Owners of household appliances Technicians are often faced with the need to find accurate data about their equipment. This may be required to order spare parts, issue a warranty, or simply to clarify the characteristics when searching for instructions. In the case of the products of the Belarusian plant Atlant, identifying the model is the first step to solving most technical issues.
Many users are lost because they do not know where exactly the manufacturer has placed the information plate. The location of the nameplate may differ depending on the year of manufacture and series of the device. Incorrectly read code may lead to the ordering of incompatible parts, which will entail unnecessary costs and loss of time.
In this material we will analyze in detail all possible locations of marking stickers. You will learn to distinguish the serial number from the product article number and understand how to correctly decipher the information about dimensions and functionality encoded in the name.
Where to look for a nameplate with technical data
The manufacturer places the basic information on a special metal or paper sticker, which is often called a nameplate. Most often, this element is located on the inner side wall of the refrigerator compartment. To detect it, you need to open the door of the main compartment and carefully examine the left or right vertical surface.
In some models, especially built-in or compact series, the label may be displaced. Sometimes it is hidden behind the bottom drawer for vegetables or attached to the inside of the door itself. Careful inspection all internal surfaces are the key to success. This sticker should not be confused with an energy efficiency label, which is usually brighter and contains only the energy efficiency class.
⚠️ Attention: Do not try to peel off the label or rub it with aggressive chemicals. If the information is erased, restoring the serial number will be extremely difficult, and sometimes impossible, without opening the case.
If there is no sign on the inner walls of the camera, check the back wall of the device case. To do this, the refrigerator will have to be carefully moved away from the wall. A duplicate label may be glued to the back metal panel, often at the top or bottom, or laser embossed serial number. Also, do not forget to look at the technical passport, if it is preserved: the data is indicated there on the title page.
Structure and explanation of the marking
The Atlant refrigerator model number is not just a set of numbers, but an encrypted description of the characteristics. It usually consists of 7 digits separated by a dot, for example XM 4008.002. Understanding the structure of this code allows you to instantly determine the key parameters of the device without referring to the manual.
The first two digits after the letter designation (or the first two digits in the numerical part) indicate the total volume of the refrigerator and freezer compartments. The next two numbers indicate the usable volume of the freezer. Next comes a number indicating the energy consumption class, and the last two digits are the design or modification number. Decoding These values help you understand whether your model is suitable for installation in a certain niche or whether it meets the stated parameters.
Let's consider an example on a specific model. If you see the code XM 6025.001, then "60" indicates a total volume of about 600 liters (conditionally, depends on the series), "25" is the volume of the freezer, "0" is the energy consumption class, and "01" is a specific modification of the design or control system. Knowing this logic simplifies the search for compatible accessories.
What do the letters at the beginning of the code mean?
The letter designation at the beginning (for example, XM) indicates the type of device: X - refrigeration, M - freezing. The combination XM means refrigeration equipment with a freezer compartment. This is important when searching for spare parts for a compressor or defrost system.
It is important to distinguish between the brand and the factory index. On a store shelf, the model may be called “Atlant MXM 1700”, but in the technical documentation and on the nameplate it will have a longer digital code. It is this complete code that must be entered when searching for spare parts in catalogs.
Differences in the location of markings by series
The Atlant plant has been producing equipment for several decades, and during this time the standards of marking and placement of labels have changed. In older models produced in the 90s and early 2000s, the nameplate was often made of metal and attached with rivets on the back wall or inside the chamber in a visible place.
Modern series, especially those with system No Frost and electronic control, often have stickers integrated into the design of the internal panel. They may be less noticeable, made in the color of plastic. In some cases, in order to see complete information, you have to remove the decorative cover or the lampshade, although manufacturers try to avoid such solutions.
- 🔍 XM 4000-5000 series: Classic location on the left wall of the refrigerator compartment at eye height.
- 🔍 XM 6000 series and higher: Often have an additional sticker on the end doors or inside a niche for eggs.
- 🔍 Built-in appliances: The marking is almost always located on the inner end of the door to be accessible after installation in the set.
If you are the owner of a two-chamber refrigerator with a bottom freezer, also check the inside wall of the freezer compartment. Sometimes, especially in models with the system Full No Frost, duplicate information is placed right there, behind the freezing containers.
