Situation when it is necessary to dismantle or install glass shelf in the refrigeration compartment, occurs among equipment owners Biryusa quite often. Most often this is due to general cleaning, washing the refrigerator compartment, or accidental damage to an element. An incorrect sequence of actions can lead to breakage of plastic guides or even glass breakage, so it is important to clearly understand the structure of the internal space.
The design of refrigerators of this brand, be it classic models with a freezer below or modern ones No Frost systems, involves the use of removable elements for ease of use. However, despite its apparent simplicity, the installation process has its own technical nuances, which cannot be ignored. In this article, we will analyze in detail the algorithm of actions that will allow you to safely and securely fix the shelf in its normal place.
Before taking active steps, you should prepare the workplace and free up space inside the chamber. Make sure the shelf is completely dry if you've just washed it, as wet glass slips and is harder to hold. Also check the integrity of plastic limiters and metal guides attached to the walls of the refrigerator.
Preparation for installation and safety measures
The first step in the installation process is thorough preparation. Glass shelves c refrigerators Turk have significant weight, especially large-volume models, so you need to work with them carefully. If you just took the shelf out of the package or brought it from the balcony in winter, let it sit at room temperature for at least two hours. A sharp temperature change can cause microcracks in tempered glass, which will subsequently lead to destruction.
Inspect the interior of the refrigerator for foreign objects. Make sure that guide railsthe glass into which the glass will be inserted is clean and free of ice or food debris. Any chips or ice build-up can cause misalignment, which will create dangerous stress in the material.
⚠️ Caution: Never force a shelf into place unless it fits in freely. Excessive mechanical stress can lead to chipping of the edge of the glass or breakage of the plastic fasteners on the wall of the refrigerator.
It is also important to check the condition of the glass itself. There should be no chips at the ends, and the surface should be smooth. Pay special attention metal edgingif it is provided for by the design of your model Turk. It serves not only as a decorative element, but also protects the glass from impacts on the walls of the chamber.
Analysis of the design of guides in Biryusa models
Refrigerators Turkish are equipped with different types of shelf fastening systems depending on the year of manufacture and series. Most classic models use metal guides, which are attached directly to the inner wall of the chamber. They are long profiles with curved edges that form a groove for glass.
Modern models may have plastic ones rail systems, which allow you to pull out the shelf like a drawer. Such designs require more delicate handling. It is important to understand what type of grooves you will install the glass into, since the entry angle and the required pressure force will differ.
- 🔹 Classic metal profiles - require precise fit into the groove and horizontal movement.
- 🔹 Plastic slides - often have locking latches that need to be pre-installed unlock.
- 🔹 Combined systems - combine guides and plastic stops on the front.
If your refrigerator has guides installed, make sure they are secured at the same level on both sides. A distortion of even a few millimeters will make installation impossible and dangerous for the integrity of the glass. Check the reliability of fastening the profiles themselves to the body. height adjustable guides, make sure they are secured at the same level on both sides. A distortion of even a few millimeters will make installation impossible and dangerous for the integrity of the glass. Check that the profiles themselves are securely attached to the body.
Step-by-step instructions: how to insert a glass shelf
The installation process begins with the correct positioning of the glass relative to the entrance to the guides. Grab the shelf with both hands by the short sides (ends), making sure your fingers don't slip. Bring the glass to the front of the refrigerator compartment, centering it.
Carefully insert the front edge of the glass into the front grooves of the guides. Do not release the shelf until you are sure it is locked in place at the front. Then, maintaining a horizontal position, smoothly move the glass deeper into the chamber. The movement should be uniform, without jerking.
☑️ Shelf installation algorithm
When the shelf is in place, lightly press on its front part to make sure it is securely fixed. If the design provides locking stops at the front, they should rest against the end of the glass, preventing it from accidentally falling out when opening the door.
