Modern refrigerators Atlant are reliable and easy to operate, but users are often faced with the need to quickly freeze large quantities of fresh food. In such situations, the standard operating mode may not be enough, and activation of the function is required. intensive freezing. Understanding the operating principles of your unit allows you not only to preserve vitamins in products, but also to extend the service life of the compressor.
The inclusion of the mode depends on the specific series and type of control of your model. The Belarusian manufacturer's line includes both simple mechanical regulators and advanced ones electronic panels with a display. Regardless of the design, the task remains the same: to reduce the temperature in the freezer to minimum values in the shortest possible time.
Incorrect settings can lead to the formation of excessive ice or overload of the engine. That is why it is important to strictly follow the algorithm of actions described in the technical documentation for your specific model Atlant. Below we will analyze in detail all the possible options for activating the deep freezing mode.
⚠️ Attention: Long-term operation of the refrigerator in super freezing mode unnecessarily leads to increased energy consumption. Use this function only when the chamber is fully loaded with fresh food.
Determining the control type of your model
The first step before setting up is to accurately identify the control system of your refrigerator. Models Atlant are divided into two main groups: with mechanical thermostat and an electronic control unit. The set of available functions and the method of activating them depend on this.
If on the front panel or inside the refrigerator compartment you see a rotary knob with numbers from 1 to 7 (or from Min to Max), then you have a mechanical model. In such devices, the “Super Freeze” function is often implemented through a separate button or by moving the regulator to the extreme position, sometimes indicated by an asterisk or a word Defrost.
Electronic models are equipped with a display and touch buttons on the outside of the door. Here, temperature control is accurate to the degree, and the freezing mode is activated by pressing a special key with a snowflake symbol. Digital display allows you to control the process in real time.
Activation of super freezing on electronic models
Owners of refrigerators with electronic The controls are the most fortunate, since the setup process here is as automated as possible. To enable the mode, you need to find a button on the control panel indicated by the symbol * (snowflake) or the inscription Super Freeze.
After pressing the corresponding button, an indicator usually lights up on the display, signaling the transition to the enhanced operating mode. The compressor begins to function without interruption, and the temperature in the freezer drops to -24°C...-26°C. This process can last from several hours to a day, depending on the volume of loaded products.
It is important to know that in most modern models Atlant the super freezing mode is turned off automatically after a certain time (usually after 24-48 hours) or after reaching the set temperature. However, some series require manual shutdown functions after the food is completely frozen.
- ❄️ Find the button with a snowflake or the words Super Freeze on the panel.
- 👆 Press and hold the button for 3 seconds (in some models) until the indicator appears.
- 👀 Make sure that the corresponding activation symbol lights up on the display.
- ⏱️ After 24 hours, check the condition of the products and, if necessary, turn off the mode.
⚠️ Attention: On some models with the No Frost system, prolonged activation of super freezing may cause false defrost sensors triggered. Monitor the display readings.
Setting up mechanical thermostats
If your refrigerator Atlant is equipped with a mechanical regulator, the process looks different. The classic thermostat knob, located inside the refrigerator compartment, usually has a gradation from 1 to 7. To achieve the freezing effect, you need to turn the knob to position maximum cold (number 7 or 8).
In models where a separate freezing function is provided, next to the main one The handle may be a mode switch. By moving it to position Freezing, you force the compressor into continuous operation. In this case, the refrigerator stops cycling on and off.
You should be careful: mechanical systems are less accurate than electronic ones. If you leave the refrigerator in maximum power mode for a long time without loading fresh food, a thick layer of ice may form in the chamber, and the food may dry out. a thick layer of ice, and the food will dry out.
☑️ Check before turning on the freeze
Table of temperature conditions and their influence
Understanding what temperature corresponds to each position of the regulator helps to competently manage the storage process. Below is reference information for standard operating conditions of refrigerators Atlant.
| Knob position | Temperature mode | Recommended use | Energy consumption |
|---|---|---|---|
| 1 (Min) | +8°C ... +10°C | Minimum load, savings | Low |
| 3 (Average) | +2°C ... +5°C | Daily food storage | Average |
| 5 (Max) | 0°C ... +2°C | Hot weather, full load | High |
| Super Freeze | -24°C and below | Fresh food freezing | Maximum |
It is worth noting that the actual temperature inside the chambers depends not only on the settings, but also on ambient temperature. In the summer, when the kitchen is hot, even at medium settings the refrigerator will work more intensely.