Correspondence table of codes and characteristics
To simplify navigation through the model range, below is a table showing the relationship between the first digits of the code and the dimensions of the device. This will help you quickly find your way if the full sticker is damaged, but some of the numbers are readable.
| Model prefix | Refrigerator type | Approximate height | Design features |
|---|---|---|---|
| XM 17xx | Two-chamber | 140-150 cm | Classic layout, drip defrosting |
| XM 40xx | Two-chamber | 160-170 cm | Increased volume, often found in old series |
| XM 42xx | Two-chamber | 160-170 cm | Modernized version, improved insulation |
| XM 60xx | Two-chamber | 200+ cm | Tall models, often with the No Frost system |
| XM 28xx | Single-chamber | 120-140 cm | Only a refrigerator compartment or with a small freezer department |
Using this table allows you to approximately determine the series, even if only the first pair of digits is visible. However, this is not enough to accurately select a compressor or control board - you need a full modification index modification index.
Please note that the dimensions in the table are approximate. Actual dimensions may vary by several centimeters depending on the year of manufacture and the specific modification of the hinges or handle. Always consult official documentation for accurate measurements when installing.
The difference between the serial number and the model article number
A common mistake made by users is confusion between the model number and the serial number (S/N). Both meanings are usually present on the nameplate. Model indicates the type of device; there are thousands of them. The Serial Number is unique for each specific unit produced at the factory.
The serial number is often a long combination of letters and numbers, sometimes including the production date. It is needed to register the warranty and track repair history. The model is needed to find compatible parts. If you order a shelf or filter, you need exactly model article.
⚠️ Attention: When ordering electronics (control boards, sensors), service centers may request both numbers. This is necessary to check the revision of the board, since different components could be used within the same model.
In some cases, especially on older models, the serial number may be stamped on the metal tube of the compressor. This is done so that the unit can be identified even if the main sticker is lost. However, it can be difficult to read this data without a magnifying glass.
What to do if the nameplate is lost or unreadable
Situations when the sticker has worn off due to time, moisture or mechanical damage are not uncommon. If the numbers are not readable, it is too early to despair. There are alternative identification methods. First of all, find the technical passport or warranty card - the model is always indicated there.
If there are no documents, you can try to determine the model by external features and functionality. Compare the button placement, display type, handle shape and internal shelf configuration with catalogs on the official website. Visual similarity often helps narrow down the search to 2-3 options.
- 📸 Take a photo of the interior of the refrigerator and the outer panel.
- 📏 Measure the exact dimensions (height, width, depth) in centimeters.
- 📞 Contact manufacturer support, describing the external signs.
You can also contact an authorized service center. Craftsmen who specialize in repairing Atlant equipment can often determine the model “by eye” by the design features of the evaporator or the location of the pipes. This is especially true for rare or discontinued modifications.
☑️ Check before contacting the service
Frequent errors when searching for information
One of the most common mistakes is searching for a model on the outer side wall of the case. There are often only logos or stickers with brief characteristics that do not contain the full code. Also, users often look for the number on the package, forgetting that the box has long been thrown away.
Another mistake is trying to use the compressor code as a refrigerator model. The motor has its own marking, but it only indicates the type of refrigerant and motor power, and not the model of the entire cabinet. Selection of parts for the compressor is only possible to replace the motor itself, but not for other components.
You should not rely on memory or notes in a notebook made many years ago. Revisions may change annually, and a one-digit difference at the end of the code may indicate the control system or refrigerant type. Always double-check the data directly on the device before ordering.
Is it possible to restore a nameplate if it is completely lost?
Officially, the plant does not issue duplicate nameplates. However, knowing the serial number of the compressor and the approximate production date, the service center can make a request to the factory to restore the production history. This is a paid and lengthy procedure.
Does the country of assembly affect the model number?
The main production is located in Minsk. Models for export may have additional indexes or differences in markings, but the basic code (7 digits) is usually retained. For equipment assembled under license in other countries, the encoding may be different.
Where can I find the instructions if only the model number is known?
The instructions can be downloaded from the manufacturer's official website in the "Support" or "Documentation" sections. Also, manuals are often available on specialized portals for repairing household appliances upon request of the full model code.
Is it true that you can find out the year of manufacture by the model number?
Not directly. The year of manufacture is usually encoded in the serial number (often the first two numbers or letters) rather than in the model number. The model only indicates a series that could be produced for several years.