Installing shelves in a Liebherr refrigerator: instructions with photos and tips

Refrigerators Liebherr are known for their reliability and thoughtful ergonomics, but even the most advanced models sometimes require reconfiguration of the internal space. Perhaps you bought new appliances and want to optimize product placement, or shelves moved during transportation, or you decided to replace a glass shelf with a more durable one. In any case, the correct installation of shelves is a task that requires accuracy and knowledge of the nuances of a particular model.

In this article we will figure out how to independently install or rearrange shelves in refrigerators Liebherr of different series, including models with the system NoFrost i static cooling. You will learn what tools you may need, how to avoid common mistakes (for example, misalignment or damage to the seals), and what to do if the shelves do not lock into the grooves. We will also give recommendations on load distribution in order to extend the service life of the equipment.

Important: the design of the fasteners may vary depending on the year of manufacture and series of the refrigerator. If your model was released before 2018, check for the presence of metal guides - in new versions they are often replaced with plastic latches with latches.

Types of shelves in Liebherr refrigerators: what they are and how they differ

Before To begin installation, determine what type of shelves you are dealing with. Refrigerators Liebherr use three main options:

• 🔹 Glass shelves with metal frames —the most common. They can withstand loads of up to 25–30 kg (depending on the model), but require careful handling during installation. Often equipped transparent silicone pads for shock absorption.
• 🔹 Plastic shelves - lightweight and moisture-resistant, but less durable. They are found in budget series (for example, Liebherr CUag 3311) or in the area for fruits/vegetables.
• 🔹 Adjustable shelves with sliding mechanisms - typical for premium models (series Premium NoFrost). Allow you to change the height without complete dismantling.

Also, the shelves may differ in the fastening system:

• 🔧 Grooved guides —the shelf is inserted into grooves on the side walls of the refrigerator. Typical for older models.
• 🔧 Latch-latches —the shelf is fixed on plastic or metal hooks. Common in modern refrigerators.
• 🔧 Telescopic slides —the shelf slides out like a drawer (for example, in models Liebherr SBSes 7256).

To accurately identify the type of shelves in your refrigerator, pay attention to the markings on the back. For example, the inscription "GLAS 20 kg" indicates a glass shelf with a maximum load of 20 kg.

Preparation for installation: tools and safety measures

Installing shelves does not require professional tools, but some devices will greatly facilitate the process:

• 🔨 Flat screwdriver - for prying up plastic clips (if the shelves are secured with latches).
• 🧤 Rubber gloves —will protect your hands from the sharp edges of glass shelves.
• 📏 Level (bubble or laser) —will help avoid distortion during installation.
• 🧴 Silicone grease — if the guides are tight (for example, in models Liebherr CNef 4815).

Before starting work, be sure to:

1. Disconnect the refrigerator from the power supply (if dismantling the rear panel or access is required to hidden fastenings).
2. Remove all products and containers - this will prevent damage to the packages.
3. Wipe the inside walls of the refrigerator with a dry cloth - dust or moisture may prevent tight fixation.

⚠️ Attention: Do not use abrasive cleaners to treat the guides. They can damage the anti-corrosion coating of metal parts, which will lead to rust and make it difficult to rearrange the shelves in the future.

Step-by-step instructions: how to remove and install shelves

The installation process depends on the type of fastening. Let's consider the two most common options.

Option 1: Shelves on grooved guides (static models)

This type of fastening is typical for refrigerators Liebherr series CU and CN (for example, CUag 3311 or CN 4013). data-i="111">carefully lift the front edge of the shelf and pull it towards you. If the shelf does not give way, check for additional latches on the back (sometimes they are hidden under rubber plugs).

1. Removing the shelf: Carefully lift the front edge of the shelf and pull it towards you. If the shelf does not budge, check if there are additional latches on the back (sometimes they are hidden under rubber plugs).
2. Installing the shelf: insert the rear edge of the shelf into the grooves on the back wall, then lower the front edge into grooves on the front wall. Make sure that the shelf lies level - misalignment can lead to cracks.

