When planning the purchase of new household appliances or moving to another apartment, one of the key issues is the weight of the unit. For owners of equipment of the Belarusian brand Atlant this parameter often comes as a surprise, since the dimensions do not always meet expectations in terms of weight. Double-chamber refrigerator is a complex engineering device, where every kilogram plays a role in stability and energy efficiency.
The question “how much does an Atlant two-chamber refrigerator weigh” does not have a universal answer, since the manufacturer’s model range covers dozens of series with different characteristics. From the type of compressor installed to the thickness of the thermal insulation layer - all these factors form the final number on the label. Understanding these nuances will help you plan delivery and installation correctly.
Below we will look in detail at what makes up the mass of modern and classic models, why an empty refrigerator can be heavier than it seems, and how these data affect the choice of location for installation.
⚠️ Attention: The weight indicated in the technical data sheet is nominal and may differ from the actual one. 3-5% depending on the year of manufacture and the specific batch of components.
Factors influencing the weight of refrigeration equipment
The main share in the total weight is the metal body and internal frame. Manufacturers use steel of different thicknesses, which directly affects noise insulation. Heavier models often have reinforced walls that better retain cold during short-term power outages. structural strength and sound insulation. Heavier models often have reinforced walls that better retain cold during short-term power outages.
The second critical element is the compressor. Models Atlant can use both classic piston units and more modern inverter motors. Piston compressors traditionally heavier than their inverter counterparts due to the presence of a massive electric motor and a metal casing. The difference in weight between two models of the same volume can reach 10-15 kg due to the type of engine.
The number of chambers and the defrosting system also influence the final figure. Two-chamber models with a No Frost system are usually heavier than their counterparts with a drip system, as they require the installation of additional fans, heaters and a more complex air duct system. In addition, modern energy efficiency requirements dictate the use of a thicker layer of insulating foam, which also adds kilograms.
- 🏗️ The thickness of the walls and the quality of the metal of the housing determine the basic strength.
- ❄️ The type of refrigerant and the number of heat exchanger tubes affect the overall weight.
- ⚙️ The presence of a second compressor in Full No Frost systems significantly makes the device heavier.
- 🧱 Internal equipment: shelves made of tempered glass are heavier than plastic counterparts.
Comparative table of weights of popular Atlant series
So that you don’t have to guess, we have systematized the data for the most common series. Note that the height of a refrigerator often correlates with its weight, but not always linearly. Medium-height models can be heavier than tall and narrow “pencil cases” due to the width and volume of the chambers.
The table shows average values for two-chamber models. The numbers are relevant for devices with and without original packaging. When calculating the load on the floor or planning to climb stairs, always take the maximum value.
| Series / Model | Height (cm) | Total volume (l) | Net weight (kg) | Weight gross (kg) |
|---|---|---|---|---|
| Atlant XM-4008 | 150 | 250 | 52 | 56 |
| Atlant XM-4423 | 178 | 340 | 63 | 68 |
| Atlant XM-4625 (No Frost) | 205 | 360 | 72 | 78 |
| Atlant XM-6021 | 185 | 368 | 65 | 70 |
| Atlant XM-4210 | 145 | 234 | 48 | 52 |
As can be seen from the data, the spread is from 48 to 72 kilograms in pure form. This is a significant difference if you plan to bring equipment to a high floor without a freight elevator. Models of the series 4000 are considered classic "average", while the series 6000 and models with the index No Frost gravitate towards the upper end of the weight spectrum.
Why is gross weight important?
Gross weight includes packaging (foam plastic, cardboard, polyethylene). It is critical for calculating the lifting capacity of an elevator or ordering the services of loaders, since the dimensions of the packaging significantly increase the complexity of maneuvering.
Differences between models with a drip system and No Frost
The choice between a drip defrosting system and No Frost is often determined by convenience, but few people think about the physical difference between these devices. Refrigerators with an automatic moisture removal system are structurally simpler. They have fewer components, plastic parts and electronics, which makes them lighter.
The system No Frost requires the installation of a hidden type evaporator, a fan for forced air circulation and a heating element for defrosting. All these components have their own weight. In addition, the bodies of such refrigerators are often made more massive for better thermal insulation, since a constant air flow requires a stable temperature regime.
