Organizing the internal space of the refrigerator Liebherr often becomes a task that requires not only accuracy, but also an understanding of the design of the device. After general cleaning, defrosting or purchasing a new model, owners often encounter difficulties when installing glass partitions. Incorrect installation can lead to damage to the glass or failure of the seal of the drawers, which is critical for maintaining the freshness of products.
In this article we will analyze in detail the process of installing shelves in various models of the German brand, paying special attention to the unique fixation systems. You will learn how to distinguish universal shelves from specialized ones, and why it is important to follow the order of actions when installing elements SmartSteel. A properly assembled refrigerator works more efficiently and lasts longer.
Before starting assembly, you need to make sure that all components are at room temperature. Sudden changes in temperature can cause stress in the glass, which increases the risk of cracking during fixation. Let's look at the main stages of preparation and direct installation.
Preparation for installation and checking components
The first step is a thorough audit of all the elements included in your Liebherr. Factory packaging often contains many small parts that can be easily confused or damaged if opened carelessly. Carefully inspect the glass surfaces for chips, cracks or manufacturing defects.
Particular attention should be paid to plastic guides and metal profiles. They are the ones who bear the main burden. If you notice deformation of the plastic, do not try to forcefully insert such a shelf - this may lead to breakage of the fastening inside the camera. It is better to immediately contact the service center to replace the defective part.
⚠️ Attention: Before installation, be sure to wipe all surfaces with a soft cloth soaked in a mild soap solution. Grease stains or dust can cause food to slip or cause system problems. NoFrost.
Make sure that the refrigerator is installed strictly horizontally. Tilt of the case even by a few degrees can significantly complicate the process of installing shelves and lead to their spontaneous falling out in the future. Use a building level to check the position of the unit.
- 🧼 Thoroughly wash and dry all glass and plastic elements before assembly.
- 🌡️ Allow the parts to warm up to room temperature within 2-3 hours after unpacking.
- 🔍 Check the integrity of the plastic latches and metal guides for absence of cracks.
- 📏 Make sure that the interior of the camera is free of foreign objects and packaging.
☑️ Check before installation
Installation of standard glass shelves
Installation of classic glass shelves in refrigerators Liebherr usually does not cause difficulties, but it has its own nuances. Most models are equipped with a system of guides located on the side walls of the chamber. These guides can be adjustable or fixed, depending on the series of the device.
To install, grasp the shelf with both hands by the short sides, holding the metal frame. Insert the front edge of the shelf into the appropriate grooves, and then smoothly lower the back until it clicks or fits snugly. Do not put pressure on the center of the glass - the load should be distributed evenly along the perimeter.
In some models with the system VarioSpace shelves may have complex geometry with cutouts for tall bottles or boxes. When installing such elements, it is important to observe the orientation: the front part usually has a decorative overlay or marking that should face outward.
Features of tempered glass
The glass in Liebherr refrigerators is specially tempered, which makes it stronger than usual. However, it is sensitive to pinpoint impacts on the ends. Even a microscopic chip on the edge can cause the shelf to crumble due to thermal expansion.
If the shelf does not snap into place the first time, do not use excessive force. Remove it, check the alignment of the guides and try again at a different angle. Often the problem lies in the incorrect position of the side stops.
Installation of the VarioSpace system and composite shelves
Technology VarioSpace allows you to transform the internal space by removing parts of the shelves to accommodate large-sized products. Installation of such composite structures requires special care, since they consist of several independent modules.
First, the main supporting frame or rear part of the shelf is installed. It is fixed in the deep grooves of the side walls. Then the front retractable or removable segment is inserted into special guides. It is important to hear a clear locking sound, indicating that the lock has latched.
| Shelf type | Mounting feature | Maximum load | Compatibility |
|---|---|---|---|
| Standard | Insert from front to back | up to 50 kg | All models |
| VarioSpace | Modular assembly | up to 40 kg | Premium Series |
| Retractable | Rail system | up to 30 kg | Freezers |
| Glass with frame | Fixation in frame | up to 60 kg | Comfort series |
When assembling composite shelves, make sure that the joining seams are even. If you notice a misalignment, it may mean that one of the modules is not inserted all the way. During operation, such shelves may jam or fall out when the door is opened.
