How to properly turn off the freezer in an Indesit refrigerator: 3 proven methods

Turning off the freezer in the refrigerator Indesit may be needed in different situations: when you are away from home for a long time, to save energy, or if the freezer is temporarily not needed. However, incorrect actions can lead to compressor failure, ice formation in the refrigerator compartment, or even equipment failure. In this article we will analyze all the official and safe ways to turn off the freezer for different models Indesit —from classic two-chamber to modern systems No Frost.

It is important to understand that the process depends on the type of refrigerator: single-compressor or double-compressor, with drip defrosting or No Frost. For example, in models Indesit ITF 118 and Indesit BIAA 13 the algorithm will differ from Indesit DF 5200 with electronic control. We will consider each case separately, and also give recommendations on preparing the refrigerator for shutdown and possible consequences.

1. How to determine the type of your Indesit refrigerator

Before you start turning off the freezer, you need to know exactly what model you have. Not only the shutdown method depends on this, but also possible risks. All refrigerators Indesit are divided into three main categories:

• 🔹 Single-compressor —one motor cools both the refrigeration and freezer compartments (for example, Indesit BIA 10, Indesit ST 167). It is impossible to turn off the freezer completely, but you can set the minimum temperature.
• 🔹 Two-compressor —separate motors for each compartment (models Indesit ITF 118, Indesit PBAA 33). The freezer can be turned off completely without consequences for the refrigeration compartment.
• 🔹 With the No Frost system - automatic defrosting (for example, Indesit DF 4180, Indesit EF 18). It requires a special approach, since the fans continue to work even when the freezer is turned off.

To find out the exact model, look at the sticker inside the refrigerator compartment (usually on the left wall) or on the back panel of the case. Information can also be found in device data sheet or on the official website Indesit by serial number. If the model cannot be determined, use the universal shutdown method (described in section 3).

2. Disabling the freezer compartment in two-compressor models

Two-compressor refrigerators Indesit (for example, Indesit ITF 118, Indesit PBAA 33 F) allow you to completely turn off the freezer without damaging the refrigerator compartment. This is the safest and easiest way, since each compartment has its own independent cooling circuit.

Disconnection instructions:

1. Open the freezer door and find regulator temperature (usually located on the top panel inside the compartment or on the front side of the case).
2. Turn the dial to position OFF or 0 (in some models - STOP).
3. Wait until the freezer compressor stops (this will take 5-10 minutes). You will hear the motor stop working.
4. Close the freezer door. The refrigerator compartment will continue to operate as normal.

In models with electronic. controls (for example, Indesit DF 5200a touch panel is used instead of a mechanical regulator. To turn off the freezer:

• 📱 Press the button Freezer (or the snowflake icon).
• 🔢 Hold it for 3-5 seconds until the message OFF or — —.
• 🔄 Wait for the sound signal (at some models) or the fan stops working.

Important! After turning off the freezer do not remove the refrigerator plug from the socket - this can lead to a malfunction of the electronic control unit If the freezer is not used for a long time (more than 1 month), once every 2-3 weeks, turn it on for 1-2 hours to prevent oil stagnation in the compressor.

3. Partial shutdown of the freezer in single-compressor models

In single-compressor refrigerators Indesit (for example, Indesit BIA 10, Indesit ST 167), the freezer and refrigerator compartments are connected by one cooling circuit. You cannot completely turn off the freezer, but you can minimize. its operationby setting the highest temperature.

Step-by-step instructions:

1. Find temperature regulator (usually located inside the refrigerator compartment on the top panel or on the right).
2. Turn the regulator to position MIN or 1 (depending on the model).
3. If your model has a separate regulator for the freezer (for example, in Indesit C 132 G), set it to OFF or 0.
4. Wait until the temperature in the freezer will rise to –5°C (this will take 6-12 hours).

In refrigerators with electronic control (for example, Indesit EF 18):

• 📉 Press button Temp or Freezer.
• 🔢 Using the buttons +/– set the freezer temperature to +8°C (maximum value).
• 🔄 Confirm the settings with the button OK.

⚠️ Attention: In this mode, the refrigerator compartment may work less efficiently, since the compressor will turn on less often. If you notice that the food in the refrigerator begins to deteriorate faster, return to standard settings.

4. Features of turning off the freezer in No Frost systems

Refrigerators Indesit with the system No Frost (for example, Indesit DF 4180, Indesit EF 20) require a special approach. They circulate air using fans that can continue to operate even when the freezer is turned off. This can lead to icing of the evaporator if the rules are not followed.

