How to properly turn on freezing in a two-chamber Atlant refrigerator: step-by-step instructions with photos

Two-chamber refrigerators Atlant are well-deservedly popular due to their reliability and simple controls. However, even experienced users sometimes have questions about how to correctly activate the mode superfreezes or set up the freezer for efficient food storage. In this article we will analyze all the ways to enable freezing - from basic to hidden functions that are not written about in the standard instructions.

It is important to understand that models Atlant are produced with different control systems: mechanical (wheel controls), electronic (buttons + display) and sensory (in premium series). The algorithm for turning on freezing will differ depending on the type of panel. We will describe each option in detail, and also tell you how to avoid typical mistakes that lead to freezing of products or increased energy consumption.

If your refrigerator Atlant suddenly stops freezing or, conversely, works without stopping - at the end of the article you will find a checklist for diagnosing malfunctions. And for those who plan long-term storage of large volumes of food, we have prepared a table of optimal temperature conditions for different types of food.

1. Types of control systems in refrigerators Atlant: how to determine yours

Before turning on freezing, you need to understand what kind of control system is installed in your model. This is critical, since the configuration algorithms are radically different. Here are the key features:

• 🔄 Mechanical panel: controls in the form of wheels or sliders located inside the refrigerator compartment (usually on the top panel) or on the outer wall. Marking: numbers from 1 to 7 or the words “Min”/“Max”.
• 📟 Electronic panel: backlit buttons (often touch-sensitive) and a digital display showing the temperature. Located on the door or top of the cabinet. Popular in models Atlant series XM and NM.
• ☝ Touch panel: smooth surface without physical buttons, response to touch. Found in the latest models (for example, Atlant NRBM 2023–2026).

To accurately identify the type of control, look at:

1. Availability display: if there is a screen with numbers, this is an electronic or touch system.
2. Button material: plastic keys - electronic panel; metal wheels - mechanical.
3. Location of controls: inside the chamber - mechanics; there is electronics on the outside of the door.

⚠️ Attention: In some models Atlant (for example, MXM-2835) the freezer compartment is controlled separately from the refrigerator compartment. If you do not find the freeze control on the main panel, check the inside wall of the freezer - there may be a hidden switch there.

2. Turning on freezing in models with mechanical control

Mechanical refrigerators Atlant (series MHM, MX) are controlled using physical regulators. To turn on or increase freezing, follow these steps:

1. Open the refrigerator compartment and find the temperature regulator. It can be:
• 🔘 In the form of a round wheel with numbers (usually from 1 to 7).
• ☀️ In the form of a slider with “Colder”/“Warmer” marks.

Turn the knob clockwise (or move slider towards “Colder”) to the desired value. For standard freezing, position 3–4is sufficient, for mode super freezing — 5–7.

Close the door and wait 2-3 hours - the temperature in the freezer will stabilize.

Features of mechanical models:

• ❄️ The mode super freeze is turned on automatically when the regulator is set to maximum (position 7). In some models, there is a separate button for this Super Freeze.
• 🔋 The higher the number on the regulator, the more intense the compressor works and the more electricity the refrigerator consumes.
• 📉 If the temperature in the freezer is already low (below −18°C), and you set the maximum, possible freezing products (formation of ice crust).

If, after changing the settings, the refrigerator does not start to freeze more, check:

• 🔌 Is the refrigerator connected to the network (the power indicator should be on).
• 🧊 Is the mode turned on vacation (if there is a separate button Vacation).
• 🌡️ Is the compressor overheated (touch the back wall - it should be warm, but not hot).

3. Electronic control: buttons and display

In refrigerators Atlant with an electronic panel (series XM, NM, HR), freezing is activated through the menu on the display. The algorithm depends on the model, but the general scheme looks like this:

1. Find the button on the control panel Freezer (freezer) or Super Freeze (super freeze). It can be indicated by a snowflake ❄️.
2. Press the button once - the indicator SF (Super Freeze) will light up on the display or the snowflake icon will blink.
3. To adjust the temperature, use button +/– or Temp. The optimal range for the freezer: from −18°C to −24°C.
4. Confirm the settings with the button OK or wait for automatic saving (in most models - after 5 seconds).

