Turning off the freezer in the refrigerator Liebherr may be needed in a variety of situations: from seasonal use to saving energy or preparing for long absence. However, not all users know that this procedure must be carried out taking into account the specific model and type of cooling system. Incorrect actions can lead to equipment malfunctions or even breakdowns.
In this article we will look in detail at how to safely turn off the freezer on refrigerators Liebherr with a system NoFrost, drip defrosting and hybrid solutions. You will learn what settings are hidden in the menu, how to avoid common mistakes, and what to do if the freezer does not turn off using standard methods. We will pay special attention to models with electronic controls and touch panels - their interface often raises questions among users.
Why you may need to turn off the freezer
The freezer is an energy-intensive component of the refrigerator, and turning it off can save up to 30% of electricity. But this is not the only reason why users resort to this measure:
- 📅 Seasonal use. At a dacha or in a country house, a freezer may not be required in winter when food is stored in natural conditions.
- 🔧 Preparation for repairs or moving. Turning off the freezer simplifies transportation and reduces the risk of damage.
- 💰 Savings with rare use. If you freeze food once every few months, maintaining sub-zero temperatures around the clock is irrational.
- 🔊 Noise reduction. Fans and compressors in the freezer compartment are often louder than in the refrigerator compartment.
- 🚨 Emergency situations. For example, if there is a refrigerant leak or a thermostat malfunction.
It is important to understand that completely turning off the freezer is not equivalent to it defrosting. In the first case, the chamber stops cooling, in the second, the ice is only removed. Some models Liebherr allow you to put the freezer into "sleep" mode with minimal power consumption, which is more convenient than turning it off completely.
Preparing the refrigerator to turn off the freezer
Before you start shutting down, you need to properly prepare the refrigerator. This will prevent food spoilage, condensation formation and possible breakdowns:
- Defrost the freezer compartment (if there is ice). Use natural defrosting or function
SuperFrost(if supported by your model). - Remove all food. Even if you plan to turn off the freezer for a short time, move them to the refrigerator compartment or use cooler bags.
- Clean the camera from crumbs, grease and other contaminants. This will prevent unpleasant odors from appearing after turning it on again.
- Check the seals. If the rubber on the door is damaged, moisture may accumulate in the chamber after shutdown.
Pay special attention to models with the system NoFrost. In them, the fans continue to work even when the freezer is turned off, unless the forced air circulation function is deactivated. This can lead to overheating of the refrigerator compartment compressorif the freezer is turned off for a long time.
Remove all food|Defreeze the compartment|Clean the shelves and walls|Check the door seals|Turn off the SuperFrost function (if yes)-->
⚠️ Attention: If your refrigerator Liebherr is equipped with a system SmartDevice (control via application), update the firmware before turning off the freezer. In older versions of the software, there were bugs due to which the refrigerator compartment could spontaneously turn off along with the freezer.
Disabling the freezer in models with mechanical controls
Refrigerators Liebherr with mechanical regulators (for example, series TP or CP) are controlled by rotary switches. In such models, the freezer can be turned off in two ways:
Method 1: Rotary temperature control
On the back wall of the freezer or on the top panel (depending on the model) there is a regulator with marks from 1 (minimum cold) to 7 (maximum) or up to the ••• (disable) icon. To deactivate the freezer:
- Turn the control counterclockwise until it stops.
- Wait until the compressor stops running (can take up to 10 minutes).
- Make sure the fan (if equipped) has also stopped.
Method 2: Turning off the power to the freezer
In some models (for example, Liebherr CTPes 3556>), the freezer and refrigerator compartments have separate power circuits. To disconnect just the freezer:
- Open the bottom panel of the refrigerator (you will need a Phillips screwdriver).
