How to reduce the temperature in an Indesit refrigerator: adjustment, settings and eliminating causes of overheating

Have you noticed that the food in the refrigerator Indesit spoils faster than usual, and condensation appears on the walls? Or perhaps the freezer isn't making enough ice? The reason most often lies in wrong temperature - too high readings in the main or freezer compartment. But before you grab the regulator and turn it to minimum, it is important to understand: lowering the temperature this is not only a change in the numbers on the panel, but also a set of measures to diagnose the operation of the equipment.

In this article we will look into 7 proven methods reduce the temperature in the refrigerator Indesit —from basic settings to eliminating hidden causes of overheating. You'll learn how to properly set the thermostat, check the seal, optimize food loading, and even diagnose possible problems. And in order to avoid typical mistakes, we have added critical warnings about what can damage equipment if done incorrectly.

Please note: models Indesit (for example, Indesit BIA 18, Indesit DF 4180 or Indesit ITF 118) may have different control systems - mechanical, electronic or touch. The instructions below are universal, but for exact parameters always check your model. user manual your model.

📊 What type of control does your Indesit refrigerator have?
Mechanical (knob/regulator)
Electronic (buttons and display)
Touch (touch panel)
I don’t know

1. Checking the current temperature: standards and methods of measurement

Before changing anything, you need to understand what is the temperature in the refrigerator now whether it meets the standards. For the main chamber Indesit optimal values:

  • 🥛 Freshness zone (0°C - +3°C): for meat, fish, dairy products.
  • 🍎 Middle shelves (+2°C - +5°C): fruits, vegetables, ready-made dishes.
  • 🧀 Door (+4°C - +6°C): sauces, drinks, oil.
  • ❄️ Freezer compartment (−18°C - −24°C): for long-term storage.

How to measure the temperature yourself? Use regular refrigerator thermometer (or street if its range is suitable). Place the device on the middle shelf of the main chamber for 12 hours. An alcohol thermometer in a sealed case is suitable for the freezer. If the readings are higher than normal, proceed with adjustment.

⚠️ Warning: Do not rely on the built-in temperature sensor (if there is one). In budget models Indesit its error can reach ±3°C. For accuracy, use an external thermometer.
Refrigerator area Optimal temperature Signs of incorrect temperature
Top shelf (closer to the freezer) +2°C – +3°C Products freeze slightly, there is frost on the walls
Middle shelves +3°C - +5°C Milk turns sour in 1-2 days, vegetables wither
Bottom drawers (for vegetables/fruits) +5°C - +7°C Greens turn yellow, root vegetables sprout
Door +4°C - +6°C Butter melts, drinks do not cool
Freezer compartment −18°C – −24°C Ice melts, food is covered with ice

2. Adjusting the temperature through the control panel

The most obvious way is to change the settings on the panel. In models Indesit this can be done in three ways depending on the type of control:

Mechanical regulator (knob with numbers 1–5 or 1–7):

  • 🔄 Turn clockwise - decrease in temperature (number increases, cold intensifies).
  • 🔙 Counterclockwise rotation - increase (the number decreases).
  • ⚠️ The optimal position for most models is 3 (average value).

Electronic panel (buttons "+" and "−" or sensor):

  1. Press the button Temp (or Fridge for the main camera).
  2. Buttons +/− set the value +2°C or +3°C.
  3. For the freezer, select Freezer and set −18°C.
  4. Confirm the settings (if required) with the button OK.

Models with a display (for example, Indesit ITF 118 W):

The temperature is displayed on the screen. To change, press Menu → Temp Control and select the desired values. Some models have mode Super Cool —it temporarily lowers the temperature to +1°C for quick cooling (turns off automatically after 6 hours).

Make sure the door is tightly closed

Measure the current temperature thermometer

Check if the Holiday mode is turned on

Turn off the "No Frost" function for 1 hour (if any) to reset-->

⚠️ Attention: If after changing the settings the temperature does not change within 24 hours, this may indicate on thermostat malfunction or refrigerant leak. In this case, a technician's diagnostics is required.

