Owners of branded household appliances Pozis often face the need to change the internal configuration of the refrigeration chamber. This may be required to accommodate large pots, baking sheets, or simply for general cleaning. Incorrect installation of glass inserts or plastic grilles can lead to the formation of cracks, damage to the guides, or complete loss of the element when the door slams.
The design of refrigerators Pozis is reliable, but requires careful attention to the geometric features of the fasteners. Depending on the model, be it classic RDH or more modern series DM i RK, fixation mechanisms may have their own nuances. Understanding the operating principle of stops and guides will allow you to avoid breaking expensive tempered glass.
In this article we will analyze in detail the installation process of all types of internal elements. You'll learn how to tell the difference between the top and bottom sides of the glass, where the edges should face, and how to safely remove a part if it gets stuck. The right approach guarantees the long service life of your refrigerator.
Main types of shelves in Pozis refrigerators
Before proceeding with installation, you must clearly identify the type of element you are holding in your hands. Refrigerators Pozis use three main types of horizontal surfaces: classic glass shelves with edging, reinforced racks for the freezer and specialized stands for bottles or vegetables. Each type has a unique fastening system.
Glass inserts are most often framed with a metal or plastic profile, which performs a protective function. It is important to understand that tempered glassused in production has high compressive strength, but is extremely vulnerable to pinpoint impacts at the end. That is why the profile plays a critical role in distributing the load.
Plastic grilles, often found in the freezer compartments of models RF or RD, are equipped with flexible claws. These elements are designed to flex, which allows them to fit tightly in the grooves even with thermal expansion of the plastic. It is a mistake to try to insert them with excessive force without preheating or leveling them.
- 🔹 Glass shelves: have a smooth surface, often with a groove or pattern, and a hard perimeter edge.
- 🔹 Metal grilles: painted steel wire used in freezers is different high thermal conductivity.
- 🔹 Plastic stops: removable elements that prevent products from sliding off when opening the door.
Particular attention should be paid to models with the system No Frost, where air circulation requires gaps. Shelves in such refrigerators Pozis may have special cutouts or perforations that cannot be ignored during installation. Incorrect orientation of such a shelf will disrupt air flow, which will lead to the formation of ice.
Preparation for installation and safety measures
The installation process begins long before you pick up the shelf. The first step should always be defrosting to thoroughly dry the inner chamber. Trying to insert cold glass into a warm refrigerator (or vice versa) creates a thermal shock that can instantly lead to the appearance of microcracks.
⚠️ Attention: Never try to install a shelf if the interior walls of the refrigerator are covered with a layer of ice or condensation. The slippery surface of the guides will not allow the element to be fixed securely, and it may fall under the weight of the products.
The second important aspect is checking the integrity of the guides themselves on the walls of the chamber. Refrigerators Pozis use both built-in plastic runners and hanging metal profiles. Make sure they are not deformed and are securely fastened. If you notice cracks in the plastic, it must be replaced before installing a new shelf.
☑️ Check before installation
It is also recommended to wipe the ends of the glass insert with a soft cloth. Even a small grain of sand caught in a guide groove can become a point of stress concentration. When loaded with food, the glass may burst in this very place. Clean contact surfaces are the key to durability.
Installation of glass shelves in the refrigerator compartment
Installation of the main glass shelf in the refrigerator compartment requires care and adherence to a certain sequence of actions. In models Pozis series RDH i DM a system is often used where the shelf is inserted from front to back or from the side, depending on the location of the stops. The main rule: do not apply force if the element does not fit smoothly.
Grab the glass insert with both hands by the long sides, preferably with protective gloves or dry palms, so as not to leave greasy marks. Bring the shelf to the level of the installed guides. Please note limiting sides: they should look up, creating a barrier for products. If you turn the shelf over, the products will fall out when the door is opened.
Insert the shelf into the grooves at a slight angle. First, bring the far edge (closer to the back wall), then lower the front. In some models Pozis the front clamps have a spring mechanism or require light downward pressure until a characteristic click is heard. Make sure that all four corners of the glass are in their seats.
What to do if the shelf is wobbly?
If after installation you notice play, check whether the front clamps are fully inserted. Sometimes stuck plastic or profile deformation interferes. Do not use glue or sealant for fixation - this will compromise the thermal insulation and may be toxic.>
After installation, check that it is level. You can put a glass of water on the shelf: if the water is near the edge, it means there is a distortion. In refrigerators Pozis height adjustment is usually carried out by rearranging the guides themselves vertically, since they have several height levels.
