Installing a shelf in a Pozis refrigerator: instructions with photos and tips

Brand refrigerators Pozis are known for their reliability and thoughtful design, but even with them, operational questions sometimes arise. One of the most common tasks is installing or replacing shelves in the refrigerator/freezer compartment. It would seem, what could be simpler? However, improper installation leads to distortions, cracks in the glass, or even breakage of the guides. In this article we will figure out how insert a shelf into a Pozis refrigerator without mistakes, what tools you will need and what to pay attention to when working with different models.

Features of refrigerators Pozis — use modular fastening system, which differs from classic plastic grooves. Here it is important to consider not only the size of the shelf, but also the type of guides (metal or plastic), as well as the presence of clamps. If you have never encountered such a task, our step-by-step instructions and visual cues will help you avoid typical problems.

Before you begin, make sure you have everything you need at hand. Some models require care when working with glass shelves - they can be easily damaged if handled carelessly. And if the refrigerator is new, check the package contents: sometimes the shelves are delivered in separate packaging and require preliminary assembly.

1. Preparation: what you need to know before installation

Before inserting the shelf into the refrigerator Pozis, study the design of your model. Universal instructions have limitations: for example, series Pozis RK-101 and Pozis RK-140 use different types of fasteners. Pay attention to:

• 📏 Shelf size —it must match the internal dimensions of the camera (measure the width and depth of the compartment).
• 🔧 Type of guides —in old models these are plastic grooves, in new ones there are metal slides with latches.
• 🔄 Height adjustment —not all shelves can be moved arbitrarily (there are often fixed positions in the freezer).

If you install glass shelf with metal edging, check the integrity rubber seals around the edges. They prevent the dishes from slipping and protect the glass from chipping. In models Pozis Frost Free shelves often have special recesses for air circulation - they cannot be blocked.

⚠️ Attention: If the refrigerator has recently been defrosted, wait 1-2 hours before installing the shelves. Condensation on the walls can make the guides slippery and the shelf will not lock properly.

Prepare your work area:

• 🧹 Remove all food from the refrigerator (or transfer it to a cooler bag).
• 🔌 Disconnect the device from the network - this will eliminate the risk of short circuit when working with metal parts.
• 📸 Take a photo of the original position of the shelves if you are afraid of mixing them up.

2. Types of shelves in Pozis refrigerators: how to distinguish them

Refrigerators Pozis are equipped with three main types of shelves. Their design affects the installation method:

Glass shelves are the most common, but also the most capricious. Their advantage is durability and ease of maintenance, but if installed incorrectly they can crack under load. Plastic shelves are cheaper, but over time they deform under the weight of heavy products (for example, jars of pickles). Lattice shelves in the freezer usually do not require adjustment, but they are more difficult to clean due to the large number of jumpers.

How to determine the type of shelf you have?

• 🔍 Look at the ends: the metal frame looks like glass shelf.
• 📦 Check the markings on the back side (for example, POZIS-GL-01 - glass, POZIS-PL-02 - plastic).
• 📏 Measure the thickness: glass is usually 5-6 mm, plastic - 3-4 mm.

3. Step-by-step instructions: how to insert a shelf correctly

Consider a universal algorithm for most models Pozis. If your refrigerator is equipped with a system No Frost, skip the steps related to height adjustment - the shelves there are often fixed.

Step 1. Remove the old shelf (if required)

• 🖐️ Lift the front edge of the shelf and pull it towards yourself.
• 🔄 If the shelf does not budge, press the latches on the sides (in models with metal slides).
• ⚠️ Do not pull sharply - the glass shelves may catch on the door seals.

Step 2. Clean guides

Dust and grease on the grooves interfere with proper fixation. Wipe them with a damp cloth and soapy water, then dry. In the freezer, use a plastic scraper to remove ice (if any).

Step 3. Install a new shelf

Algorithm action:

1. Insert the rear edge of the shelf into the grooves on the back wall.
2. Lower the front edge until it rests against the guides.
3. Press the shelf from top to bottom until the latches snap into place (a slight click should be heard).
4. Check whether the shelf is wobbly by pulling it towards you.

For glass shelves with metal edging:

1. Align the metal slides of the shelf with the guides on the walls of the refrigerator.
2. Tilt the shelf at an angle of 10–15° and insert the rear edge into the grooves.
3. Lower the front edge until the slide engages the latches.

⚠️ Attention: If the shelf does not lock into place, do not press harder; you may bend the metal slide. Check whether door seals or products on adjacent shelves are in the way.

4. Common mistakes and how to avoid them

Even experienced users sometimes make mistakes when installing shelves. Here are the most common of them and ways to prevent them:

Error 1: The shelf wobbles or falls out

• 🔧 Cause: The latches do not snap into place due to dust in the grooves or misalignment.
• 🛠️ Solution: Remove shelf, clean the guides and repeat installation, aligning it with the back wall.

Error 2: Cracks on the glass shelf

• 💥 Cause: Sharp load on the edge of the shelf (for example, placing a heavy pan on a corner).
• 🛡️ Solution: Distribute the weight evenly. For heavy items, use the lower shelves.

Error 3: The shelf does not fit into the grooves

• 🔄 Cause: The model of the shelf and the refrigerator do not match (for example, you are trying to insert the shelf from Pozis RK-101 to RK-139).
• 📏 Solution: Check the markings on the shelf and compare with the user manual.

Another typical problem is shelf creaks when movingThis occurs due to the friction of the metal slides on the plastic guides. Solution: lubricate the grooves with silicone grease (do not use oils - they damage the plastic!).

