands - the geometry of Liebherr refrigerators is unique, and a discrepancy of even a couple of millimeters will make use impossible.
Sometimes the article may be erased over time. In this case, it is better to photograph the box from all angles and contact official dealers for visual identification.
FAQ: Frequently asked questions
Why is the drawer in the Liebherr freezer not completely removed?
Most likely, the fallout protection system has worked or the drawer has frozen to guides. Check for ice and try lifting the front of the drawer slightly before fully extending it. Some models require you to press hidden latches.
Can drawers be washed in the dishwasher?
Manufacturer Liebherr
What to do if the drawer handle breaks?
Do not try to glue the handle with regular glue, since at low temperatures the glue will lose its properties. An original spare part must be ordered. You can temporarily use the box, carefully holding it by the body, but it is better not to overload it.
How can you tell that the box is installed correctly after installation?
The box should move smoothly, without jerking or squeaking. It should not warp to one side and should close completely, leaving no gaps between the front panel and the body of the refrigerator.