Option 2: Shelves with latches (models with NoFrost)

In refrigerators with the system NoFrost (for example, Liebherr SBSes 7256 or CBNes 5156) the shelves are attached to plastic or metal latches. It is important here not to damage the latches, otherwise the shelf will hang.

1. Removing the shelf: press the latches on both sides of the shelf (usually they are located in the front) and pull the shelf towards you B. On some models, the latches need to be pryed off with a screwdriver.
2. Installation. shelves: Insert the shelf into the grooves until it stops, then press on the front edge so that the latches are locked. Check the reliability of the fastening by slightly pulling the shelf towards you.

Make sure that the refrigerator is unplugged (if required)

Check the integrity of the shelf (no cracks or chips)

Clean the guides from dust and moisture

Prepare tools (screwdriver, level)

Distribute the products so as not to overload one shelf-->

If the shelf is not fixed, check:

• 🔍 Are the grooves on the shelf aligned with the guides on the walls of the refrigerator.
• 🔍 Is there any deformation? plastic clamps (a common problem after long-term use).
• 🔍 Do the door seals interfere (sometimes they move and block the grooves).

Common mistakes and how to avoid them

Even with the apparent simplicity of the task, many users make mistakes that later lead to breakdowns. Here are the most common ones:

Pay special attention load distribution. In refrigerators Liebherr the lower shelves are usually designed for greater weight (up to 30 kg), and the upper ones - for 10–15 kg. If you plan to store heavy products on the shelf (for example, pots of soup), place them closer to the rear wall - this will reduce the load on the front fastenings.

⚠️ Attention: In models with BioFresh zones (for example, Liebherr CBNes 5756) shelves in this compartment have a special antibacterial coating. Do not use alcohol-containing products to clean them - they destroy the protective layer.

Features of installing shelves in Liebherr refrigerators with NoFrost

Models with system NoFrost (for example, Liebherr SBSes 7256 or CBNes 5156) have their own nuances when installing shelves:

• 🌬️ Ventilation holes: shelves should not block the holes for air circulation (usually located on the back wall). Otherwise, the cooling efficiency will decrease, and the compressor will work with increased load.
• 🔄 Adjustable shelves: in some models, the shelves can be moved not only in height, but also in depth. For example, in series Premium NoFrost the front of the shelf can be pulled out for ease of access.
• ❄️ Ice makers: if your refrigerator has a built-in ice maker (models Liebherr SBS 86I3), make sure that the shelves do not interfere with the flow of ice into the dispenser.

In refrigerators with NoFrost it is also important to monitor the tightness of the seals. If, after installing the shelves, the door begins to close less tightly, check:

• Whether the seals have moved during installation.
• Whether the silicone linings from the shelves have gotten under them.
• Have they become deformed plastic guides (this can happen if the shelf was inserted with force).

What to do if the shelf is not fixed in the grooves?

If the shelf does not fit into place, check:

1. Alignment of grooves — perhaps you are trying to insert the shelf into the wrong guides.

2. Cleanliness of grooves - sometimes ice or debris accumulates in them (especially in models without NoFrost).

3. Integrity of the fasteners - plastic latches can break over time. In this case, you will need to replace the part (the article number of the fastener is usually indicated in the instructions for the refrigerator).

If the problem cannot be solved, try lightly lubricating the guides with silicone grease (do not use oils!).

How to arrange the shelves for maximum convenience

Proper placement of shelves not only facilitates access to products, but also extends the life of the refrigerator. Here are some recommendations:

• 🥦 Top shelves: ideal for light products - yoghurts, cheeses, sausages. The temperature here is the most stable.
• 🍗 Middle shelves: place here medium-weight products - milk cartons, sauces, semi-finished products.
• 🍲 Lower shelves: the most durable zone is for heavy pots, cans, bottles. In models with BioFresh zones vegetables and fruits are also stored here.
• 🥤 Door shelves: optimal for drinks, eggs, small packages. Do not store heavy bottles here - this may cause the door to warp.

