How to insert a drawer into the freezer of a Beko refrigerator: a complete guide

The situation when, after general cleaning or defrosting, the owner discovers that the plastic container does not fit into place in the freezer occurs quite often. Refrigerators Beko are famous for their ergonomic system No Frostwhich requires precise installation of all components for proper circulation of cold air. If the drawer is inserted crookedly or skewed, this can lead to jamming of the runners, the appearance of extraneous noise from the fan, or even damage to the plastic guides.

In this article we will analyze in detail the design of the freezer compartment, the algorithm for the correct installation of drawers of various types and the nuances characteristic of different series of equipment of this brand. Correct assembly not only provides ease of use, but also extends the service life of extension mechanisms. Ignoring simple installation rules often leads to plastic bursting under load or warping.

Before you begin physical actions, you need to make sure that you understand the principle of operation of your model. In some cases, the problem lies not in a lack of skill, but in the presence of additional elements, such as glass divider shelves or ice trays, which must be installed first. Safety Also important: make sure that the refrigerator is unplugged if you are working inside the chamber, where there is a risk of touching electrical contacts or sensors.

Anatomy of the freezer compartment and types of drawers

Freezer compartments of refrigerators Beko can differ significantly in internal architecture depending on the series and year of manufacture. The main difference lies in the guide system: in some models the boxes are simply placed on plastic rails, in others they are hung on special hooks or runners. Understanding what type mounts is used in your unit is key to a successful installation.

There are several main types of containers. Standard deep boxes are designed for storing bulk products and have a reinforced bottom. Small trays are often used in the upper sections or in models with the Multi Air Flowsystem. Models with a function Freeze Guarddeserve special attention, where the design may include additional partitions to separate temperature zones.

It is important to note that the material from which the boxes are made also plays a role. Modern models use impact-resistant plastic that can withstand extremely low temperatures without cracking. However, if installed incorrectly, even durable material may not withstand mechanical stress.

⚠️ Attention: Never try to force a drawer in if it does not slide in smoothly. Plastic becomes more fragile at low temperatures, and excessive force is guaranteed to lead to breakage of the mounting lugs or guides.

For clarity, let's look at the main differences in designs:

• 🧊 Retractable system on runners: the box has wheels or smooth protrusions that slide along plastic rails on the walls chambers.
• 📦 Hanging system: the container is hung on horizontal slats installed on the side walls of the freezer.
• ❄️ Composite design: the upper part is a glass shelf, which is the lid for the lower drawer, forming a single block.

Preparation for installation: cleaning and checking components

Before inserting the box into the refrigerator freezer Bekoit is necessary to carry out preparatory work. Often the reason that the container does not fit into place is ice on the guides or the presence of foreign objects. Even a small piece of ice or crumbs of food can disrupt the geometry of movement and cause jamming.

Carefully inspect the inside surface of the freezer. If you notice ice on the plastic rails, let it melt naturally or use a hairdryer at a minimum temperature (do not direct hot air for a long time at one section of the plastic). Cleanliness of the guides is the key to silent operation of the system No Frost.

Also check the box itself for integrity. Inspect the bottom and side edges: there should be no cracks, chips or deformations. If the plastic fastening ear is broken off, the drawer will not be able to lock properly and will fall out when the door is opened.

Pay special attention to the glass shelves-lids, if they are provided for in the design of your model. The glass must be clean and dry, and the rubber seals around the edges must be intact. A damaged seal can cause the lid to fit loosely, compromising the seal of the compartment.

Step-by-step instructions: installing a box on skids

The most common type of fastening in models Beko is a system of skids. The installation process here requires precise positioning. First, make sure that the horizontal plastic slats attached to the side walls of the chamber are set at the desired height and are securely fixed.

Grip the box by the top edges with both hands. Tilt the front of it slightly upward so that the rear tabs (or wheels) line up with the beginning of the guides. Slowly lower the back of the drawer until it rests on the rails. The movement should be free, without creaking.

Then, holding the box in a horizontal position, push it inward until it stops. You should feel a slight click or resistance as the front clips snap into place. In some models, you need to press special locking levers on the sides of the drawer so that it latches.

⚠️ Attention: If you hear a grinding sound when moving the drawer, stop immediately. This means that the wheels or runners are not seated in the groove. Trying to push the drawer by force will result in scratches on the plastic and eventual breakage.

What to do if the drawer warps?

If the drawer warps when pulled out, check whether the side guides are installed evenly on the walls of the refrigerator. Often one of the slats moves down during active use. Also check to see if a foreign object has gotten under one of the wheels. Align the position and try again.

After installation, check for ease of movement. The box should move out and back in without jerking. If the movement is tight, it may be necessary to lubricate special silicone compounds for food production, but in new refrigerators Beko this is required extremely rarely.

Installation of a system with a glass shelf-lid

In models with an upper freezer compartment or in the lower compartments of the "box" type, a design is often used where The glass shelf is an integral part of the drawer. In this case, the procedure changes. First, the plastic container itself is installed, and then the glass lid is placed on it.