Control examples for popular models:

Important nuances of electronic models:

• ⏳ Mode super freeze automatically turns off after 48–72 hours (depending on model). To extend it, you need to press the button Super Freeze.
• 🔄 If the indicator flashes on the display Alarm or Error, this may mean temperature sensor malfunction or evaporator icing.
• 📊 In some models (for example Atlant XM 6021), the freezer temperature is linked to the refrigerator compartment. If you lower the degrees in the main compartment, the freezer also becomes colder.

4. Touch control: hidden functions

The latest models Atlant (series NRBM, XP) are equipped with touch panels that respond to a light touch. To turn on freezing:

1. Touch the control panel - it should “wake up” (the backlight will light up).
2. Find the icon on the screen freezers (usually a snowflake ❄️ or the inscription Freezer).
3. Hold your finger on the icon for 2-3 seconds until the settings menu appears.
4. Select mode:
   • 📉 Standard (−18°C) - for normal storage.
   • ❄️ Super Freeze (−24°C and below) - for quick freezing.
   • ⏱️ Eco —energy saving mode (temperature −16°C).

Confirm your choice by touching the check mark or button OK.

Features of touch models:

• 🔒 To avoid accidental clicks, the panel will lock after 10 seconds of inactivity. To unlock, tap it twice.
• 📲 In some refrigerators (for example, Atlant NRBM 6214-100), you can control the freezing via a mobile application Atlantic Smart. To do this, you need to connect the refrigerator to. Wi-Fi.
• 🔄 Touch panels are sensitive to moisture. If the screen does not respond, wipe it with a dry cloth.

What to do if the sensor does not respond?

If the panel does not respond to touches, try disconnecting the refrigerator from the network for 1-2 minutes, then turning it on again. If the problem persists, the firmware may fail - contact the service center.

5. Super freezing mode: when and how to use

Function superfreezing (Super Freeze) is designed for quick operation. freezing a large volume of food (for example, after shopping in a hypermarket). It works on the principle of intensive cooling, in which the compressor runs without interruption, and the temperature in the freezer drops to −24°C...−30°C.

When to turn on Super Freeze:

• 🛒 You loaded more than 4 kg of unfrozen food into the freezer (meat, fish, berries).
• 🍗 It is necessary to freeze semi-finished products or liquid dishes (soups, sauces) without the formation of large ice crystals.
• 🔄 The refrigerator has been defrosted, and you need to quickly restore the temperature.

How to use the mode correctly:

1. Turn on Super Freeze 2-3 hours before loading the products.
2. Arrange the products in one layer on the freezer shelves to ensure uniform freezing.
3. After freezing (through 12–24 hours) turn off the mode to reduce the load on the compressor.

⚠️ Attention: Do not leave Super Freeze on for more than 72 hours in a row. This leads to:

• ⚡ Increased energy consumption (up to 30%. but increases energy consumption. Use it only when necessary, and not constantly.
• ❄️ Excess ice formation on the evaporator (frequent defrosting will be required).
• 🔊 Increased noise from the compressor (may interfere at night).

6. Typical errors and how to avoid them

Many users encounter problems when turning on freezing due to incorrect actions. Here are the most common errors and ways to solve them:

Critical error: turning on super freezing when the evaporator is already frozen. This leads to blocking of the ventilation duct and failure of the compressor. If you notice thick ice. more than 5 mm, first defrost the refrigerator, then turn on the mode.

Other common problems:

• 🔌 The refrigerator does not respond to the settings: check is it connected to the outlet and is the power indicator on? Perhaps the circuit breaker has tripped.
• 🌡️ The temperature in the freezer does not correspond to the set one: calibrate the sensor (in electronic models this is done through the service menu, the access code is usually 8888).
• 🔊 Extraneous sounds during operation: gurgling and slight crackling are normal, but a loud knock or grinding indicates a compressor malfunction.