In refrigerators Liebherr with a function SmartSteel (for example, Liebherr SBSes 8663) the inner walls have antibacterial coating. To avoid damaging it, avoid rubbing the shelves against the walls during installation. If you frequently rearrange shelves, use silicone gaskets (they can be purchased at service centers Liebherr).

For families with children or elderly people, it is recommended:

• Install the most frequently used shelves at eye level.
• Use transparent containers for small products - this simplifies the search.
• In models with touch control (for example, Liebherr SBS 86I3), place the shelves so that they do not block access to the panel.

What to do if the shelf is cracked or broken

If the shelf is cracked during installation or operation, do not rush to throw it away. In most cases, it can be repaired or replaced.

Temporary repair of a cracked glass shelf:

1. Carefully clean the crack from fragments and wipe with alcohol.
2. Apply to the crack transparent silicone sealant is suitable (food grade, for example, Dow Corning 732).
3. Secure the shelf tape on the back side and leave for 24 hours.

Such a repair will allow you to use the shelf for several more months, but remember: it will lose some of its strength.

Replacing the shelf:

• Find the shelf article number - it is indicated on the sticker on the back side (for example, 9800578 for glass shelf model Liebherr CN 4013).
• Order a replacement at the official service center Liebherr or on spare parts websites (for example, 4holoda.ru, zapchasti365.ru).
• If the shelf is under warranty, contact the store - some models (Liebherr Premium) have an extended warranty on glass elements.

⚠️ Attention: Do not use epoxy resin or superglue to repair shelves - they are not intended for contact with food and can release toxic substances at low temperatures.

The cost of a new shelf for refrigerators Liebherr varies from 1,500 to 5,000 rubles depending on the model. For example, a glass shelf for Liebherr SBSes 7256 will cost ~3,000 rubles, and a plastic shelf for Liebherr CUag 3311 will cost ~1,200 rubles.

FAQ: Frequently asked questions about installing shelves in Liebherr

Is it possible to change the plastic fasteners on the shelves yourself?

Yes, but for this you will need original spare parts. The article numbers for the fasteners are usually indicated in the instructions for the refrigerator. For example, for the model Liebherr CN 4013 a fastener with the article number is suitable. 9800579. It is better to entrust the replacement to a specialist, since incorrect installation can lead to damage to the guides.

Why did the refrigerator become louder after installing the shelf?

Probably, the shelf moved the door seal or blocked the ventilation holes (in models with NoFrost). Check the tightness of the door closure and make sure that nothing is blocking the air circulation. Also, the hum may occur due to the vibration of a loose shelf - try placing silicone pads under it.

How often do you need to rearrange the shelves for uniform wear?

In refrigerators Liebherr the shelves are designed for a long service life, but for preventative purposes it is recommended to change their location every 6-12 months. This will help avoid deformation of the guides and evenly distribute the load. This is especially true for families where the lower shelves are constantly loaded with heavy products.

Can the shelves be washed in the dishwasher?

Glass. shelves with metal frames (for example, from models Liebherr SBSes) can be washed in the dishwasher at temperatures up to 50°C. Plastic shelves and shelves with antibacterial coating (zone BioFresh) are washed only by hand with warm water and a mild detergent. Avoid abrasive sponges!

What should I do if, after installing the shelves, the refrigerator starts to cool worse?

Most likely, the shelves are blocking the ventilation holes or the temperature sensor. In models with NoFrost check that the back of the shelf is not blocking the air flow. Also, make sure that the food does not touch the back wall - this may interfere with circulation. If the problem persists, reset the refrigerator settings to factory settings (instructions in the section Settings → Service).