What is the height of a refrigerator Atlant: standards and series sizes

When selecting new kitchen appliances, one of the primary parameters that determine the possibility of installing the unit in an existing niche or under a countertop is its dimensions. The question of how tall the Atlant refrigerator is arises for most buyers who are planning to replace old equipment or install a new kitchen from scratch. The Belarusian manufacturer produces a wide range of models, and their sizes can vary significantly depending on the series, type of compressor and number of chambers.

The standard height of refrigerators of this brand is most often tied to generally accepted furniture standards, however, there are also non-standard solutions that require special attention when designing a kitchen unit. Understanding the exact dimensions is necessary not only to ensure that the equipment physically fits into the designated place, but also to ensure proper air circulation, which is critical for the durability of compressor and the system cooling.

In this material we will analyze in detail what high-altitude standards apply Atlant plant for various product lines. You will learn about the difference between classic models, low options for embedding and high two-chamber units, and also receive practical recommendations for measurements.

Standard dimensions and classification of models

Most refrigerators on the market are divided into several main groups by height, and the products of the Minsk plant are no exception. The most common categories are models with heights of 150 cm, 170 cm and 200 cm. These numbers are not accidental: they correspond to the standard sizes of kitchen countertops and wall cabinets. For example, a height of 150 cm is ideal for installation under a kitchen work surface, creating a single line of the facade.

Larger two-chamber models are characterized by a height in the range from 170 to 205 cm. Such units are often called “European standard”, and they are intended for installation as a free-standing unit or in a niche specially prepared for high-tech equipment. It is important to consider that the actual height may differ slightly from that stated in the passport due to the adjusting supports, which allow you to level the device on an uneven floor.

There are also compact models whose height does not exceed 85-100 cm. They are often used in offices, hotel rooms or small studio apartments. In such devices, there may be no freezer at all or it may be made in the form of a small compartment inside the main refrigerator compartment.

⚠️ Attention: When ordering a kitchen set, always leave a technological gap at the top. Even if the nominal height of the refrigerator is 150 cm, the actual height, taking into account the wheels and play, may be 2-3 cm more, which will prevent it from being rolled under the countertop.

Knowledge of the exact classification allows you to quickly navigate through catalogs and weed out unsuitable options. If you are planning a purchase, be sure to check with the seller whether the height is indicated with or without transport wheels, since this detail can play a decisive role.

Height of Atlant two-chamber refrigerators

Two-chamber refrigerators are the most popular in the manufacturer’s line, and their dimensions are strictly standardized. The main volume of the market is occupied by models with a height of 170 cm and 200 cm. Models with a height of 170 cm (more precisely, 173-175 cm taking into account handles and supports) are considered the “golden mean”, providing sufficient usable volume with comfortable access to the upper shelves without a stepladder.

Tall models, reaching 200-205 cm, offer the maximum amount of internal space. These refrigerators often use technology No Frost or an advanced drip defrost system, which requires additional equipment to be placed at the top of the cabinet, increasing the overall height. When choosing such a model, it is important to consider not only the height of the ceiling, but also the possibility of the device being carried through doorways, which may be below 2 meters.

Some series of two-chamber refrigerators have intermediate heights, for example, 185 cm or 190 cm. Such sizes are often found in series with increased width or depth, where the proportions of the body are changed to increase the capacity of the freezer. For these models, it is critical to check the drawings in the technical documentation, since standard niches of 170 or 200 cm may not be suitable.

• 📏 150 cm is the classic height for embedding under the countertop, the freezer is usually on top.
• 📏 170-175 cm is the most popular segment, the optimal ratio of height and volume.
• 📏 200-205 cm —tall models with plenty of space, often with the No Frost system.
• 📏 140-145 cm —rare two-chamber models, often with a small-volume bottom freezer.

When planning the placement of a two-chamber unit, it is worth remembering the need to open the doors. If the refrigerator is tall, the radius of opening the door increases, and it can touch adjacent furniture or wall projections if sufficient indentation is not left.

