Brand refrigerators Pozis are deservedly famous for their reliability and durability, however, even the highest quality equipment requires periodic maintenance. Sooner or later, every owner is faced with the need to carry out general cleaning inside the chamber, remove old stains, or simply rearrange the shelves to accommodate large dishes. It is at this point that the question arises: how to safely remove the internal elements so as not to damage the fragile glass or plastic guides.
Many users mistakenly believe that glass surfaces can simply be pulled out by force, which often leads to unpleasant consequences, such as broken fasteners or, worse, broken glass. The design of modern models Pozis provides for special fixation mechanisms that must be activated correctly. Understanding these nuances will allow you to avoid unnecessary expenses on replacing components and save your nerves during cleaning.
In this article we will analyze in detail the process of dismantling all removable elements, including glass shelves, plastic containers and even doors, if necessary. We will pay special attention to videos and step-by-step descriptions that will help you visualize the process. The correct approach to operation extends the life of your equipment and ensures hygienic storage of products.
Preparation for dismantling and safety measures
Before embarking on the active phase of disassembling the refrigeration cabinet, it is necessary to carry out a number of preparatory manipulations. Safety in this context comes first, since this is about working with glass and electrical appliances. The first step should always be to completely unplug the device. This will not only protect you from electric shock, but will also allow you to defrost the evaporator if the model is not equipped with a No Frost system.
The second important stage is freeing the internal space from products. Heavy cans and bags significantly weigh down the structure, making the process of removing shelves inconvenient and dangerous. It is also recommended to prepare a soft towel or blanket in advance, which can be placed on the floor under the refrigerator door.
⚠️ Attention: Never try to remove shelves if the refrigerator is full of heavy foods. A sharp jerk can cause the glass surface to fall directly onto your feet or onto the floor, which can lead to injury and broken glass.
Particular attention should be paid to the temperature regime. If you have just defrosted the camera, let the plastic and glass warm up to room temperature. Thermal shock - a phenomenon in which cold glass breaks due to a sudden temperature change when in contact with warm water or hands. Wait 15-20 minutes after defrosting before starting work.
For work you may need the following items:
- 🧤 Durable household gloves to protect your hands from sharp edges.
- 🧼 Warm water and mild detergent for pre-treatment of dirt.
- 🔦 Flashlight for a better view of the fastening mechanisms in the depths of the chamber.
- 📏 Tape measure if you plan to change the height of the shelves.
Design features of shelves in Pozis refrigerators
Refrigerators Pozis are equipped with different types of shelves depending on the series and year of manufacture of the model. Most often, there are designs based on tempered glass, which is highly durable, but requires careful handling during installation. Glass usually has a edging made of plastic or metal, which serves not only as a decorative element, but also as edge protection.
Fixing shelves is carried out in two main ways. The first option is to rely on plastic or metal guides built into the walls of the chamber. The second, more modern option involves the use of special locking mechanisms or latches that prevent the shelf from accidentally falling out when the door is suddenly slammed or shaken during transportation.
The secret of tempered glass
Tempered glass used in refrigerators is 5-7 times stronger than ordinary glass. However, its weak point is the ends and targeted impacts with hard objects. That is why during installation it is important to avoid contact of the glass edges with the metal elements of the case.
It is important to understand that each shelf has its own weight and dimensions. Load capacity a standard shelf in household models usually does not exceed 25-30 kg, but the weight distribution should be uniform. If you plan to store heavy pots or watermelons, make sure that the shelf is installed evenly on all supports.
Let's look at the main types of structures in the table:
| Type of construction | Mounting features | Difficulty of removal | Recommended care |
|---|---|---|---|
| Classic glass | Support on side protrusions | Low | Wash warm water |
| Shelf with side | Fixation in grooves | Medium | Brush cleaning in corners |
| Folding shelf | Hinged mechanism | High | Lubricate the hinges once a year |
| Metal grille | Hooks on the walls | Low | Wipe dry cloth |
Step-by-step instructions: how to remove a glass shelf
The process of removing a glass shelf in refrigerators Position is quite simple if you know the sequence of actions. First, carefully examine the side edges of the shelf. In most models, to remove it, you need to lift the front part of the glass a few millimeters to disengage it from the front stops.
After the front edge is released, do not immediately pull the shelf towards you. First, slide it deeper into the chamber or, conversely, pull it out a little to free the rear supports. Users often make the mistake of trying to pull out the shelf at an angle, which leads to the corners getting stuck in the guides.
☑️ Algorithm for removing the shelf
If the shelf is equipped with additional latches (latches on the sides), they must be pressed or moved to the side simultaneously with the glass lifting. In some models Pozis there are shelves that must first be moved to the side and then removed. Always look for the presence of plastic stops.
⚠️ Attention: It is strictly forbidden to use sharp metal objects (knives, screwdrivers) to pry up shelves. This can lead to chips on the glass, which will subsequently become sources of destruction, or to scratches on the internal plastic coating of the chamber.