Installation of BioFresh boxes and containers
Zone BioFresh is one of the key technologies Liebherrthat ensures long-term storage of fresh products. The boxes in this area have a special design and are installed on special telescopic guides or runners.
The installation process begins with the installation of the lower guides, if they have been dismantled. The box is then inserted at a certain angle: first the back part is inserted into the grooves, after which the box is lowered onto the runners. The front panel should fit snugly against the body of the refrigerator.
In models with the system EasyFresh it is important to correctly install the adjustable humidity damper. It is located inside the drawer or on its front panel. Incorrect drawer installation may block the air circulation necessary for the system to operate.
- 🥦 BioFresh drawers should move smoothly, without jerking or snagging.
- 🔒 Make sure the drawer latches (if any) are latched into the end position.
- 💨 Check that the drawer does not block the cold air openings.
⚠️ Attention: Do not fill BioFresh drawers with products above the level of the marking line. Overfilling can break the seal of the freshness zone and lead to breakage of the guides.
If the drawer is equipped with a closure shock-absorbing system SoftSystemcheck its operation after installation. The door or drawer should close smoothly, without a loud bang. If the mechanism does not work correctly, the drawer may be installed askew.
Attaching door shelves and bottles
Door shelves in refrigerators Liebherr are often removable and adjustable in height. They are attached to special plastic clips, which are inserted into holes on the inside of the door. The design may vary depending on the model.
To install, take the shelf and align the fasteners with the holes on the door. Press until it clicks. Some models are equipped with a mechanism VarioDoorthat allows you to change the installation height without completely removing the shelf, simply by rearranging the stops.
Bottles, especially for tall bottles, may require separate assembly. They are often attached to the main door shelf or have an attachment to the door frame. It is important not to overload the upper shelves of the door with heavy objects, as this creates a large lever on the hinges.
When installing glass sides on the door shelves, make sure that they fit into their seats. This will prevent food from falling when the door is opened. In some cases, the sides are fixed with additional clips.
In models with the DoorCooling+ system, make sure that the installed shelves do not block the air supply channels located in the upper part of the door.Frequent errors and troubleshooting
Even after carefully studying the instructions, users often make common mistakes. One of the most common is an attempt to install a shelf “from top to bottom” where a horizontal insert is provided. This leads to breakage of the plastic stops.
Another mistake is ignoring the protective film. New glass is often covered with a thin layer of film that must be removed before installation. Leaving the film behind may melt from the heat or interfere with a tight fit.
- ❌ Trying to force a shelf that does not fit in freely.
- ❌ Installing a warm shelf in a cold chamber (risk of thermal shock).
- ❌ Ignoring "Front" or "Rear" markings on the component elements.
- ❌ Overloading shelves with products immediately after installation without checking fixation.
If you are faced with the fact that the shelf constantly falls out, check the condition of the side guides. They may be deformed or dirty. It is also worth checking whether the refrigerator itself is level - skewed housing is often the cause of instability of internal elements.
Can Liebherr shelves be washed in the dishwasher?
Most glass shelves and plastic elements Liebherr can be washed in the dishwasher at a temperature not higher 40-50°C. However, it is better to wash metal frames and elements with rubber seals by hand to avoid corrosion or deformation of the rubber.
What to do if the VarioSpace shelf breaks?
Do not try to glue the glass. Order an original spare part, indicating the exact model number of your refrigerator (located on the nameplate inside the chamber). Using non-original glass can be dangerous and interfere with the operation of the cooling system.
How to remove a shelf if it is stuck?
Do not pull sharply. Try slightly heating the plastic guides with a hairdryer (not hot air, but warm air) to make the plastic more elastic. Then gently rock the shelf from side to side while pulling it out.
Why doesn’t the BioFresh drawer close all the way?
Check whether food has fallen under the guides. Also make sure that the box is installed correctly and is not overfilled. If the problem persists, the slide mechanism or the plastic body of the drawer itself may be damaged.