Installation of grates and drawers in the freezer compartment
Freezer compartment of refrigerators Pozis, especially in two-chamber ones models, often equipped with drawers and metal or plastic bars above them. The installation of these elements has its own characteristics due to low temperatures and the properties of the materials. Plastic becomes brittle in the cold, so it is better to carry out all manipulations quickly, but without jerking.
Metal grids are inserted into special grooves on the side walls of the freezer. They often have bends-clamps round the edges. When installing, it is important to align these folds with the holes or protrusions on the chamber wall. Unlike the refrigerator compartment, here you often need to first insert one side, then, slightly bending the grille in an arc, insert the opposite one.
Drawers (containers) are installed on guide rails. Models RF and RK use a system where the box is simply placed on top of the skids until it stops. However, older or budget series may require snapping of the front decorative façade. Make sure that the box moves freely and does not touch the walls.
| Element type | Installation location | Installation features | Risk of error |
|---|---|---|---|
| Glass | Refrigerator compartment | Input front-to-back | Crack from skew |
| Met. grid | Freezer | Bending during installation | Slipping |
| Plastic. drawer | Lower zone | Hit the runners | Extension blocking |
| Balcony | Door | Press until click | Falling out when slamming |
Cold plastic, if handled carelessly, can crack even with a little effort.
Features of door shelves and stops
Door shelves in refrigerators Pozis are subject to the greatest dynamic load. Constantly opening and closing the door creates inertia, which can eject food if the curbs (called "balconies") are not installed correctly. These elements are usually made of transparent plastic and have a shape that follows the contour of the door.
Installation of balconies is done by inserting the lower protrusion into the groove, and then lightly pressing the upper part until it clicks. Some models, for example Pozis RK-139, use a system where the shelf is placed on top of the vertical door stiffeners. It is critical here not to confuse the top and bottom: the profile of the shelf is often asymmetrical.
⚠️ Attention: If you install shelves on the door, make sure that they do not block the door closing mechanism or the outlet of the air ducts (in No Frost systems). A shelf installed too high may prevent the seal from fitting tightly.
There are often special deep sections at the bottom of the door for bottles. They can be fixed or removable. Removable versions are installed similarly to conventional balconies. Check the secure fit: pull the installed element by hand. If it wobbles, remove and reinstall, clearing the grooves of dirt.
Problem solving: distortions and jams
Even if you follow all the instructions, situations may arise when the shelf is crooked or jammed. In refrigerators Pozis this sometimes happens due to factory play in the plastic guides or deformation of the case during transportation. If you feel resistance, do not press with your entire body weight.
A common problem is glass “biting” between the plastic frame and the wall of the refrigerator. In this case, it is necessary to remove the shelf, inspect the ends for chips and check the geometry of the plastic holders. Sometimes lightly lubricating the guides with food-grade silicone helps, but only if this is permitted by the instructions for your model.
If the shelf falls out when the door is opened, it means that the geometry of the limiting edge is broken or the edge itself is pointing down. In older models, the plastic could “get tired” and lose its elasticity. In this case, you can try to gently heat the plastic with a hairdryer (without overheating!) and bend the limiter in the desired direction, or use pads.
In cases where the shelf is broken and fragments are stuck in the lower guides, use a magnet (if the fragments are small and there are metal shavings) or a vacuum cleaner with a narrow nozzle. Never leave microscopic glass shards at the bottom of the chamber - they can get into food or damage the drawer seal.
Frequently asked questions (FAQ)
Can Pozis glass shelves be washed in the dishwasher?
Yes, tempered glass used in refrigerators Pozisis usually resistant to high temperatures. However, if there are stickers or decorative prints on the glass, they may come off. It is also not recommended to wash shelves with plastic edging in the dishwasher unless they are marked as heat-resistant, as the plastic may become deformed.
What to do if the shelf is cracked, but has not fallen apart?
Use the cracked shelf strictly prohibited. Even a microcrack in tempered glass under food load can lead to instantaneous and explosive destruction of the entire structure. Replace the damaged element with a new original or a high-quality analogue.
Where to buy original shelves for the Pozis refrigerator?
Original spare parts are best ordered from authorized service centers Pozis or from official dealers. When ordering, be sure to indicate the full model name (located on the nameplate inside the chamber), since the dimensions of the shelves may differ even within the same series.
Is it possible to increase the number of shelves if there are additional guides?
Yes, if the design of your model provides additional pairs of holes for the guides, you can install more shelves. However, make sure that the height of the food will allow the door to close tightly without breaking the seal of the chamber.
How to remove a stuck shelf in the freezer?
If the shelf is frozen, under no circumstances tear it off by force. Unplug the refrigerator, open the door and wait for the ice to melt. You can speed up the process by placing a bowl of warm water nearby (do not pour water directly onto the plastic!).