Features of built-in models and their sizes

Built-in appliances require special accuracy in size, since they are hidden by the facades of the kitchen unit. The height of Atlant built-in refrigerators usually strictly corresponds to the height of standard kitchen modules. The most common models are 139-140 cm, 177-178 cm and 214-215 cm in height. These figures correspond to standard cabinet heights: 60 cm (for low), 140 cm (under the countertop), 180 cm and 220 cm (full height).

The main feature of built-in models is that their height is indicated without taking into account kitchen plinth and decorative trim. However, during installation, it is necessary to take into account the height of the legs of the kitchen cabinet in which the unit will be placed. Often, to compensate for the height, adjustable supports of the refrigerator itself are used, which allow you to “grow” or “lower” the device by a few centimeters.

An important nuance is the ventilation system. Built-in refrigerators have a different heat exchanger design and require an air channel (duct) inside a furniture niche. If the height of the niche is less than the required one, air circulation will be disrupted, which will lead to overheating condenser and increased energy consumption.

Some models of built-in refrigerators have a removable upper decorative box that can be dismantled if the niche has a non-standard, slightly smaller height. This allows you to fit the equipment into the space with a tolerance of 1-2 cm.

Comparative table of sizes by series

For ease of choice, we suggest that you familiarize yourself with the summary table, which shows the typical heights of various series of Atlant refrigerators. Please note that the data may vary slightly depending on the specific modification and year of manufacture.

The table shows that the height range big enough. When choosing a model from the series XM-46xx you get almost two meters of usable space, while the series XM-40xx will save vertical space. Always check the exact dimensions of the selected model on the official website or in the instructions, as the factory may make changes to the design of the case.

⚠️ Attention: The height indicated in the table is nominal. Actual dimensions may vary by ±1-2 cm due to adjustment screws and assembly features. When designing a niche, always add a margin.

The influence of height on energy consumption and functionality

The height of the refrigerator directly correlates with its internal volume and, as a result, with the power of the installed compressor. Tall models (200+ cm) are often equipped with two compressors or more powerful single-compressor systems to ensure uniform cooling of a large volume of chambers. This can affect the final energy consumption, although modern energy efficiency classes A+ i A++ minimize this difference.

Height also affects the ergonomics of use. In tall refrigerators, the top shelves may not be easily accessible for short people. Manufacturers solve this problem by making the upper compartments less functional (for example, placing only dry supplies there) or by using drawers on telescopic slides.

In addition, in high models there is more often a “freshness” zone or a zero chamber, which require additional space for installing a separate heat exchanger or damper system. This makes tall refrigerators more functional, but also more difficult to maintain.

Practical advice on measurements and installation

Before purchasing an Atlant refrigerator, it is critically important to correctly measure the space allocated for it. You need to measure not only the height, but also the width and depth, taking into account baseboards, wall projections and door frames. The height is measured from the floor to the bottom edge of the wall cabinet or ceiling ledge.

When measuring the height, be sure to use a building level to ensure that the floor in the installation location is level. If the floor is sloped, the actual height of the required opening may increase. Also remember about the ventilation gap: there should be at least 5-10 cm of free space above the refrigerator for warm air to escape, even if visually it seems that the equipment is standing end-to-end.

Don't forget to check the dimensions of the doorways in the apartment. The standard door height is 200 cm (2 meters). If you buy a refrigerator with a height of 205 cm, you may have to bring it in disassembled (remove the refrigerator doors) or through a balcony/window, which carries risks of damage.

• 🔨 Dismantling the doors: For most Atlant models, you can remove the doors, which reduces the height during transportation by 30-40 cm.
• 🔨 Adjusting the legs: Check the movement of the adjusting screws in advance to see if it will be possible to level the device in place.
• 🔨 Opening angle: Make sure that the high door will not block the passage or adjacent cabinets when opened 90 degrees.

Following these simple rules will help avoid situations when the purchased refrigerator is 1 cm above the opening or does not fit through the door, which is especially important for models of maximum height.

Frequently asked questions (FAQ)