Modern refrigerators Pozis are famous for their reliability and capacity, but even the highest quality equipment requires regular maintenance. Sooner or later, every owner faces the need for general cleaning, during which the question arises: how to carefully remove the internal elements in order to wash them? Unlike many Western analogues, domestic models have their own design features, which are important to consider in order to avoid breakage of fragile parts.
An incorrect approach to dismantling can lead to cracks in the glass or damage to plastic stops, which will make further operation inconvenient. In this article we will analyze in detail the algorithm of actions for various types of shelves found in refrigerators of the brand Pozis. You'll learn where the hidden latches are and how to safely overcome the resistance of the rubber seals.
Many users make the mistake of trying to apply force where all that is needed is the correct sequence of movements. Refrigeration chamber design designed to provide a tight seal so the elements can fit quite tightly. Understanding how the latches work will help you save time and nerves during cleaning.
Preparation for dismantling: important safety nuances
Before you begin removing the shelves, you need to prepare the workspace. Make sure there is enough space in the area in front of the refrigerator to accommodate the removed items. Shelves made of tempered glass, despite their strength, do not tolerate sudden changes in temperature and impacts on hard surfaces.
Free the shelf from food and dishes. If you plan to wash it with hot water, allow the glass to warm up to room temperature first to avoid thermal shock. Tempered glass may burst if exposed to sudden contact with boiling water immediately after being frozen.
⚠️ Warning: Never try to remove the shelf, if there are heavy glass jars on it. This creates an uneven load on the guides and can lead to their breakage at the most inopportune moment.
☑️ Preparing to remove the shelf
It is also worth paying attention to the condition of the rubber seals, if they are present in the structure. Over time, the rubber may dry out or become deformed, which will require more careful handling. If you have not carried out deep cleaning for a long time, you may need to put in a little more effort to loosen stagnant parts.
Removing glass shelves on metal guides
In most refrigerator models Pozis, such as series RF or RN, the main shelves are made of thick tempered glass and rest on metal or plastic rails. These designs are considered the most reliable, but have their own removal features. The main principle here is the absence of rigid fixation with screws; they are held in place by weight and limiters.
To remove such a shelf, you need to slightly lift its front edge. Typically the elevation angle is about 10-15 degrees. After this, the shelf is pulled towards itself. If you feel resistance, do not use brute force—adhered ice or dirt in the grooves may be interfering.
What to do if the shelf is stuck?
If the shelf cannot be removed, check the side walls of the chamber. Sometimes when the case is skewed or the plastic expands from the cold, the gaps narrow. Try to slightly rock the shelf from side to side to find free movement.
After removal, inspect the ends of the glass for chips that could have formed during operation.
Removing lattice shelves and limiters
In some budget or older models Pozis they may There are shelves in the form of a metal lattice with a plastic frame. Their design often includes additional plastic stops on the front to prevent food from falling out. You need to remove such elements, starting from the front side.
Plastic stops are usually secured with latches on the sides. Press the locking tabs and pull the frame up. The metal mesh is then simply removed from the grooves. It is important here not to confuse the top and bottom when reinstalling, since the bottom profile may be asymmetrical.
- 🔍 Inspect the plastic fasteners for cracks before removing.
- 🧼 It is convenient to wash the metal mesh in a shower stall or bathtub under strong pressure.
- 📏 Remember the location of the shelves, as the distance between them may differ.
Often users wonder whether it is possible to operate the refrigerator without installed limiters. Technically this is possible, but plastic frames they perform an important safety function, preventing bottles and cans from falling when the door is opened.
Design features of models with the No Frost system
Refrigerators Pozis s systems No Frost have a more complex internal architecture. Here the shelves are often integrated into the overall air circulation system. In such models, it is important not to damage the cold supply channels located on the rear wall.
Removing shelves in No Frost usually occurs according to the classic scheme: lift and pull out. However, it is worth paying attention to the back of the shelf. Sometimes there may be additional stops that need to be bypassed. If the shelf sits very tightly, it may be frozen to the wall due to a broken door seal.
⚠️ Attention: In refrigerators with the No Frost system, you should absolutely not use a knife or other sharp objects to break off the ice around the shelves. This may damage the evaporator hidden behind the plastic panel.
If you find that the shelf is frozen, let the refrigerator defrost naturally for several hours. Forced tearing will lead to chips on the glass or deformation of the plastic.
Compatibility table and types of fastenings
To better navigate the variety of designs, we suggest that you familiarize yourself with the table describing the main types of fastenings found in technology Pozis. This will help you identify your model and choose the correct dismantling method.
| Shelf type | Material | Mounting type | Difficulty of removal |
|---|---|---|---|
| Standard | Tempered glass | Guides in the walls | Low |
| Budget | Metal mesh | Plastic grooves | Medium |
| Reinforced | Glass + Plastic | Latch latches | High |
| Special | Plastic | Plug-in (for vegetables) | Low |
As can be seen from the table, the complexity of the procedure directly depends on the type of structure. Reinforced shelves with additional clamps require careful study of the latch mechanism before starting work.
Cleaning and maintaining removed elements
After you have managed to safely remove the shelf, the stage of cleaning it begins. Window cleaners or a baking soda solution are ideal for cleaning glass surfaces. These substances effectively remove grease and odors without leaving streaks.
It is better to wipe plastic elements and rubber seals with a soft sponge and a neutral detergent. Aggressive chemistrycontaining chlorine or abrasive particles can make the plastic cloudy or damage the structure of the rubber, which will lead to cracking.
Dry all parts thoroughly before putting them back in the refrigerator. Residual moisture can cause ice to form or mold to develop in hard-to-reach areas of the camera. Pay special attention to corners and joints if the shelf is composite.
While the shelves are drying, it is recommended to wipe the inner walls of the refrigerator compartment. This is a great time to check the condition cooling systems and make sure that nothing is interfering with normal air circulation.
Common mistakes when putting shelves back
Returning elements to their places is a process that seems simple, but there are also some nuances here. Often users try to fit a shelf in the first time without checking the correct orientation. This may lead to jamming of the mechanism or damage to the walls.
Make sure that the shelf is inserted all the way. A characteristic click or tight fit indicates correct installation. If the shelf wobbles or protrudes beyond the dimensions of the chamber, it means that it is inserted incorrectly.
- ❌ Do not install a warm or damp shelf in a working refrigerator.
- ❌ Do not ignore the “Front” markings or arrows on plastic parts.
- ❌ Do not leave the shelf is empty if it is designed to hold heavy products (strength test).
By following these simple rules, you will extend the life of the internal elements of your Pozis. Proper care of the refrigerator is the key to its long and trouble-free operation, as well as the safety of your products.
Is it possible to wash the shelves in the dishwasher car?
Most glass refrigerator shelves Pozis are made of tempered glass, which theoretically can withstand high temperatures. However, plastic stops and rubber seals can become deformed when exposed to hot steam and aggressive detergents in the dishwasher. It is recommended to wash them by hand.
What to do if the shelf is cracked?
If even a microscopic crack appears on the glass, such a shelf cannot be used. Under the weight of the food, it can burst at any moment. You need to order an original spare part from the manufacturer or find a compatible analogue by measuring the dimensions of the old shelf.
How often do you need to remove and wash the shelves?
The optimal frequency for general cleaning of the refrigerator with complete dismantling of the shelves is once every 3-4 months. This helps prevent the appearance of persistent odors and the growth of bacteria. If food spills, clean up should be done immediately.