Choosing a Fridge is always a balance between the desired functionality, available budget and kitchen dimensions. The brand Atlant has held a leading position in the CIS market for decades, offering time-tested reliability and affordable service. However, the manufacturer’s model range is so wide that it is easy for an unprepared buyer to get confused in numbers and abbreviations.
Before going to the store or placing an order online, you need to clearly define your needs. You shouldn't overpay for features that you won't use, or, conversely, skimp on critical components such as a compressor. In this material we will analyze all the nuances that will help you make an informed decision.
Determining the dimensions and type of structure
The first step is always measuring the niche for installation. The standard width of most models is 60 cm, however, there are narrow versions with a width of 54-55 cm that fit perfectly into small kitchens. The height can vary from 140 to 205 cm, so a headroom at the top and rear for ventilation is required.
Structurally, the equipment is divided into single-chamber and double-chamber units. Single-chamber models are classics with one door, where the freezer compartment is represented by a small shelf-drawer (usually three stars). Two-chamber options, where the freezer is separated by a blank partition and has its own door, are found much more often in modern interiors.
⚠️ Attention: When measuring the width of the opening, be sure to leave 2 cm on each side for free movement of the doors and thermal gap, otherwise the unit will overheat.
The location deserves special attention freezer. In the brand's catalogs you can find the bottom position (the most popular), the top (classic) and the rare middle. The choice depends on ergonomics: if you rarely use the freezer, it is more logical to choose the lower compartment so as not to constantly bend over.
Type of defrosting system: drip or No Frost
One of the main questions when choosing is the type of defrosting. The traditional drip system (or “crying evaporator”) works automatically in the refrigerator compartment: moisture condenses on the back wall, freezes, and then flows into the drain when the compressor is turned off. In this case, the freezer compartment needs to be defrosted manually once every six months to a year.
System No Frost (or “Windy frost”) completely eliminates the need for defrosting. The fan circulates dry, cold air, preventing the formation of frost. This is convenient, but has its own characteristics: food can air out faster, and the noise level may be slightly higher due to the operation of the fan.
- 💧 Drip system: works quieter, better preserves the natural moisture of food, but requires manual defrosting of the freezer.
- ❄️ Complete No Frost: no ice and frost everywhere, but requires regular cleaning drainage hole.
- 🌬️ Combined: No Frost in the freezer and drip in the refrigerator compartment - the golden mean.
Many users mistakenly believe that in systems with automatic defrosting, food dries instantly. Modern models Atlant equipped with special dampers and freshness zones that minimize this effect. However, for storing open liquids it is still better to use containers with a lid.
Energy consumption class and performance
A refrigerator is an appliance that operates 24 hours a day, 365 days a year, so its energy efficiency directly affects the family budget. Modern brand models are marked with classes A+ i A++. The difference in consumption between class C (older models) and A++ can reach 50% or more.
An important parameter is the freezing performance, measured in kilograms per day. For a standard family of 3-4 people, the optimal figure is 6-10 kg/day. If you are used to making large supplies of meat or berries during the season, look for models with an indicator of 10 kg/day and a function Super Freeze.
| Parameter | Economy segment | Middle class | Premium segment |
|---|---|---|---|
| Energy consumption class | A / B | A+ | A++ |
| Noise level | up to 42 dB | up to 39 dB | up to 36 dB |
| Freezing power | 4-6 kg/day | 6-10 kg/day | 10-15 kg/day |
| Climate class | N (moderate) | SN-T (subnormal tropics) | SN-T (extended) |
Pay attention to the climate class indicated in the passport. For apartments without air conditioning in the summer or for installation in unheated rooms (garage, cottage), an extended range is required SN-T, allowing operation at ambient temperatures from +10 to +43 degrees.
The noise level and type of compressor
The comfort of living in the kitchen directly depends on the acoustic background. The standard noise level for modern models is considered to be 38-41 dB. If you plan to install the refrigerator in a studio apartment or a kitchen-living room where people sleep, it is better to look for models with an indicator of up to 36 dB.