If you are choosing between two models of the same volume, but different cooling systems, the model with No Frost will be heavier on average by 5-8 kg. This should be taken into account when purchasing magnetic holders or shelf organizers for the door - excessive load can deform the plastic of lighter models.
- 💨 No Frost system fans add weight and create additional attachment points.
- 🌡️ A hidden evaporator requires a thicker layer of case insulation.
- 🔌 Additional electronics for defrosting control also contribute.
⚠️ Attention: When transporting No Frost refrigerators, strictly monitor the tilt angle. Displacement of a heavy compressor and fans inside the case during improper transportation can lead to broken tubes or damage to the motor mounts.
The influence of the number of compressors on the total weight
Equipment Atlant is famous for its reliability, and many models still use time-tested single-compressor circuits. However, in premium and large two-chamber refrigerators, a system with two compressors is often found - separately for the refrigeration and freezer compartments.
The presence of a second motor-compressor is not just a doubling of the cooling power, it is a significant increase in weight. Additional compressor weighs from 8 to 12 kilograms. the weight of the additional copper piping, valves and fasteners, the difference becomes even more noticeable.
The number of compressors can be determined not only by weight, but also by the technical data sheet or visually (by the presence of two motors at the back). Dual-compressor models tend to be quieter and more economical, but require greater care when moving them. Their center of gravity is shifted, which affects stability when carrying.
☑️ Check before lifting
Features of transportation and lifting to the floor
Knowing the exact weight of your Atlanta, you can properly organize its movement. Light models up to 55 kg can theoretically be carried by one physically strong person, but this is strictly not recommended due to the risk of injuring your back or dropping the unit. Standard practice for two-compartment refrigerators is for two people to work.
If your home has narrow flights of stairs or does not have a freight elevator, weight becomes a critical parameter. For models heavier than 70 kg (gross), manual climbing of stairs may be difficult. In such cases, professional loaders use special belts that redistribute the load, or use ladder carts.
When moving, it is important to take into account not only mass, but also inertia. A heavy refrigerator is more difficult to stop if it starts to slide on the floor. Use thick cardboard or special slip mats to avoid scratching the floor covering and to facilitate the installation process.
⚠️ Attention: After transportation, the two-chamber refrigerator must stand in an upright position for at least 2-4 hours (or better yet, a day) before turning it on. This is necessary to allow oil to drain into the compressor, especially if the device was tilted during transportation.
How to find out the exact weight of a specific model
If you did not find your model in the tables above, there are several ways to obtain accurate information. The most reliable source is the technical data sheet that comes with the device. It shows the net weight (of the device itself) and the gross weight (in the packaging).
Information can also be found on the factory sticker, which is usually located inside the refrigerator compartment on the side wall or on the back of the metal casing of the compressor. Look for the "Net Weight" or "Net Weight" parameter. In online stores, this data is often indicated in the “Characteristics” section, but may contain errors, so checking with the official website of the manufacturer Atlant will not be superfluous.
Remember that the weight may vary slightly from year to year, even within the same model due to changes in component suppliers. If accuracy down to a kilogram is critical for you (for example, for installation on a hanging shelf or a weak floor), it is better to weigh the device on floor scales before installation.
Is it possible to independently reduce the weight of a refrigerator for moving?
Technically, you can remove doors, shelves, drawers and containers. This will reduce the weight by 5-10 kg and make it easier to carry. However, removing the compressor, condenser or other elements of the cooling system is strictly prohibited - this will break the seal and require expensive refilling with freon.
Does the weight of the Atlant refrigerator affect energy consumption?
There is no direct connection. Weight is determined by materials and design. However, heavier models often have better insulation and more powerful but efficient compressors, which can ultimately result in lower energy consumption compared to lighter, but poorly insulated analogues.
Why may the Atlant refrigerator seem heavier than stated?
This may occur due to the accumulation of ice in the evaporator (if the system fails), moisture entering the lower compartment or displacement of internal components during transportation. Inertia also adds a feeling of heaviness when rolling on an uneven floor.
What is the maximum weight that a shelf in a two-chamber Atlanta can withstand?
Standard glass shelves in Atlant refrigerators are usually designed for a uniform load of up to 20-25 kg. Exceeding this limit can lead to the destruction of glass, especially if the product has sharp edges or pinpoint pressure on the surface.