The choice of refrigeration equipment for the kitchen is always a balance between the desired volume of chambers and the physical capabilities of the room. When it comes to Belarusian technology, the question what is the height of the Atlant two-chamber refrigerator becomes one of the most frequently asked questions, since dimensions directly affect the ergonomics and capacity of the unit. Modern models differ significantly from their Soviet counterparts, offering a wide range of sizes for any kitchen set.
Plant engineers Atlant have developed several standard sizes that allow the equipment to fit into most standard layouts. However, there are many nuances, from the location of the compressor to the height of the adjustable feet, that can change the final centimeters. In this article, we will analyze in detail all aspects of vertical dimensions so that you can avoid errors during delivery and installation.
Standard dimensions and classification of series
The range of two-chamber models of the brand is divided into several main series, each of which has its own characteristic design features. Refrigerator height directly depends on the series to which it belongs belongs, and can vary in the range from 145 to 205 centimeters. Understanding the classification will help you quickly navigate the catalog and choose a device for a specific niche.
The most common models are the 40, 42 and 45 series. They are a classic two-chamber design with a bottom freezer. Height of such units most often it is exactly 185 cm or 195 cm, which is considered the gold standard for modern kitchens. These sizes allow you to place tall pots and bottles on the shelves, while maintaining ease of access to products.
There are also more compact options, often classified as the 28 series or specialized lines. Their height usually does not exceed 150 cm, which makes them ideal for installation under a countertop or in kitchen niches. In such models, the volume of the freezer compartment can be reduced in order to maintain proportions and energy efficiency.
It is especially worth mentioning models with a top-mounted freezer, although there are fewer and fewer of them in production. Dimensions such devices often correspond to a height of 160-170 cm, which is convenient for short people or elderly users who find it difficult to bend down to the bottom camera.
The influence of the compressor model on the overall dimensions
One of the hidden factors influencing the final height is the type of compressor used. Depending on the series, one or two compressor motors may be located on the rear wall, which creates a difference in depth and, indirectly, affects the requirements for ventilation gaps on top.
Models with one compressor, as a rule, have a thinner body and a standard height of about 185 cm. Double-compressor versions, which provide independent temperature control in the chambers, can be a little more massive. It is important to consider that technical clearance the top is necessary specifically to remove heat from this unit.
⚠️ Attention: When measuring the height of a niche, be sure to take into account that the compressor can protrude beyond the dimensions of the housing by 3-5 cm. This does not increase the overall height, but requires free space at the back and above for circulation air.
Some modern series are equipped with inverter compressors, which are more compact than traditional ones. This allows manufacturers to increase the useful internal volume, while keeping the external dimensions of the Atlant refrigerator within the standard 185-195 cm. When choosing, pay attention to the passport data of a specific model, since even within the same series there may be modifications.
If you plan to build the equipment into a cabinet, the type of compressor becomes critically important. Built-in models often have a modified ventilation system, and their height can be strictly fixed by furniture fittings standards, differing from free-standing analogues.
Adjustable supports and their effect on height
Many buyers forget that the height stated in the catalog is not an absolute value. There are always adjustable supports at the bottom of the body, which allow you to level the equipment on an uneven floor. The adjustment stroke is usually from 1 to 2.5 cm, which can be a decisive factor when installing in a low niche.
When ordering a kitchen or preparing a place, it is important to take into account the maximum reach of the legs. If you fit the refrigerator end-to-end into a niche 185 cm high, and then you have to unscrew the supports for alignment, the device may simply not fit into place. Height adjustment - this is not just convenience, it is a necessity for the proper operation of the door mechanisms.
- 🔧 Standard adjustment stroke the front supports are about 20 mm.
- 📏 The rear supports are often fixed or have a minimum stroke, check the instructions for the specific model.
- ⚖️ Incorrect tilt setting can lead to the doors not closing themselves.
For accurate positioning, it is recommended to use a building level. The tilt of the body back (approximately 2 degrees) ensures that the doors close naturally under the influence of gravity. If Atlant refrigerator stands strictly vertically or tilted forward, the door may remain ajar, which will lead to defrosting of food.
Comparative table of dimensions of popular series
To to systematize the information and answer the question what is the height of the Atlant two-chamber refrigerator in numbers, we present data on the main series. These values are averaged for standard modifications, but may differ slightly depending on the year of manufacture and the specific configuration.
| Series / Model | Type of freezer placement | Height (cm) | Width (cm) | Depth (cm) |
|---|---|---|---|---|
| Atlant 40 (450, 420) | Lower | 185 | 60 | 63 |
| Atlant 42 (450, 420) | Nizhne | 195 | 60 | 63 |
| Atlant 28 (2835) | Nizhne (compact) | 145-150 | 55-60 | 60 |
| Atlant 60 (6025) | Lower | 205 | 60 | 66 |
| Atlant 17 (1700) | Upper | 160-170 | 60 | 60 |
The table shows that the spread of heights is significant. Models of the 60 series, reaching 205 cm, belong to the XL category and require high ceilings or special niches. The standard 185 cm (series 40) remains the most popular choice due to the optimal ratio of volume and occupied space.