7. Optimal temperature conditions for different products

Not all products require the same freezing temperature. Excessive cooling can spoil the texture (for example, make the meat “rubbery”), and insufficient cooling can lead to spoilage. Here are the recommended modes:

Freezing tips:

• 📦 Use vacuum bags or containers with a lid - this prevents the food from chapping.
• 🏷️ Sign packages with the date of freezing (with a marker or stickers).
• ❄️ Do not put hot foods in the freezer - this increases the temperature and increases the load on the compressor.

8. Diagnosis of faults: when to contact service

If, after all the manipulations, the freezing does not turn on or does not work correctly, there may be a technical malfunction. Here are the signs for which you should call a technician:

• 🔴 The display shows an error E1, E2 or F (sensor fault codes).
• 🌡️ The temperature in the freezer does not drop below −10°C despite the set −18°C.
• 🔊 The compressor turns on for 1-2 seconds and immediately turns off (relay clicks).
• ❄️ “coat” of ice more than 1 cm thick.

What you can check yourself:

1. 🔌 Food: make sure that the refrigerator is connected to a working outlet (try another appliance).
2. 🧲 Door seal: attach a sheet of paper to the closed door - if it falls out, the seal needs to be replaced.
3. 🌬️ Ventilation holes: check if food is blocking air circulation.

⚠️ Attention: If the refrigerator Atlant is under warranty, not disassemble it yourself! This will void the warranty. Contact an authorized service center (the list is on the manufacturer’s website).

The cost of repairing common faults (approximately):

• 🔧 Replacement of the thermostat: 1,500–2,500 ₽.
• ❄️ Elimination of evaporator icing: 2,000–3,500 ₽.
• 🔌 Repair of electronic board: 3,000–5 000 ₽.

FAQ: Frequently asked questions about freezing in refrigerators Atlant

❓ How often do you need to defrost the freezer if super freezing is turned on?

When using the mode intensively Super Freeze defrost It is recommended to carry out every 3-4 months (instead of the standard 6 months). This is due to increased formation of frost on the evaporator. If your model has a system No Frost, defrosting is required less often - once every 6-12 months.

❓ Is it possible to turn on super freezing on an ongoing basis?

No, this will lead to:

• ⚡ Increased energy consumption (25–40% higher than normal).
• 🔊 Increased noise from the compressor.
• ❄️ Rapid accumulation of ice on the walls.

Use Super Freeze only for quick freezing of large batches of food (no longer 72 hours in a row).

❓ Why did the refrigerator start to work loudly after turning on the freezing?

When the mode is activated Super Freeze the compressor goes to maximum power, which is accompanied by:

• 🔊 Increased humming (normal in the first 1-2 hours).
• 💨 More active fan operation (in models with No Frost).

If the noise does not decrease after 3-4 hours or extraneous sounds appear (grinding, knocking), turn off the refrigerator and call a technician.

❓ What temperature should be in the freezer for storage ice cream?

The optimal temperature for ice cream is −18°C…−20°C. At a higher temperature it will become soft, and at −24°C and below it may lose its taste (ice crystals will damage the structure).

In refrigerators Atlant s zone Fresh Freeze (if any) it is better to store ice cream in the main compartment of the freezer, and not in the freshness zone.

❓ What to do if after defrosting the freezer does not freeze?

Possible reasons and solutions:

• 🔌 Not plugged in: check the outlet and power cord.
• 🌡️ Settings failed: set the temperature again (the settings may have been lost after disconnecting).
• ❄️ Ice on the evaporator: if defrosting was incomplete, repeat it (the refrigerator must thaw for at least 12 hours).
• 🔧 Compressor malfunction: if clicks are heard after turning on, but the motor does not start, diagnostics is needed.