After removal, the glass should be washed separately from the refrigerator. Use warm water and a soft sponge. Abrasive powders are strictly prohibited, as they make the glass dull and vulnerable to bacteria. Wipe the shelf thoroughly dry before installing it back.
Removing plastic drawers and containers
The lower part of the refrigerator compartment or freshness zone in models Position is often equipped with drawers made of transparent plastic. These elements also require regular washing, since it is in them that juices from vegetables and fruits most often spill, creating a favorable environment for the growth of bacteria.
To remove the drawer, it is usually enough to pull it out completely until it stops, and then slightly lift the front part. The design of the runners allows the box to easily slide off the guides when lifted. Do not use excessive force: if the drawer does not fit, check whether food or the lids of adjacent containers are in the way.
Some models have removable lids or internal dividers. The cover is removed by moving upwards and towards you. If you notice that the plastic has become brittle or cracks have appeared, it is better to replace the element so that it does not burst under the weight of the products.
- 🥦 Wash the drawers separately, using a brush for hard-to-reach corners.
- 🌡️ Do not use hot water above 40°C to wash plastic to avoid deformation.
- 💨 Dry the drawers thoroughly before installation to avoid the formation of ice.
Removing door shelves and barriers
Refrigerator doors Pozis are equipped with a system of shelves for bottles and small packages. These elements are often made of plastic and are attached to special slides or latches. They must be removed especially carefully, since the plastic on the doors is subject to greater mechanical stress when opening and closing.
To dismantle the door shelf, grab it with both hands from different sides. Pull upward smoothly but firmly. In most cases the shelf should come out of the grooves. If you feel strong resistance, try slightly rocking the shelf from side to side to release the latches.
Bottle balconies require special attention. They are often complex in shape and may be secured with additional screws in some older models. Modern versions use a system Click-Clackthat allows you to change the door configuration in seconds.
After removal, be sure to wipe the attachment point on the door itself. Condensation and sticky residue often accumulate there, which can make it difficult to install the shelf back. Make sure that the guides on the door are intact and do not have cracks.
Complicated cases: when the shelf cannot be removed
Sometimes owners are faced with a situation where the shelf is tightly stuck. This can happen due to freezing, a foreign object getting into the fastening mechanism, or the plastic deforming over time. If freezing occurs, allow the refrigerator to defrost completely. Using a hairdryer or hot water to speed up the process can lead to cracks.
If the shelf is jammed due to misalignment, try gently rocking it in a horizontal plane. Sometimes it is enough to move it a millimeter to the side to free the jammed corner. The main rule is not to use force. Plastic becomes brittle at low temperatures, and a sudden movement can break the fasteners.
In rare cases, the cause of jamming is a manufacturing defect or a violation of the geometry of the camera after transportation. If you are sure that you are doing everything correctly, but the shelf does not budge, it is better to contact a service center. Solving the problem yourself by force can lead to damage to the internal circuit of the refrigerator.
⚠️ Attention: If you feel that the shelf is supported by ice, under no circumstances use a knife or other sharp objects to chip the ice around the fasteners. You can break the evaporator, and then the repair will cost much more than a new shelf.
Care of internal elements and prevention
Regular care of shelves and drawers is the key to a long service life of the refrigerator Posis. In addition to regular washing with water, it is recommended to carry out disinfection every six months. To do this, you can use special household appliance products or a weak solution of vinegar.
Pay attention to the condition of the rubber seals, which may be located under the shelves or in the grooves. They also need to be wiped and lubricated with silicone to maintain elasticity. Cleanliness inside the chamber affects not only the appearance, but also the efficiency of the compressor and the safety of products.
When assembling the refrigerator after washing, make sure that all elements are in place with a characteristic click or stop. A loose shelf may cause noise or vibration when the compressor operates. Check the horizontal installation by placing a glass of water on the shelf.
Frequently asked questions (FAQ)
Can Pozis glass shelves be washed in the dishwasher?
The manufacturer usually does not recommend washing glass shelves in the dishwasher at high temperatures. Aggressive detergents and strong heat can damage the protective coating of the glass or cause it to become cloudy. It is better to wash it by hand with warm water.
What to do if the glass shelf is cracked?
Operating a refrigerator with a cracked shelf is dangerous. The shards can get into the food, and the stress can permanently break the glass. It is necessary to order an original spare part for the refrigerator model. The use of temporary plywood solutions is unacceptable for hygiene reasons.
How often should you remove and wash the shelves?
It is recommended to completely disassemble and wash the internal elements of the refrigerator every 3-4 months. If there is a spill of liquid products, cleaning must be done immediately to avoid the absorption of odors by the plastic.
Why does the shelf fall out by itself?
This may be due to wear of the plastic clips, broken guides, or improper installation. Check if the refrigerator is level on the floor. If the problem is broken fasteners, they can be replaced by ordering new ones from the service center.
Where can I find video instructions for my model?
Video instructions are often available on the official channel of the brand or on the websites of service centers. Enter into the search the exact model of your refrigerator Pozisindicated on the nameplate inside the chamber to find the most relevant video.