When choosing, pay attention not only to the height of the body itself, but also to the depth, taking into account the protruding handles and rear grille. Sometimes it is the depth, and not the height, that becomes the limiting factor when installing in a deep pencil case.
Nuances of installation in a kitchen set
Integrating a free-standing refrigerator into a niche requires a special approach. Although there are special built-in models, many try to install a regular one in a prepared cabinet. In this case, the height of the niche should be strictly greater than the height of the unit, taking into account the unscrewed supports. two-chamber Atlant in a prepared closet. In this case, the height of the niche must be strictly greater than the height of the unit, taking into account the unscrewed supports.
The top cover of the cabinet should not put pressure on the body of the refrigerator. This can cause vibration, additional noise and even damage to the internal tubes of the cooling system. Gap at the top It is also necessary for heat exchange, especially if the compressor is located in the upper part (although in Atlanteans it is often below, but the heat rises upward).
If the height of your kitchen is standard (210-220 cm from the floor to ceiling), then a model with a height of 195-205 cm will fit perfectly, leaving space for a decorative base or ventilation grille. Kitchens with a ceiling height of 240 cm or more may require additional extensions or select the 60 series models.
⚠️ Attention: Never glue or screw the refrigerator tightly to the cabinet walls. Vibration during compressor operation should be dampened by free movement, and access to the rear wall for maintenance should remain possible.
When installing in a corner of the kitchen, consider the door opening radius. If the refrigerator is in a niche, the height of the handles and their shape may prevent the door from opening 90 degrees if the side walls of the niche are too close. In such cases, sometimes it is necessary to reduce the height of the shelves inside so that they do not interfere with rotation.
☑️ Checking the niche before installation
Technical features and internal space
External height does not always correlate with useful volume. Thanks to modern insulation technologies and thin walls, Atlant refrigerators they can have impressive internal space with standard dimensions. However, the location of the evaporator and the No Frost system (if there is one) can “eat up” several centimeters of useful height inside the chambers.
In models with the system No Frost the fan and air exhaust channels are located on the rear wall inside the chamber. This may slightly reduce the depth of the shelves, but does not affect the overall height of the device. In a drip system ("crying wall"), the internal space is often used more efficiently.
The height of the freezer also depends on the overall height of the refrigerator. In 185 cm models, the freezer usually has 3 drawers, and in 195-205 cm models there are 4 drawers or an enlarged top drawer. This is an important parameter for those who store large frozen products, for example, whole poultry carcasses or pizza in boxes.
- ❄️ The useful height of the freezer compartment in 185 cm models is about 45-50 cm.
- 🍖 In tall models (195+ cm), the freezing depth increases to 60-65 cm.
- 🥛 The height of the shelves in the refrigerator compartment is often adjustable, which allows you to place tall bottles.
When planning food purchases, it is important to consider not only the overall height, but also the height between the shelves. In some models of the 450 series, despite the standard 185 cm, the internal layout allows you to place 5-6 adjustable shelves, which increases the functionality of the device.
Why may the actual height differ from the declared one?
Manufacturers indicate dimensions without taking into account protruding parts, such as door hinges or decorative trims. The actual height with the door open or with the handles pulled out may be 1-2 cm higher. Always measure the niche with a margin.
Frequently asked questions (FAQ)
Is it possible to reduce the height of the Atlant refrigerator by removing the top cover?
It is strictly not recommended. The top of the enclosure often houses important electrical wiring, and the cover itself provides structural rigidity. Removing it may break the tightness of the insulation layer and lead to failure. In addition, this will void the warranty.
What height of the Atlant refrigerator is considered standard for Khrushchev?
For small-sized kitchens, the optimal height is up to 160 cm (series with a top freezer or compact two-chamber). However, many successfully install standard 185 cm models if the width of the passage and the absence of upper cabinets above the installation site allow.
Does height affect energy consumption?
Height does not have a direct effect. Consumption depends on the volume of the chambers, the energy efficiency class of the compressor and the quality of insulation. However, a taller refrigerator (205 cm) has a larger volume that needs to be cooled, which could theoretically increase energy consumption compared to a compact 145 cm model with the same load.
How to accurately measure the height of a recess to be built in?
Use a laser level or a long ruler. Measure the height in the left and right corners, as well as in the center, as the floor may be blocked. Take the minimum value as a basis and subtract another 2-3 cm from it for the ventilation gap and error.