C Every equipment owner faces the need to find the identification number of a refrigerator, whether to issue a warranty, call a technician, or clarify the compatibility of spare parts. For Belarusian technology Atlant this is especially relevant, since the brand’s model range is extremely wide, and without the exact code it is almost impossible to select the right part. Users often confuse the commercial name of the model with the technical serial number, which leads to errors when ordering spare parts.
In this article we will look in detail at where exactly the factory sticker is located on various series of refrigerators, what the nameplate looks like and how the article differs from the batch number. Correct identification devices are the first step to competent operation and timely maintenance. Ignoring factory markings can lead to the purchase of unsuitable compressors or control systems.
Knowing the exact code allows you not only to order spare parts, but also to find out the production date, which is critically important when purchasing used equipment or if disputes arise with the service center. We'll cover all possible label locations, including hidden areas that are often overlooked. In addition, you will learn to read encrypted information printed by the manufacturer.
Where the factory sticker is located
The search for identification information begins with a visual inspection of the case. The standard location of the factory sticker (nameplate) for most refrigerator models Atlant is the inner wall of the refrigerator compartment. However, the specific location depends on the year of manufacture and series of the device. In modern models, the label can most often be found on the left side wall inside the main compartment.
If there is no sticker on the side wall, carefully inspect the space above the shelves or on the inside of the refrigerator door. For some built-in models, the nameplate may be shifted to the end of the body, which is visible only when the door is open. In rare cases, especially on old Soviet models or very early series of independent Belarus, the information was duplicated on the back wall of the unit, but you should not rely on this due to inaccessibility.
The sticker is a silver or white plate with printed text that should not be erased with light mechanical impact. If you find a sticker, but the text on it has been erased or it is damaged, you should not try to recover the information yourself - it is better to refer to the documentation.
- 🔍 The left side wall inside the refrigerator compartment is the most common place.
- 🚪 The inner surface of the refrigerator door - often found in new series.
- 📦 The upper part of the inner wall above the top shelf - typical for some two-chamber models.
- 🔙 Rear wall of the case (rare) - relevant for equipment produced more than 15 years ago.
⚠️ Attention: If the sticker is missing or the information on it is unreadable, do not use the data from the receipt or box as the only proof of the model when ordering complex electronic boards - they may differ within the same series.
It is important to understand that the location of the label is regulated by technical standards, but manufacturing tolerances allow the manufacturer to make changes. Therefore, if the usual place is empty, check all the internal surfaces. Sometimes the sticker can be covered with a protective film, which must be carefully removed to see the code.
Deciphering the information on the nameplate
After the sticker has been found, you will see a table with technical characteristics. The most important line for the owner is serial number (S/N) and model. It is this data that service engineers require to select components. The model is usually designated by an alphanumeric code, for example, MXM-1704 or C-1002, where the letters indicate the type of refrigerator, and the numbers indicate the dimensions and functionality.
The serial number is a unique identifier of a specific instance. Unlike the model, which is the same for the entire batch, the serial number is individual. It allows you to track production history and assembly date. The encoding Atlant often contains information about the manufacturer and month of manufacture, which helps determine the age of the equipment even if the receipt is lost.
The climate class, type of refrigerant and its quantity are also indicated on the nameplate. These parameters are critical when filling with freon. Using the wrong type of refrigerant or violating weight standards can damage the compressor. Therefore, rewrite the data completely, not limited to just the model number.
Below is a table with examples of designations that can be found on the nameplate:
| Parameter | Designation | Value |
|---|---|---|
| Model | Model | Atlant MHM 2808-90 |
| Serial number | S/N | 6502345 (example) |
| Refrigerant | Refrigerant | R600a / R134a |
| Weight refrigerant | Charge | 55 g / 120 g |
Pay attention to the line with refrigerant. In old models it was used R134a, in new ones - R600a (isobutane). These gases are not interchangeable, and the oil in the compressor is also different. An error in determining the type of gas from the nameplate can lead to expensive repairs.
Differences between the article number and serial number
A common mistake when ordering spare parts is confusion between the model article number and the serial number. The article number (or model number) is a code indicating the design and configuration. All refrigerators that come off the assembly line with the same characteristics will have the same article number. For example, Atlant 4008-022 indicates a two-chamber refrigerator with a specific design and dimensions.
The serial number, on the contrary, is unique for each device. It can consist of 6-8 numbers and sometimes letters. To order electronics (control modules, thermostats), the serial number or batch code is often required, since within the same model the manufacturer could change component suppliers. Article number needed for selecting plastic, shelves, handles and rubber seals.
If you are ordering a compressor, you will need data from nameplate of the old unit (power, type of refrigerant, starting torque), and not just the name of the refrigerator model. Compressors can change during the production period of one refrigerator model.