⚠️ Attention: When installing a shelf in refrigerators Biryusa with the system No Frost make sure that the glass does not block the ventilation holes on the back wall, otherwise air circulation will be disrupted.
Installation features in refrigerators with the No Frost system
Models Biryusaequipped with an automatic defrosting system No Frosthave a more complex internal geometry. The back wall in them often protrudes forward due to the evaporator and fan located behind it. This means that the depth of usable space may be less than in drip models.
When installing a shelf in such a refrigerator, it is critical to control the depth of immersion of the glass. If the shelf is too long or installed at the wrong angle, it may hit ventilation grille or the temperature sensors. This will lead to a loose fit of the door or damage to the internal components.
Some modifications Turk No Frost use special intermediate frames or plastic sides that are installed on the glass. They need to be mounted after the shelf itself is in place. Make sure that these elements do not interfere with the free flow of air.
Why is it important not to block the ventilation?
In No Frost systems, cold air is pumped by a fan. If the shelf blocks the channels, the temperature in the upper part of the refrigerator will be higher than normal, which will lead to food spoilage and icing.
Solving common installation problems
Often users are faced with a situation where the shelf does not physically fit into place. The most common reason is an attempt to install a shelf wrong side. Glass surfaces in refrigerators Turkish often have rounded corners on only one side or a specific shape of cutouts for hinges.
Another problem is contamination or deformation of the guides. If the profile is clogged with sticky residue, the glass will be difficult to move. In this case, it is necessary to remove the guide (if the design allows), wash it with warm water and detergent and dry it thoroughly before reinstalling it.
If you notice that the shelf wobbles or makes sounds when the door is closed, check that the installation is horizontal. Perhaps one of reference points is overestimated or underestimated. In models with adjustable height, you can rearrange the metal pins to adjacent holes.
| Problem | Probable cause | Solution |
|---|---|---|
| Shelf skewed | Different heights of the guides | Rearrange the pins or align the profiles |
| Glass is not included | Wrong orientation | Turn the shelf over or turn it 180 degrees |
| Strong friction | Dirt in the grooves | Clean the guides and ends of the glass |
| The shelf falls out | Lack of stoppers | Check for the presence of front stops |
Care of glass surfaces and prevention
After successful installation, it is important to ensure proper care of the shelves in order to prolong their service life. The glass in refrigerators Turk is tempered, but it is afraid of abrasive cleaning agents. For washing, use a soft sponge and neutral cleaning solutions.
Check the condition regularly plastic stops. Over time, plastic can become brittle, especially in cold temperatures. If you notice cracks on the clamps, it is better to replace them to avoid heavy products falling.
Do not place hot dishes on the glass shelf. Although tempered glass can withstand extremes, local heating from a pan just removed from the stove can cause destruction of the material. Allow the food to cool to room temperature before placing it in the chamber. thermal shock and destruction of the material. Allow food to cool to room temperature before placing in the chamber.
Can the shelf be washed in the dishwasher?
Technically, tempered glass will withstand the temperature of the sink, but we do not recommend this. Aggressive chemicals and water jet impacts can damage the metal frame or make the glass cloudy. It is better to wash by hand.
What to do if the shelf is cracked?
It is dangerous to use a cracked shelf. Under the weight of food, it can crumble at any moment. You must order an original spare part for your model Biryusa by catalog number.
How to measure a shelf to buy a new one?
Measure the length and width in millimeters. It is important to measure exactly the glass part, without taking into account plastic handles or edging if they protrude beyond the dimensions of the glass. Also pay attention to the shape of the corners.
Can the shelf withstand heavy pots?
The standard load on a refrigerator shelf Turk is about 15-20 kg with even distribution. It is better to place heavy objects (for example, jars of pickles) closer to the edges or at the bottom of the refrigerator.
How to replace a shelf if there is no original?
You can use glass of a similar size with thick edges, cut in a glass workshop. However, the lack of factory hardening and specific shape may reduce safety. This is a temporary solution.