The manufacturer’s line includes both conventional piston compressors and more modern inverter compressors (in the top series). Inverter motor works without constant switching on and off, smoothly adjusting the power. This ensures less wear, silence and energy savings.
⚠️ Attention: Even a quiet refrigerator can hum if it is installed crookedly. Be sure to use adjustable supports to level the case.
It is also worth considering that the noise level declared by the manufacturer is measured in laboratory conditions. In real life, the sound is affected by the resonance of the floor, the proximity of the walls and the fullness of the shelves. An empty refrigerator often makes a little more noise due to the resonance of the internal walls.
Shelf material and internal filling
Internal ergonomics affects convenience daily use. Shelves in modern models Atlant are most often made of tempered glass. They are stronger than their plastic counterparts, do not absorb odors and are easy to clean. An important element is the presence of limiters that prevent bottles from falling when the door is opened.
Pay attention to the lighting system. Incandescent lamps are becoming a thing of the past, giving way to LED backlight. LEDs do not heat up, consume minimal energy and last tens of thousands of hours, which is especially important for refrigerators, where the light is on every time the door is opened.
- 🥛 Door shelves: check the height so that tall bottles (1.5-2 liters) fit there.
- 🥬 Container for vegetables: must be voluminous and airtight to maintain moisture.
- 🍕 Bottle shelf: a convenient recess in the lower part of the body or on the door.
Some models are equipped with an additional freshness zone - a separate compartment with a temperature of about 0°C. This is an ideal place to store fresh meat, fish or chilled drinks that you plan to consume in the next couple of days.
Why are glass shelves better than plastic ones?
Glass has high thermal conductivity and strength. Unlike plastic, it does not turn yellow over time, is not scratched by a knife, and can withstand the weight of a full pot of soup. In addition, glass is more hygienic - bacteria do not multiply in its micropores. data-i="119">, on which fingerprints are less visible.
Design, coverage and control
The appearance of the equipment has become an important selection factor. In addition to classic white enamel, the brand offers models in silver, with a pattern imitating satin or stone, as well as coated options Anti-Fingerprint, on which fingerprints are less visible.
Control can be mechanical (regulator inside the chamber) or electronic. Electronic control with a display on the door allows you to accurately set the temperature, see the current parameters and activate special modes (for example, “Vacation” or “Super Freeze”) without opening the door.
When choosing a color, keep in mind that white models visually expand the space, but require frequent wiping. Silver and graphite shades look more modern and hide minor stains, but may not fit into a classic interior.
⚠️ Attention: The characteristics and equipment of models may change by the manufacturer. Before purchasing a specific modification, check the current data on the official website or in the store.
☑️ Final check before purchase
Frequently asked questions (FAQ)
Which Atlant refrigerator is the quietest?
Models with inverter compressors and an increased layer of thermal insulation have the lowest noise level (up to 36-38 dB). Usually these are two-chamber units with a height of 185 cm in the middle and high price segment.
Is it necessary to defrost a refrigerator with a No Frost system?
Technically, there is no need to remove ice, since the system itself evaporates moisture. However, once a year it is recommended to carry out general cleaning: turn off the device, wash the shelves and treat the drainage hole to prevent the appearance of unpleasant odors and bacteria.
What does the marking of climate class N and SN mean?
Class N (Normal) is intended for operation at room temperatures from +16 to +32°C. Class SN (Sub-Normal) expands the lower limit to +10°C. For Russian conditions, especially if the refrigerator is in the hallway or in the country, a universal class is preferable. SN-T.
Is it possible to place the Atlant refrigerator close to the wall?
No, absolutely not. For normal operation of the condenser (radiator), a heat outflow is necessary. The minimum gap from the back wall to the wall should be 5-7 cm, and at least 2 cm on the sides, otherwise the compressor will work with overload.