Using the mode super-freezing is justified only when you load a large amount of room temperature products into the chamber. If the chamber is empty or filled with already frozen goods, turning on this mode does not make sense and only wears out the equipment.
Features of the No Frost system
Refrigerators Atlant with system No Frost (or "Full No Frost") have their own nuances in the operation of the freezing mode. In such devices, air circulation is forced, which ensures fast and uniform cooling of products on all sides.
When the super freezing function is turned on in No Frost models, the freezer fan operates in increased mode. This allows heat to be removed from fresh food faster than in static systems. However, due to the active movement of air, it is important to pack products correctly to avoid them chairing.
Why does the refrigerator hum in freezing mode?
In intensive freezing mode, the compressor operates continuously, and the No Frost system fan circulates air at maximum speed. This may create increased noise, which is normal for this operating mode.
Another feature is automatic shutdown. The electronics of such models often “understand” that the temperature has reached the desired value and switches the refrigerator to normal operation. You do not need to keep track of the time manually unless the instructions say otherwise.
Common mistakes when setting up
Users often make mistakes that reduce the effectiveness of freezing to zero or even harm the products. The most common of them is placing warm or hot foods in the chamber without first turning on the mode super-freezes. This leads to partial thawing of the stocks already lying there.
Another mistake is dense packing of products close to the back wall or to each other. For efficient operation of the system, especially in models with No Frost, free air flow is necessary. If you block the ventilation holes, the sensors will show the wrong temperature and the freezing mode may not turn on correctly.
- 🚫 Do not load more than 2-3 kg of fresh food at once per freezing cycle.
- 🌡️ Do not set the regulator to maximum on a constant basis - this will reduce the lifespan compressor.
- 📦 Do not fill the chamber “to capacity”, leave space for circulation.
⚠️ Attention: If, after turning on the super freezing mode, the indicator flashes and the temperature does not drop, there may be a depressurization of the circuit or a freon leak. Diagnostics by a specialist is required.
Diagnostics of problems through error codes
Modern refrigerators Atlant are equipped with a self-diagnosis system. If, when you try to turn on the freeze, error codes appear on the display (for example F1, F4 or flashing indicators), this is a signal of a malfunction. Most often, problems are associated with temperature sensors or the defrost system.
For example, a code associated with the evaporator sensor may block the compressor from turning on in enhanced mode, since the system “thinks” that the chamber is already too cold, or vice versa, too warm for normal operation. In such cases, reboot refrigerator (disconnecting from the network for 15 minutes) sometimes helps to reset a temporary electronic failure.
If simple methods do not help and the error repeats, further operation in freezing mode can be dangerous for the equipment. It is better to contact a service center to check the serviceability of the sensors and the integrity of the electrical circuits.
Frequently asked questions (FAQ)
How long should the super-freeze mode work?
Usually it is recommended to turn on the super-freeze mode 4-6 hours before loading the products and leave it running for another 12-24 hours after loading, until the products are completely frozen will freeze. In electronic models, this process is often automated.
Is it possible to turn on super freezing if the freezer is empty?
Technically, you can turn it on, but there is no practical point. It is ineffective to cool an empty chamber to extreme temperatures; this will only lead to excessive energy consumption and unnecessary wear on the compressor without benefit to the products.
Why does the temperature not rise for a long time after turning off the super freeze?
This is a normal phenomenon. After intensive operation of the compressor and fans, the thermal mass of the refrigerator is large. To stabilize the temperature to standard values (for example, -18°C), it may take several hours of operation in normal mode.
Does the freezing mode affect the formation of ice in the refrigerator compartment?
In models with a drip system ("crying evaporator"), operating the compressor without interruptions can lead to more intense ice formation on the rear wall of the refrigerator compartment. In No Frost systems, this effect is minimized due to the circulation of dry air.