How to properly and safely remove the shelves from the Pozis refrigerator

Regular cleaning of refrigeration equipment is the key not only to cleanliness, but also to the correct operation of the unit. Owners of Russian brand appliances often wonder how to remove shelves from a Pozis refrigerator without damaging the fragile glass or plastic guides. The design of these models has its own characteristics, and the use of brute force here is strictly unacceptable. Incorrect actions can lead to breakage of the latches or destruction of tempered glass, the replacement of which will be expensive.

In this article we will analyze in detail the algorithm for dismantling all removable elements of the internal space, including glass shelves, plastic containers and door baskets. You'll learn where the latches are located, what to do if the shelf gets stuck, and what precautions you need to take. By following the instructions, you will be able to carry out high-quality general cleaning or safely transport equipment when moving.

Before starting any manipulations with the internal contents of the refrigerator, it is necessary to prepare the work space. Clear the chamber of food, especially glass jars and heavy bottles that may fall during removal. It is also recommended to prepare a soft towel or blanket in advance on which you will place the removed elements to avoid scratches and chips.

Preparatory stage and safety precautions

Before you begin removing elements, it is important to ensure safe working conditions. The refrigerator Pozis can be filled with heavy food, so the first step is to completely empty the compartment. Do not attempt to remove shelves that are loaded with weight, as this increases the risk of glass falling and injury. It is better to spend time unloading the contents than to later collect fragments and spilled food.

Pay attention to the temperature conditions. If you plan to wash your shelves with hot water, let them warm up to room temperature first. A sudden change in temperature can cause thermal shock, and the glass will burst. Tempered glassused in refrigerators, durable, but sensitive to local shocks and sudden heating or cooling.

⚠️ Attention: Never use sharp metal objects (knives, screwdrivers) to pry up shelves or latches. The plastic from which the guides are made may crack, and permanent scratches will remain on the glass.

For comfortable work, ensure good lighting inside the camera. In some models Pozis with a system No Frost or Frost Free the view may be limited by plastic panels or air ducts. If the refrigerator has a quick freezing or super-cooling function, turn it off before starting work to avoid icing of the mechanisms during long-term cleaning.

Removing the glass shelves of the main chamber

Glass shelves in Pozis refrigerators are usually held in place by a system of grooves and plastic limiters. In most models, they do not have rigid latches, but are fixed due to their weight and precise fit into the seats. To remove such a shelf, you need to grab it by the front edge on both sides. Lift the front up a few millimeters to disengage from the front stops.

Once the front edge is lifted, gently pull the shelf towards you. The movement should be smooth, without jerking. If the shelf does not move, check to see if it is resting against the side walls or rails. In some modifications, there may be small protrusions on the side edges of the glass that need to be correctly oriented relative to the grooves on the walls of the chamber.

• 🧊 Take the shelf with both hands symmetrically from the sides to distribute the load evenly.
• 🧊 Raise the front edge by about 2-3 cm, overcoming the resistance of the front stops.
• 🧊 Smoothly push the shelf forward, making sure that the back corners do not touch the walls of the refrigerator.
• 🧊 If the shelf is equipped with a decorative edging, make sure that it does not cling to the internal elements of the chamber.

Particular attention should be paid to models with pull-out shelves. In such designs, the glass is installed on plastic runners. To remove them, you must first pull out the shelf completely until it stops. Then lift the front edge and pull the element up and towards you. The runner mechanism may have stoppers that are unlocked only at a certain angle of inclination.

When putting the shelf back, make sure that it lies flat on all supports. Incorrect installation can lead to misalignment and subsequent falling of the glass when loading with products. The sound of a slight click or a characteristic tight fit will indicate that the element is in place.

Removing plastic boxes and containers

The lower part of the refrigerator and freezer compartment (if it is a combined model) is usually equipped with plastic drawers. In refrigerators Pozis they are often made of transparent or translucent plastic and installed on special guides. The design may differ depending on the series: “Rowan”, “Mir”, “Atlant” (produced for Pozis) or more modern lines.

The standard algorithm for removing the drawer involves its full extension. When the box reaches its extreme position, it needs to be lifted up slightly. This action is necessary to disengage the wheels or runners of the drawer from engaging the rails on the walls of the refrigerator. After this, the container is freely removed by moving towards you.

It is important to consider the condition of the plastic. Over time, the material may become more fragile, especially if the refrigerator was operated at constant low temperatures or was exposed to direct sunlight. Plastic guides require careful handling. If you feel strong resistance, stop and inspect the mechanism. There may be a piece of food or ice stuck inside that is preventing movement.

⚠️ Attention: If the drawer is frozen to the bottom or guides due to ice formed, do not try to pull it out by force. Turn on the defrost mode or leave the refrigerator turned off for a while until the ice melts.

Removing elements from the refrigerator door

Door shelves in Pozis refrigerators are attached differently depending on the model. Classic versions use removable plastic stops that are inserted into holes on the inner wall of the door. More modern models use solid balconies with a click-clack fixation system or special latches.

To remove a regular shelf-limiter, you need to take it by one of the edges and pull it up and at the same time towards you. It is usually enough to apply moderate force to force the plastic pin out of the hole. If the shelf is long and is held on both sides, you need to release one side first, then the other.