What to do if the shelf cracks during installation?

Don't panic! Pozis glass shelves are made of tempered glass that does not break into sharp pieces! fragments. Carefully remove the shelf, wrap it in thick cloth and dispose of it. To replace it, contact the Pozis service center - original spare parts are covered under warranty (if the refrigerator is new).

5. Adjusting the shelves in height: nuances

Not all shelves in refrigerators Pozis can be moved. In models with a system No Frost (for example Pozis RK-102F), shelves in the freezer often have fixed positions for uniform distribution of cold air. In the refrigerator, adjustment is possible, but with limitations:

How to change the height of the shelf:

1. Free the shelf from the products.
2. Lift the front edge and pull the shelf out of the grooves.
3. Move the latches (if they are removable) to the desired level.
4. Insert the shelf back, making sure that the slides are in the new ones grooves.

In some models (for example, Pozis RK-140) to adjust the height you need to:

1. Press the plastic clips on the sides of the shelf.
2. Move the shelf up/down until it clicks.

Pay attention to minimum and maximum clearances:

• 📉 The bottom shelf should not touch the vegetable drawers (minimum gap is 3 cm).
• 📈 The top shelf should not interfere with closing the door (check that does the seal move freely).

6. Features of installation in the freezer compartment

Freezer compartment of refrigerators Pozis requires a special approach. Here the shelves are often latticed structures or solid plastic panels with fastenings on the back wall. The main differences from the refrigerator compartment are:

• 🧊 The shelves are fixed more rigidly to withstand the weight of frozen items. products.
• ❄️ In models with No Frost the ventilation holes cannot be blocked.
• 🔄 Height adjustment is possible only in some series (for example, Pozis RK-138F).

Instructions for lattice shelves:

1. Remove all the products and defrost the chamber (if there is ice on the fastenings).
2. Pry the front edge of the shelf and pull it up - the fastenings should come out of the grooves.
3. To install, insert the rear edge of the shelf into the upper grooves, then lower the front edge until it clicks.

If the freezer uses solid plastic shelf, its fastenings may differ:

• 🔧 The shelf is fixed with metal hooks or clips.
• 📍 Before During installation, check whether the ventilation grilles are in the way (in models with No Frost).

⚠️ Attention: Glass shelves cannot be used in the freezer - they cannot withstand extremely low temperatures and may burst. If your model Pozis was supplied with a glass shelf in the freezer, this is a manufacturing defect - contact the service center.

7. Replacement of the shelf: when a new part is needed

If the shelf is cracked, deformed or does not fit in the grooves, it must be replaced. In refrigerators Pozis you can do this yourself, but it is important to choose original spare part. Here's how to do it:

Step 1. Determine the shelf model

On the back of the shelf or in the user manual, find the article number For example:

• POZIS-GL-01 - glass shelf. for RK-101.
• POZIS-PL-03 —plastic shelf for RK-85.

Step 2. Buy a replacement

Original shelves for Pozis can be ordered:

• 🛒 In the official online store Pozis.
• 🔧 At refrigerator repair service centers.
• 🌍 On sites like AliExpress or eBay (check compatibility with your model!).

Step 3: Install a new shelf

Follow the instructions from section 3, but keep in mind:

• 🔨 If the fastenings on the new shelf are different, you may need to replace the guides (this is done in the service).
• 📦 Save the packaging and receipt - original spare parts are guaranteed (usually 6-12 months).

The cost of replacing a shelf at a service center Pozis ranges from 800 to 2500 rubles (depending on the model and type of shelf). Installing it yourself will cost less, but if you are not confident in your abilities, install it yourself. It’s better to entrust the work to professionals.

FAQ: Answers to frequently asked questions

Can shelves be washed in the dishwasher?

Glass shelves with metal edging can be washed in the dishwasher not recommended -aggressive detergents can damage the seals and cause corrosion of the metal. Plastic shelves can be washed in a machine, but at a temperature not exceeding 50°C and without using abrasive powders.

Why does a new shelf squeak when moving?

The creaking occurs due to friction of metal the slide on the plastic guides. Solution:

1. Remove the shelf and clean the grooves from dust.
2. Apply silicone grease (sold in hardware stores) to the guides.
3. Install the shelf back and check if there is any play left.

Do not use vegetable oil or WD-40 - they damage the plastic!

How to remove a shelf if it is jammed?

If the shelf does not come out of the grooves:

1. Try to slightly lift the rear edge and pull it towards you.
2. If this does not help, carefully pry the shelf with a plastic spatula (do not use metal objects!).
3. As a last resort, unplug the refrigerator, let it thaw (if the problem is in the freezer) and try again.

⚠️ Do not use excessive force - glass shelves can burst.

Is it possible to use shelves from other brands (Samsung, Atlant)?

Theoretically, it is possible, but only if they match:

• 📏 Dimensions (width, depth, thickness).
• 🔧 Type fastenings (grooves, slides, hooks).
• 🧊 Material (frost-resistant plastics should be used in the freezer).

However, the original shelves Pozis are more reliable - they are designed for a specific model and can withstand the declared loads.

What should you do if, after installing the shelf, the refrigerator begins to operate loudly?

The shelf is probably blocking the ventilation holes (in models with No Frost) or touching the back wall, creating vibration Solution:

1. Check whether the shelf is interfering with circulation. air.
2. Adjust its height or move it forward a little.
3. If the noise does not disappear, remove the shelf and check if the fasteners are deformed.