Refrigerators of the brand Liebherr
famous for their reliable design and thoughtful ergonomics, however, even in the premium segment sometimes there is a need for deep cleaning or rearrangement internal space. Often users are faced with a situation where they need to wash shelves or drawers, but they cannot be removed using standard methods. This can cause confusion, since German engineering provides various fastening systems that are not always obvious at first glance. The correct approach to dismantling will prevent breakage of plastic elements and glass inserts.In this article we will analyze in detail all the nuances of removing containers from different series of refrigerators Liebherr
. You will learn about the differences between systems VarioSpace and standard guides, and also get answers to questions about washing parts in the dishwasher. Understanding the structure of internal shelves will allow you to keep your equipment perfectly clean without the risk of damaging fragile mechanisms. We will consider both conventional models and complex designs with zones BioFresh.Design features of internal shelves Liebherr
Engineers Liebherr
We have developed several types of storage systems, each of which has its own unique mounting features. Most modern models use glass shelves framed in plastic, which can be stationary or retractable. It is important to understand that glass insert it is often a removable element, which greatly facilitates the washing process. The plastic frame can remain in place or be removed separately, depending on the specific series of the refrigerator.One of the key technologies is the system VarioSpace, which allows you to quickly move shelves in height or completely remove them to accommodate large-sized products. In such models, dismantling of drawers and shelves is carried out by simply lifting or compressing special clamps. However, older or budget models may use classic guides that require a certain angle of inclination when extracting. Ignoring these features can lead to jamming of the mechanism.
Freshness zones deserve special attention BioFresh
. The drawers in these compartments often have a more complex design with telescopic guides and additional seals. When removing them, special care must be taken not to damage the plastic slides or rubber gaskets that seal the chamber. Some models are equipped with a system, which also affects the dismantling algorithm. With the system, an ice crust may form on the guides, which blocks movement. In this case, you need to let the ice melt naturally or use a hairdryer at the minimum temperature, directed away from the plastic. An attempt to forcefully pull out a frozen box is guaranteed to lead to breakage of the plastic stops.SoftSystem, which also affects the dismantling algorithm.
Preparing to remove drawers and shelves
Before taking active steps, it is necessary to properly prepare the workspace and the equipment itself. The refrigerator should be unplugged if a lengthy cleaning procedure is planned, although this is not always necessary to simply remove drawers. However, safety comes first, especially if you plan to use water to clean parts near an electrical appliance. Make sure that the floor in the room is dry and level.
Empty the drawers of food. This will not only make the design easier, but will also prevent food spoilage during the procedure. If the refrigerator has a SuperCool or intensive cooling zone, wait until the temperature equalizes so that condensation does not interfere with the grip of parts. It is also recommended to prepare a soft rag and a container for washing in advance in order to immediately place the removed elements there.
☑️ Preparation for dismantling
Visually inspect the fasteners. In some models Liebherr
with the system NoFrost An ice crust may form on the guides, blocking movement. In this case, you need to let the ice melt naturally or use a hairdryer at the minimum temperature, directed away from the plastic. An attempt to forcefully pull out a frozen box is guaranteed to break the plastic stops.Removing glass shelves and dividers
Glass shelves in refrigerators Liebherr
often consist of two parts: tempered glass and a plastic edging. To remove the glass, you need to lift it by the front edge and pull it towards you. In models with the system VarioSpace it may be necessary to simultaneously press the side latches. Do not be afraid to apply moderate force, but act smoothly, without jerking, so that the glass does not slip out of your hands.Plastic frames are even easier to remove. They are usually held in place by snaps at the corners or sides. It is enough to press on the special protrusions Press-to-openif they are provided for in the design, or simply pull the frame up, disconnecting it from the glass base. In some cases, the frame must first be moved to the side and then removed. This allows you to wash each element separately, removing dirt from hard-to-reach corners.
⚠️ Attention: Never put cold glass under hot water - temperature shock can lead to the formation of microcracks or complete destruction of the tempered glass.
If the shelf is equipped with bottle or egg dividers, they can also be removed. Usually they are simply inserted into the grooves and removed in an upward motion. Make sure that the plastic partitions are not warped, as this may make them difficult to reinstall. For models with adjustable height shelves, before removing the glass, it is recommended to lower or raise the guides to the maximum level to ensure easy access.