In models with a system Door Cooling or reinforced balconies for bottles, the mechanism may be more complicated. Fixation in the form of a tongue is often found here. Click on it or pull the special tab to unlock the structure. Be careful: door shelves are often made of thinner plastic than the internal elements and can easily break if handled carelessly.

• 🚪 Remove the shelves one at a time, starting with the top one, to ensure better visibility and access.
• 🚪 If the shelf is composite (base and stopper), first remove the stopper, then base.
• 🚪 When installing it back, make sure that the shelf fits into the grooves until there is a characteristic click.
• 🚪 Check the integrity of the mounting holes on the door before installing new elements.

Cleaning door shelves requires special attention, since this is where most often Sticky traces of food and condensation accumulate. Before reinstalling, thoroughly wipe and dry the plastic parts. Moisture between the shelf and the door wall can cause mold or an unpleasant odor to form.

What to do if the shelf fastener on the door breaks?

If a plastic pin or eye breaks off, do not try to glue it with superglue - the glue does not hold in cold and humid conditions. It is better to order a new shelf using the catalog number of the model or use universal removable holders, which are sold in hardware stores.

Nuances of disassembling the freezer

The freezer compartment of refrigerators Pozis is often equipped with additional functional elements, such as ice trays, compartments for quick freezing and metal or plastic partitions. Removing these elements requires understanding the design of a particular series.

If a metal grill is installed in the freezer, it is usually simply inserted into the grooves. To remove it, you need to lift one edge, disengage it and remove it diagonally (obliquely) if the back wall is in the way. Plastic ice trays can be snapped onto the chamber ceiling or walls. Press the latch and pull the tray down.

In models with the system No Frost there may be fewer removable elements in the freezer compartment, since the space is optimized for air circulation. It is important here not to damage the evaporator, which is often covered with a plastic panel. Removing this panel unless necessary (for example, for regular washing) is not recommended, as this may compromise the seal of the system or damage fragile tubes.

Be sure to check for ice under the bottom drawer of the freezer. Users often forget that water can accumulate under a plastic container, which freezes and blocks movement. In such cases, it is necessary to completely defrost the unit before attempting to remove the elements.

⚠️ Attention: Do not use a hair dryer or other heating devices to speed up the thawing of ice in the freezer. This can lead to deformation of the plastic and damage to the internal coating of the chamber.

Care for removed elements and assembly

After you have managed to remove all the shelves and drawers, the maintenance stage begins. Glass shelves can be washed with warm water and mild detergents. Avoid abrasive sponges, which can leave micro-scratches that reduce the clarity and strength of the glass. It is better to wipe plastic elements with a soft cloth soaked in soapy water.

Dry all elements thoroughly before assembly. Residual moisture in the grooves and on the guides can cause the shelves to freeze the next time you turn on the refrigerator. Reassemble in the reverse order of disassembly. Install the bottom drawers first, then the middle shelves, and finally the tops and door baskets.

When installing glass shelves, make sure they lie level. Use a building level or simply visually assess the position by placing a small object on the shelf. Misalignment may cause the refrigerator door to not close tightly, which will lead to increased energy consumption and the formation of ice.

• 💧 Use warm water (not higher than 40°C) for washing to avoid thermal shock.
• 💧 For disinfection, you can use a solution of soda or citric acid.
• 💧 Wipe all surfaces dry with a soft absorbent cloth.
• 💧 Check the cleanliness of the guides in the refrigerator itself before installing the shelves.

Regular maintenance and proper operation will extend the life of the refrigerator. Pozis. Clean shelves and drawers provide better air circulation, which is especially important for models with automatic defrost. In addition, in a clean refrigerator, food stays fresh longer and does not absorb foreign odors.

Frequently asked questions (FAQ)

Can Pozis glass shelves be washed in the dishwasher?

The manufacturer usually does not recommend washing shelves in the dishwasher. High water temperatures and aggressive detergents can damage the protective coating or cause the glass to become cloudy. In addition, vibration during the wash cycle can cause chipping. It is better to wash them by hand.

What to do if the plastic shelf stop is broken?

If a plastic pin or eye is broken, you cannot use the shelf in this place - it may fall. You must order an original spare part according to the catalog number of your refrigerator model. A temporary solution (for example, lining a wooden block) is not safe or reliable.

How often should you carry out general cleaning with dismantling the shelves?

It is recommended to completely defrost and wash the refrigerator, removing all shelves and drawers at least once every 3-4 months. If contamination occurs in the chamber (milk has been spilled, food has spilled), cleaning must be done immediately, without waiting for the scheduled date.

Why does the shelf get stuck when you try to remove it?

Most often the reason is frozen moisture or sticky food residues that act like glue. It is also possible that the shelf is skewed and rests at an angle against the wall. In rare cases, the plastic itself may become deformed due to load or time. Check for ice and dirt in the grooves.

Is it possible to use a refrigerator without installed shelves during washing?

Short-term operation of a refrigerator without shelves is acceptable, for example, while drying chambers. However, long-term use without internal elements is not recommended, as this disrupts the circulation of air flow, which is especially critical for the No Frost system. This can lead to incorrect temperature conditions and increased load on the compressor.