3. rubber bands

One of the most common causes of increased temperature is wear of the door seal. If the rubber band has lost its elasticity, cracks have appeared or it is moving away from the body, warm air constantly enters the chamber. How to check:

  • 📄 Test with paper: close the door by inserting a sheet of paper between the seal and the body. If the sheet is easily pulled out, the seal is broken.
  • 🔦 Visual inspection: check the rubber band for tears, dirt or deformation.
  • 💡 Condensation on the door: if moisture accumulates on the inside of the door, the seal cannot cope.

How to restore the tightness:

  1. Clean the rubber with soapy water and dry.
  2. If the seal is deformed, try heat it with a hairdryer (temperature 50–60°C) and shape it by pressing the door tightly.
  3. In case of serious damage, replace the seal For Indesit original rubber bands fit C00308996 (for models with a height of 160–180 cm) or C00198003 (for compact refrigerators).

4. Optimizing food loading

Many people do not realize that incorrect placement of products can increase the temperature in the refrigerator by 2-4°C. data-i="167">incorrect placement of food

What not to do:

  • 🚫 Place hot dishes (even warm ones) Cool them to room temperature.
  • 🚫 Load the camera more than 70%. Overload interferes with air circulation.
  • 🚫 Store liquids in open containers (they evaporate, increasing humidity).
  • 🚫 Close ventilation holes (if your model has them).

How to distribute products:

  • ⬆️ Top shelves: perishable foods (meat, fish, milk).
  • ➡️ Middle shelves: ready meals, eggs, cheeses.
  • ⬇️ Bottom drawers: vegetables and fruits (except tropical).
  • 🚪 Door: only products resistant to temperature changes (sauces, water, oil).

If the refrigerator Indesit with a system No Frost, do not place food close to the back wall - this will block the flow of cold air. For models with a drip system (for example Indesit BIA 18), leave a gap of 2-3 cm between the products and the wall.

Why can’t you put milk on the door?

The temperature on the door fluctuates from +6°C to +10°C each time it is opened. Milk spoils faster, and lactic acid bacteria multiply 2 times more actively than at +4°C.

5. Cleaning the condenser and rear grill

The rear grill of the refrigerator Indesit (condenser) is responsible for removing heat. If it is clogged with dust, wool or grease, the compressor wears out and the temperature in the chamber rises. How to clean:

Tools: vacuum cleaner with a narrow nozzle, soft brush, damp cloth.

  1. Unplug the refrigerator.
  2. Move it away from the wall (minimum distance - 50 cm for access).
  3. Carefully vacuum the grille, removing dust between the ribs.
  4. Wipe with a damp cloth (no detergents!).
  5. Check that there is a gap of at least 5 cm between the grille and the wall.

For models with No Frost (for example, Indesit DF 5200), you also need to clean ventilation holes inside the camera. They are located on the back wall or under the top shelf. Use a cotton swab soaked in alcohol.

⚠️ Attention: Do not use metal brushes or sharp objects to clean the condenser. Damage to the tubes can lead to freon leakage and breakdown of the compressor.

6. Diagnosis of faults: when you can’t do without a technician

If all of the above methods did not help, the problem may be technical. Here 5 signs of malfunctionfor which professional help is needed:

Symptom Possible cause What to do
The compressor works without stopping, but does not cool Refrigerant leak or capillary tube clogged Call a technician to fill with freon
The refrigerator turns off 5-10 minutes after starting Faulty start relay or thermostat Replacing the relay or thermostat
A thick layer of ice forms on the back wall (in models without No Frost) Clogged drain hole or malfunction of the evaporator Cleaning the drainage or replacing the evaporator
The display shows an error (for example, F05 or H) Failure of the control board or temperature sensor Diagnostics of the electronic module
The refrigerator freezes too much, the food is covered with ice Faulty thermostat or defrost sensor Replacing the sensor or adjusting the thermostat

For models Indesit with electronic control (for example, Indesit ITF 118) if it fails, you can try reset the settings:

1. Disconnect the refrigerator from the network for 10 minutes.

2. Turn on and immediately press the buttons Super Cool + Super Freeze 5. seconds.


3. Wait for the sound signal (if any) - the settings will be reset to factory settings.

7. data-i="239">The temperature in the refrigerator depends not only on the settings, but also on external factors. Consider these nuances:

The temperature in the refrigerator depends not only on the settings, but also on external factors. Consider these nuances:

Influence of climate:

  • 🌡️ In the summer, when the room temperature is above +30°C, the refrigerator operates 20-30% less efficiently. Set the regulator to one notch. colder.
  • ❄️ In winter (if the refrigerator is on an unheated balcony), the temperature in the chamber may fall below normal. Use the mode Holiday or adjust the thermostat.

Location of the refrigerator:

  • 🔥 next to the stove, oven or battery. Minimum distance - 50 cm.
  • ☀️ Avoid direct sunlight (especially important for models with a black body).
  • 🔌 Connect to a separate outlet - power surges can disrupt the settings.

Seasonal settings:

In models Indesit with climate control (for example, Indesit DFE 4200) there is a mode Summer/Winter. In summer, activate Summer for enhanced cooling, in winter - Winter to save energy.

FAQ: Frequently asked questions about the temperature in the Indesit refrigerator

Why in the freezer −12°C instead of −18°C, although the regulator is at maximum?

Several reasons:

  1. Clogged capillary tube (requires cleaning or replacement).
  2. Wear of the compressor (does not develop the required power).
  3. Freon leak (refill required).
  4. Temperature sensor malfunction (in electronic models).

You can independently check only the tightness of the door. The rest is a job for the master.

Is it possible to set different temperatures in the main one. camera and freezer?

Yes, in most models Indesit the camera settings are independent. For example, in Indesit BIA 18:

  • Main camera: regulator Fridge (optimal 3).
  • Freezer: regulator Freezer (optimal 4).

In electronic models (for example, Indesit ITF 118 W), the temperature of each chamber is adjusted separately in the menu.

What to do if the temperature is not restored after defrosting?

First check:

  • Is the door tightly closed (maybe ice or seal is in the way).
  • Is the refrigerator plugged in (sometimes after defrosting they forget to return the plug to the socket).
  • Is it not activated? mode Holiday (in some models it turns on automatically).

If everything is in order, but the temperature does not drop, wait 24 hours - the compressor needs time to return to mode. If after a day there are no changes, call a technician.

How often do you need to defrost the Indesit refrigerator with No Frost?

The system No Frost prevents the formation of ice, but complete defrosting it is recommended to carry out 1-2 times a year for:

  • Cleaning the ventilation holes.
  • Removing plaque and bacteria.
  • Checking the operation of the drainage system.

Even if ice is not visible, condensation can accumulate inside, which impairs cooling.

Why does the Indesit refrigerator make a lot of noise when the temperature drops?

This is normal if:

  • The compressor operates at full power (the first 1-2 hours after changing the settings).
  • The fan No Frost removes ice (characteristic "humming" sound).

But if there is noise accompanied by:

  • Jittering of the housing - a compressor imbalance is possible.
  • Clicking - malfunction of the start relay.
  • Whistling - freon leak.

In these cases, turn off the refrigerator and call specialist.

📖 Read Also

How to set the temperature in the freezer compartment of the Atlant refrigerator: instructions Detailed instructions: how to set the temperature in the Atlant freezer Standards for different models, explained How to reduce the cold in the Atlant refrigerator: instructions Detailed guide on how to reduce the temperature in the Atlant refrigerator. Setting the thermostat, r Which mode to turn on in the refrigerator: settings and tips Which mode to choose in the refrigerator? Find out how to set the temperature, what is eco mode and superz How to set the temperature in the refrigerator Bosch on the display: step-by-step instructions Detailed instructions for setting the temperature in Bosch refrigerators with a display: models with touchscreen Temperature in the DEXP refrigerator: how to set and check Detailed instructions for setting the temperature in DEXP refrigerators Optimal modes. transcript Temperature in the Atlant refrigerator: optimal values What temperature to set in the Atlant two-chamber refrigerator. Setting up the thermostat, modes