How to properly turn off the freezer. in No Frost:

• 🔧 If the model is two-compressor (for example, Indesit ITF 118 NF), turn off the freezer as described in section 2.
• 🌡️ In single-compressor models (Indesit DF 5200) set the freezer temperature to +8°C via the electronic panel.
• ❄️ Once every 1-2 weeks, turn on the freezer mode for 2-3 hours Super Freeze (if available) to prevent ice from forming on the evaporator.
• 🚫 Do not disconnect the refrigerator from the network - this may cause a malfunction of the system No Frost.

In models with Full No Frost (full No Frost on both chambers), when the freezer is turned off, the refrigerator compartment fan may start working more intensely. This is normal, but can increase energy consumption by 10–15%.

What will happen if you completely disconnect the No Frost refrigerator from the network?

If completely disconnected from the outlet, the No Frost system may fail due to stagnation of oil in the compressor. There is also a risk of icing of the evaporator when turned on again, as the fans will begin to drive warm air through the frozen channels.

5. Possible problems and how to avoid them

Incorrectly turning off the freezer can lead to several problems. Let's look at the most common ones and ways to prevent them.

⚠️ Attention: If, after turning off the freezer, the refrigerator compartment begins to cool worse, and the compressor works without stopping, return to standard settings. This is a sign that the system is not designed for long-term operation in this mode.

If you notice that after turning off the freezer, the refrigerator began to consume more electricity, check:

• 🔌 Correct Is the door of the refrigerator compartment closed (the seal may be worn out).
• 🌡️ Is the temperature in the refrigerator compartment set too low (optimal +4...+5°C).
• ❄️ Is there ice on the back wall (a sign of a system malfunction? No Frost).

6. How to turn on the freezer again

Turning on the freezer after a long period of inactivity requires following several rules to avoid breakdowns. data-i="198">, where after inactivity condensation or ice may form on the evaporator. No Frost, where after inactivity condensation or ice may form on the evaporator.

Step-by-step instructions:

1. If the freezer has been turned off for more than 1 month, defrost the refrigerator (even if there is no visible ice).
2. Wipe all surfaces inside the freezer with a dry cloth.
3. Set the freezer temperature control to position –18°C (or Super Freeze, if you need to quickly freeze food).
4. Close the door and wait until the compressor reaches the desired temperature (this will take 4-6 hours).
5. Only after that, load food into the freezer.

For models with electronic control:

• 📱 Press the button Freezer or Temp.
• 🔢 Set the temperature –18°C using the buttons +/–.
• 🔄 Confirm the settings button OK.
• 🕒 Wait for a sound signal (in some models) or a change in the display.

⚠️ Attention: If, after turning on, the freezer does not cool and the compressor runs without stopping, this may indicate a freon leak or a blockage in the capillary tube. In this case, repair required fix the problem yourself. impossible.

FAQ: Frequently asked questions about turning off the freezer

Is it possible to turn off the freezer in an Indesit refrigerator with one compressor?

In single-compressor models, you cannot completely turn off the freezer, since it is connected to the refrigerator compartment by one cooling circuit. However, you can minimize its operation by installing a regulator. on MIN or +8°C (in electronic models). This will reduce the load on the compressor, but will not turn off the freezer completely.

What happens if you leave the freezer turned off for six months?

Long-term shutdown of the freezer (more than 3-6 months) can lead to:

• 🔋 Stagnation of oil in the compressor (risk of breakdown when turned on again).
• 🍄 The appearance of mold or an unpleasant odor inside the chamber.
• ❄️ Formation of condensation and corrosion of metal parts.

It is recommended to turn on the freezer for 2-3 hours once every 1-2 months –18°Cand thoroughly dry the chamber before prolonged inactivity.

Why did the refrigerator become louder after turning off the freezer?

This is normal for models c No Frost. When the freezer is turned off, the refrigerator compartment fan may start working more intensely to compensate for the change in temperature balance. Also possible:

• 🔊 Increased compressor operation due to increased load.
• 💨 Air noise in the air ducts (typical). for Full No Frost).

If the noise does not go away within 2-3 days, check whether the door is closed correctly and whether the mode is turned on Super Cool.

How to turn off the freezer in the Indesit DF 5200 with electronic control?

In the model Indesit DF 5200:

1. Press button Freezer (snowflake) on the control panel.
2. Hold it for 3-5 seconds until the display shows OFF.
3. Wait for the sound signal (one short beep).
4. Close the freezer door.

To turn it on again, repeat the same steps - the current temperature will appear on the display.

Is it possible to turn off the freezer by simply removing the plug from the socket?

No, this is absolutely not allowed! data-i="251">🔌 Malfunction of the electronic control unit.

• 🔌 There is a malfunction in the electronic control unit.
• ❄️ Formation of condensation and corrosion on parts.
• 🛠️ Compressor breakdown when turned on again.

Use only standard methods of turning off the freezer, described in the instructions for your model.