- Locate the fuse box - the freezer is usually connected through a separate fuse on
5Aor10A. - Remove the fuse freezers (not to be confused with the general refrigerator fuse!).
| Refrigerator model | Control type | Method of turning off the freezer | Notes |
|---|---|---|---|
| Liebherr TP 1760 | Mechanical | Regulator on 0 |
Fan turns off automatically |
| Liebherr CTPes 3556 | Mechanical | Fuse F2 (5A) |
Requires access to the rear panels |
| Liebherr GP 1476 | Mechanical | Regulator + switch SuperFrost |
When the freezer is turned off, the refrigerator compartment operates in normal mode |
⚠️ Attention: In models with with one compressor (for example, Liebherr T 1410>), completely turning off the freezer will lead to an increase in the temperature in the refrigerator compartment by 2–4°C. If this is critical, use alternative methods (see the section on electronic control).
Turning off the freezer in electronically controlled refrigerators
Modern models Liebherr (series SBSes, CBNes, IKB etc.) are equipped with touch panels or displays. Here, turning off the freezer is done through the settings menu. Let's consider the process using the example of popular rulers:
Series SBSes and CBNes (Side-by-Side)
On the display of these models:
- Press the button
Menu(orSettings) and hold for 3 seconds. - Select section
Temperature→Freezer. - Press
Offor set the temperature to+8°C(this is the equivalent of turning off). - Confirm selection button
OK.
Series IKB and IK (built-in)
These models use combined control:
- Press and hold the button
SuperCool+SuperFrostsimultaneously for 5 seconds. - A menu of service functions will appear on the display.
- Select
F02(freezer mode) and set the value0. - Save the settings with the button
Set.
In some models (for example, Liebherr SBSes 7256>), after the freezer is turned off, the indicator Alarmmay light up on the display. This is normal - it signals an increase in temperature. To remove it, press and hold the button Alarm Off for 3 seconds.
What to do if, after turning off the freezer, the refrigerator compartment stops freezing?
In models with one compressor (for example Liebherr CUag 3311>) the freezer and refrigerator compartments are connected by a common circuit. If, after turning off the freezer, the refrigerator compartment cools worse, check:
1. Is the Holiday (vacation) mode activated - it automatically increases the temperature in both compartments.
2. Is the fan blocked (in models with NoFrost) - when the freezer is turned off, it should continue to operate at minimum speed.
3. The temperature in the refrigerator compartment - if it rises above +8°C, the compressor may shut down completely. Set the refrigerator compartment regulator to 3–4 (average value).
Features of shutdown in models with NoFrost and SmartFrost
Systems NoFrost and SmartFrost (u Liebherr) have a key difference: they use forced air circulation. When the freezer is turned off, the fans may continue to work, which leads to:
- 🔥 Compressor overheating refrigerator compartment (if the freezer is turned off for a long time).
- 💨 Increased energy consumption due to constant operation of the fans.
- ❄️ Icing of the evaporator (in systems SmartFrost), if the shutdown is carried out incorrectly.
To avoid these problems, follow these steps:
- Turn off the freezer through the menu (as described in the previous section).
- Find the item
VentilationorAir Flowin the settings and set the valueLoworOff. - If there is no such option, open the freezer door and leave it ajar (for example, by placing a wooden spatula). This will reduce the load on the fans.
In models with SmartFrost (for example, Liebherr CBPes 4866>) after turning off the freezer, it is recommended to start the function Defrost manually, even if there is no ice. This will reset the system sensors and prevent false alarms. If your refrigerator supports the mode, use it instead of completely turning off the freezer. In this mode, the freezer goes into energy-saving mode (+10...+12°C), and the refrigerator compartment continues to operate normally. This is safer for equipment and allows you to quickly return the freezer to working condition.
What to do if the freezer does not turn off
Sometimes the freezer continues to work despite all the manipulations with the settings. Let's look at typical causes and ways to eliminate them:
Problem 1: Does not respond to commands from the panel
Possible reasons:
- 🔌 Stuck buttons — try cleaning the panel with alcohol and repeat pressing.
- 🔋 Firmware failure —reset the settings (see instructions for your model).