Make sure that the box is strictly horizontal. Hold the glass shelf by the special handles or edges (use dry hands or gloves to avoid leaving marks). Carefully lower the glass from above, aligning the fasteners on the glass with the grooves on the plastic side of the box.

Fixing the lid occurs due to rotating mechanisms or simple latches. In some models Beko the glass simply lies in the recess around the perimeter. The main thing is not to drop the glass on the plastic bottom of the box, since an impact can cause it to crack and the plastic to become deformed.

There is a common mistake when users try to insert the entire box together with the glass lid. This is only possible in certain models where such assembly is provided outside the refrigerator. In most cases, the dimensions of the assembled unit exceed the dimensions of the freezer doorway.

• 🔍 Check the markings on the glass: it often indicates which side should be facing up.
• 👐 Hold the glass symmetrically with both hands to distribute the weight.
• 🔒 Make sure the lid snaps into place on all four sides if locks are provided.

Installation specifics in models with No Frost and Multi Air Flow

Technology No Frost implies the presence of a complex system of air ducts and fans behind the back wall. The drawers in these refrigerators are often shaped or have holes in the bottom/back to allow air circulation. During installation, it is important not to block these openings.

In systems Multi Air Flow cold air is supplied from several levels. If the drawer is not inserted all the way, the air flow may be disrupted, which will lead to a local increase in temperature and the formation of ice in one corner, while food will freeze in another.

Pay attention to the back wall of the drawer. In models Beko series NeoFrost (separate cooling circuit for the refrigerator and freezer compartments) the requirements for the tightness of the compartments are higher. A loosely closed box can cause excess noise from the fan, which will drive air into the void.

If after installation drawer, you notice that the refrigerator has started to operate louder or a whistle has appeared, check whether the drawer is touching the fan blades (in rare cases when the plastic is severely deformed) or whether the air supply channel is blocked.

Typical errors and troubleshooting

Even following the instructions, users often make mistakes. One of the most common is an attempt to install the box upside down or sideways. Plastic forms are often symmetrical only at first glance. Carefully inspect the bottom: there may be technological holes or stiffening ribs that should look down.

Another mistake is ignoring intermediate shelves. In some configurations Beko the drawer cannot be installed unless a certain glass shelf above it is removed or installed, which serves as a height limiter.

If the drawer fits tightly, do not use a lubricant such as WD-40 or machine oil! This is unacceptable in food chambers. To facilitate movement, you can only use food-grade silicone grease, and then only in extreme cases, when the factory grease has dried out.

⚠️ Attention: If you find a crack on the guide or the drawer itself, you cannot operate the refrigerator in this condition. Plastic fragments can get into food, and a violation of the geometry will lead to breakage of neighboring units. Contact the service center to replace the part.

It is also worth mentioning thermal expansion. Plastic may change its size slightly depending on temperature. If you just defrosted the refrigerator and it is warm, the drawers may fit tighter than when frozen. Let the equipment get into operating mode before drawing conclusions about size incompatibility.

Care for plastic freezer elements

In order for the drawers to last a long time and slide out easily, they need to be looked after. Once every six months, it is recommended to remove all containers and wash them with warm water and a mild detergent. Aggressive chemistry can make plastic dull and brittle.

After washing, be sure to wipe the drawers dry. The remaining water at the fastening points may freeze and “glue” the box to the guides. To remove difficult stains, use a soda solution, which is safe and effective.

Check the condition of the wheels or runners regularly. If they become dirty with grease (which happens when storing meat or fish in open containers), wipe them with a damp cloth. A clean mechanism guarantees quiet operation of your Beko.

• 🧼 Wash the drawers separately from the main chamber to prevent water from getting into the ventilation holes.
• 🌡️ Do not wash plastic parts with hot water (above 50°C), this may cause deformation.
• 🚫 Do not use abrasive sponges, they create micro-scratches where dirt accumulates.

Can the drawers be washed in the dishwasher?

The manufacturer Beko usually does not recommend washing plastic freezer drawers in the dishwasher at high temperatures. Hot water can warp the thin plastic, causing the drawer to no longer fit properly. It is better to use hand washing with warm water.

What to do if the box is cracked?

If the crack is small, you can try to carefully seal it with food-grade silicone or a special glue for plastic that is safe at low temperatures. However, this is a temporary measure. For a long-term solution, you need to order an original spare part according to the model number of the refrigerator.

Why does the drawer move out poorly after defrosting?

Most likely, there is ice or water left on the runners that froze when first turned on. It is also possible that the box was inserted crookedly. Remove it, completely dry the guides and reinstall it, controlling the angle of entry.

How can I find out the model of my Beko refrigerator?

The model number (for example, RCNE520E23ZX) is indicated on a sticker inside the refrigerator compartment (usually on the left wall) or on the back wall of the case. This number is necessary to find compatible drawers.

Is it possible to use a refrigerator without drawers?

Technically it is possible, but not recommended. The boxes provide zoning and, more importantly, proper air circulation in No Frost systems. Without them, cold air will be distributed unevenly, and food may freeze to the walls.