How to properly remove the drawers of the BioFresh zone
Zone BioFresh
is the heart of many refrigerators Liebherr, and the drawers here are attached especially securely. To remove them, you need to pull out the container completely until it stops. There are often release levers or buttons located on the sides or underneath the bottom of the drawer. By pressing them on both sides at the same time, you will release the drawer from the telescopic guides. After this, you can safely lift it up and remove it from the chamber.In some modifications, for example, in series KB or CN, boxes BioFresh may have a system EasyFresh. Here the mechanism may differ: sometimes it is necessary to slightly lift the front of the box to disengage it from the rails. If the drawer is tight, check to see if food packaging is caught under the guides. Often it is small foreign objects that block smooth movement.
| System type | Fixing mechanism | Removal action | Features |
|---|---|---|---|
| Standard | Guide runners | Pull all the way and lift | Requires smooth extension |
| VarioSpace | Side locks | Press the buttons and pull out | Allows you to change the height |
| BioFresh Plus | Telescopic rails | Press the unlocking levers | Reinforced design |
| SoftSystem | Shock absorbers | Smooth pull towards yourself | Protection against cotton |
After removing the box, inspect the inside of the chamber BioFresh. There may be additional plastic elements or channels for air circulation, which also require periodic cleaning. Do not use sharp objects to remove dirt from inside the chamber to avoid damaging the evaporator or temperature sensors. Gently wipe the surfaces with a soft sponge.
Removing drawers in the freezer
Freezer compartment of refrigerators Liebherr
usually equipped with plastic containers that slide out along guides. The principle of their removal is similar to the refrigerator compartment: full extension, fixation of the stoppers and removal. However, freezing is a common problem here. If the drawer does not slide out, do not use force as this will break the handle or bottom of the container. Let the ice thaw or use warm air.In models with the system NoFrost boxes can be equipped with additional lids or dividers. The covers are usually simply removed with an upward motion. If the drawer has telescopic slides (less common in freezers, but possible in the premium segment), make sure you unlatch the latches before lifting. Plastic becomes more fragile in the cold, so all manipulations should be carried out with extreme caution.
What to do if the box is cracked?
If a crack appears on the plastic box, it is better to replace it. In the freezer, temperature changes will widen the crack and the plastic will finally break down, which can lead to splinters getting into the food.
To wash freezer drawers, use warm water with a neutral detergent. Do not use abrasive powders as they may scratch the plastic and these scratches will then become trapped by dirt and bacteria. After washing, carefully wipe the drawers dry before installing them back to avoid the formation of an ice crust when you turn them on for the first time.
Care of parts and common installation errors
Proper care of the internal elements of the refrigerator Liebherr
extends its service life and maintains hygiene. Glass shelves and plastic drawers, as a rule, can be washed in the dishwasher at a temperature no higher than40°C. However, manufacturers still recommend hand washing to avoid exposure to aggressive chemicals and high temperatures, which can make the plastic cloudy or deform thin fastening elements.
A common mistake during reinstallation is ignoring the guides. When inserting the drawer, make sure it fits into the grooves on both sides at the same time. A skewed drawer can get stuck or damage the sides of the chamber. If you removed a glass shelf, check that the supports are in place before placing heavy foods on the shelf. Uneven load on skewed glass is dangerous.
⚠️ Attention: Specifications and design of models are subject to change. Always check the instructions for your specific device if standard methods do not work.
Regularly check the condition of the seals on the drawers BioFresh. If they have lost their elasticity or are damaged, the tightness of the freshness zone will be broken and the food will spoil faster. When installing, avoid slamming the doors with force, if there is something inside that prevents closing - this can knock the drawers out of the guides. Smoothness is the main principle of operation of equipment Liebherr.
Possible problems and their solutions
Sometimes users are faced with the fact that after installation the drawer wobbles or falls out. This may indicate a breakdown of the plastic guides or wear of the fastening mechanism. In such cases, it is recommended to order original spare parts. The use of non-original components can lead to a violation of the geometry and deterioration of the cooling system.
If the drawer BioFresh no longer closes tightly, check whether the ventilation channels are clogged with food debris. The problem could also be an upside-down tray or an incorrectly installed separator. Carefully inspect the structure: all elements must be level, without distortions. Any resistance when closing is a signal of incorrect assembly.
FAQ: Frequently Asked Questions
Can Liebherr drawers be washed in the dishwasher?
Most plastic drawers and glass shelves Liebherr are allowed Dishwasher safe at temperatures up to 40°C. However, it is better to wash the rubber seals and complex mechanisms of BioFresh drawers by hand to maintain their elasticity and functionality.
What to do if the BioFresh drawer does not extend all the way?
Do not use force. Check to see if contents or ice are blocking the slide out. Some models have a limiter that prevents you from accidentally removing the drawer - you need to press special latches on the sides or bottom.
How to remove a glass shelf if it is stuck?
Make sure that you have correctly identified the type of fastening. If the shelf does not budge, it may be frozen due to high humidity. Give the refrigerator time to defrost. Do not use a knife or screwdriver to loosen the glass.
Where to buy new drawers if the old ones are broken?
Original spare parts for refrigerators Liebherr are best ordered from authorized service centers or official dealers. This guarantees compliance with the model and the quality of the plastic.