- 🏷️ The article number is needed to select the case, shelves and external elements.
- 🔢 The serial number is required for electronics and accurate identification of the year of manufacture.
- ⚙️ Parameters with the nameplate of the compressor itself, and not the refrigerator.
Always check with the spare parts seller which code they need. For some positions it is enough to know the model, for others a photograph of the nameplate is required. This will eliminate the need to return an unsuitable part.
What to do if the sticker is lost or erased
The situation when a nameplate becomes unusable due to moisture, cleaning with aggressive agents or mechanical damage is not uncommon. In this case, you can find out the exact model through the warranty card or product passport, if they are preserved. The full factory index is always indicated there. Information can also be found in the sales contract or receipt if the seller indicated the model there.
If there are no documents, you can try to determine the model visually by comparing the characteristics with the manufacturer's catalog. However, this method is unreliable, since externally identical refrigerators may have different compressors or defrosting systems. For an accurate determination, you can contact an authorized service center - a technician will be able to identify the device using the code of the electronic board or compressor.
Another way is to look for the markings on the packaging, if the box has been preserved. At the end of the cardboard box there is usually a sticker with a full description of the product, including the article number and serial number. This sticker often duplicates the information from the internal label.
⚠️ Attention: Do not try to open the back cover yourself to look for numbers on the control board if you do not have the skills to work with electricity - this can be dangerous and will void the warranty.
As a last resort, if the refrigerator requires repair, the service technician can read the data directly from the control board using diagnostic equipment. This is a paid service, but it guarantees 100% accuracy in determining the modification.
Features of marking of different Atlant series
The Atlant plant has been producing equipment for several decades, and during this time the marking system has changed. On older models made in the 90s and early 2000s, the number may have been stamped on a metal plate attached with rivets. Such plates oxidize over time, and the numbers become unreadable.
Modern series (after 2010) use polymer-based thermal printing, which is more resistant to abrasion. However, it can also suffer from frequent wet cleaning. Particular attention should be paid to models with the system No Frost. They may have several nameplates: one main one on the body, and additional ones on the control unit or evaporator.
When ordering spare parts for older models, it is important to consider that the plant may have modernized the units. Therefore, a refrigerator of one year of manufacture and a similar refrigerator a year later may differ in internal structure. Serial number helps to eliminate these nuances by showing the exact date of assembly.
Below is a checklist of actions to accurately determine the model:
☑️ Checking the refrigerator data
Practical tips for saving data
In order not to waste time searching for information in the future, it is recommended to take several photographs of the nameplate immediately after purchasing the refrigerator. Save them to cloud storage or send them to yourself by email. You can also copy the basic data (model, serial number, date of purchase) into the device passport or into a special section in the smart home application, if the refrigerator supports such a function.
Do not use abrasive cleaners for the inner chamber in the area where the sticker is located. Alcohol-containing solutions can also corrode the paint on the nameplate. If the sticker begins to peel off, carefully secure it with transparent tape, but so that the text remains readable, or re-glue it into the product passport.
Knowing how to find out the refrigerator number Atlant, and the ability to correctly interpret the data from the nameplate is a skill that will be useful to every owner. This will not only simplify maintenance, but will also help avoid mistakes when purchasing accessories and spare parts. Take care of information about your equipment, and it will last longer.
Frequently asked questions (FAQ)
Is it possible to find the number of an Atlant refrigerator on the Internet, knowing only the appearance?
Accurately determine the model only by appearance difficult, since the design of the cases is often repeated in different series. The best place to find the label is inside the camera. If it is not there, you can try using the photo selection service on the official website or the owners forum, but this will only give an approximate result.
What to do if the serial number on the sticker does not match the number in the warranty card?
This is a critical mistake made during the sale. In this case, problems with warranty service may arise. You must immediately contact the store where the equipment was purchased to make corrections to the documents. For guarantee, priority is given to the data on the device's nameplate.
Where is the model number on Atlant built-in refrigerators?
For built-in models, the nameplate is usually located on the inner end of the door or on the side wall inside the refrigerator compartment, closer to the top. Access to it may be difficult due to furniture, so it is better to rewrite the data during installation.
Why do I need to know the type of refrigerant if I am not doing repairs?
This information is needed primarily for environmental safety and proper disposal. However, if the refrigerator breaks down and requires refilling, the technician needs to know the type of gas. Using the wrong refrigerant can destroy the compressor.
Is it possible to restore a worn-out sticker?
Officially, the plant does not provide services for restoring stickers. If the information is erased, the only document confirming the model remains the technical passport (if the number is included in it) or a receipt indicating the model. In controversial cases, an examination is carried out by the service center.