- 📱 Lock via application (if the refrigerator is connected to Liebherr SmartDevice).
Problem 2: The freezer turns off, but after a while it turns on again
This is typical for models with the function AutoDefrost or SmartControl. To disable auto-renewal:
- Hold the button
SuperFrostfor 10 seconds - this will reset the timer. auto-on. - In the settings menu, find the item
Auto Restartand deactivate it.
Problem 3: Errors are on F2, F4 or F7
These codes indicate faulty sensors or compressor. case:
- Unplug the refrigerator for 15 minutes, then turn it on again.
- If the error remains, check if anything is blocking the fan (in models with NoFrost).
- Contact the service center Liebherr —some errors require diagnostics equipment.
⚠️ Warning: If, after turning off the freezer, the refrigerator begins to make noise clicking or humming, this may indicate that the compressor is trying to start when blocked. Immediately unplug the equipment and check whether the drainage channel is frozen (relevant for models with a drip system).
How to restart the freezer
Turning on the freezer after it has been idle requires caution, especially if it has been unplugged for a long time. Follow this. algorithm:
- Clean the chamber from condensation and possible mold (use a vinegar solution or special products for refrigerators).
- Check the seals —if the rubber has lost its elasticity, warm it with a hairdryer (temperature no higher than 50°C).
- Turn on the freezer through the menu or regulator, setting the temperature to
-18°C. - Do not load products for 2-3 hours - let the system stabilize.
- Activate
SuperFrostfor 6-12 hours for rapid cooling (if the function is supported).
In models with NoFrost after switching on, the noise from the fans may temporarily increase - this is normal. If after 24 hours the freezer does not reach the temperature, check:
- Is the mode turned on
Holiday. - Is the rear grill of the refrigerator blocked (there should be a gap of at least 5 cm for air circulation).
- Is it not working safety thermostat (in this case the display lights up
F1orF3).
Frequently asked questions from users
Is it possible to turn off the freezer without defrosting it?
Technically, yes, but this is fraught with consequences If there is ice in the freezer, when. When turned off, it will begin to melt, and moisture can penetrate the electronics or cause corrosion of metal parts. In models with NoFrost there is less risk, but it is still recommended to remove visible ice.
Will the refrigerator compartment work normally if the freezer is turned off?
Depends on models:
- In refrigerators with two compressors (for example, Liebherr SBSes 7256>) the refrigeration compartment will not be damaged.
- In models with one compressor (for example, Liebherr CUag 3311>), the temperature in the refrigeration chamber can rise by 2–4°C.
If this is critical, use the mode Holiday instead of turning it off completely.
How to turn off the freezer in a Liebherr refrigerator with a display if the buttons do not respond?
Try resetting the settings:
- Unplug the refrigerator for 1 minute.
- Turn it back on and immediately hold down the buttons
SuperCool+SuperFrostfor 10 seconds. - If this does not help, check if child lock is activated (usually unlocked by holding the button
Lockfor 3 seconds).
For models with Wi-Fi (SmartDevice), try controlling via the application.
How much electricity can you save by turning off the freezer?
Savings depend on the model and conditions operation:
- In class refrigerators A+++ (for example, Liebherr SBSes 7256>) - up to 20–25 kWh per month.
- In models of class A+ or lower - up to 40–50 kWh per month.
- In old refrigerators (before 2010) - up to 70–80 kWh per month.
Exact data can be found in the device passport (section Energy consumption).
Is it possible to turn off the freezer in a Liebherr refrigerator during vacation?
Yes, but it is better to use the Holidaymode, if your model has it. Completely turning off the freezer for more than 2 weeks can lead to:
- Drying out. seals.
- The appearance of unpleasant odors (if the chamber was not washed before turning it off).
- Oxidation of fan contacts (in systems NoFrost).
Before leaving, it is also recommended to leave the freezer door slightly open to avoid the formation of condensation.