Intensive freezing, often referred to as Super Freeze or simply “Snowflake”, is one of the most useful features in modern refrigeration units. It allows you to quickly freeze a large amount of fresh food without defrosting existing supplies in the freezer. However, many equipment owners Atlant face a situation where the indicator is constantly on, and the function does not turn off automatically, which can lead to excessive power consumption or excessive cooling of products.
Understanding the principle of operation of this mode is critical for the long service life of the compressor. In intensive cooling mode, the motor works at the limit of its capabilities, trying to lower the temperature in the freezer compartment to extreme values, usually around -24...-26 degrees Celsius. If you forget to turn off this option, the resource of the unit will be consumed much faster than during normal operation.
In this article we will analyze in detail the algorithms for disabling the function for various series of refrigerators from the Belarusian manufacturer. Regardless of what model you have - with an electronic display or mechanical controls - you can find a solution to your problem. Carefully study the instructions will help you avoid errors in control.
The principle of operation and purpose of the Super Freeze mode
Mode super freeze created to quickly reduce the temperature in the freezer compartment to the lowest possible values. This is necessary when you load a large amount of room temperature food into the chamber. The usual cooling cycle may not cope with thermal shock, which will lead to partial thawing of already frozen stocks and the formation of an ice crust.
When this function is activated, compressor the refrigerator Atlant goes into continuous operation mode, ignoring standard on and off cycles. At this moment, the thermostat either turns off or operates according to a modified algorithm, allowing the temperature to fall below the normal shutdown threshold. This creates a “shock freezing” effect that preserves the cell structure in the products.
⚠️ Attention: Long-term operation in super freezing mode (more than 48 hours) unnecessarily can lead to overheating of the motor-compressor and shorten its service life.
It is important to understand that in different models Atlant the operating logic may differ. In some cases, the function turns off automatically after a certain time, in others it requires manual intervention. Manual control gives the user complete control, but requires discipline.
Determining the type of control of your refrigerator
Before To start disabling the function, you must accurately identify the control type of your model. The sequence of actions depends on this. Refrigerators Atlant are divided into two main groups according to the type of interface: with electronic control and mechanical (electromechanical).
Models with electronic control are easily recognized by the presence of a digital display on the front panel of the door or in the upper part of the body. The display shows the current temperature, as well as indicators operating modes. Control is carried out using touch buttons or keys located next to the screen.
In models with mechanical controls, inside the refrigerator compartment, usually on the back wall or on the ceiling, there is a rotary control with numbers from 1 to 7 (or from Min to Max). In such models, the super freezing mode is often implemented through a separate button with indicator or combined with a freezer temperature regulator.
Below is a table that helps you quickly determine the type of control by refrigerator series:
| Series refrigerator | Control type | Panel location | Presence of display |
|---|---|---|---|
| Atlant XM-4008, 4009 | Mechanical | Inside the camera | No |
| Atlant XM-4421, 4423 | Electronic | On the door | Yes |
| Atlant XM-6021, 6023 | Electronic | On the door | Yes |
| Atlant XM-1704 | Mechanical | Inside the chamber | No |
If you are not sure about the model, look at technical data sheet or the sticker inside the refrigerator compartment. The exact article number is indicated there, by which you can find the corresponding instructions.
Where can I find the serial number?
The serial number and model of the device are usually indicated on a sticker located inside the refrigerator compartment on the right side wall or on the ceiling. Also, a duplicate of the sticker may be on the back wall of the case or in the warranty card.
Instructions for models with electronic control
In refrigerators Atlant with electronic control, the process of turning off the intensive freezing mode is as standardized as possible. Typically, this function is provided by a button with an image of a snowflake or an inscription Super. The algorithm of actions, as a rule, is the same for most modern models.
To disable the mode, you must perform the following steps:
- 🔘 Find on the control panel the button with the icon snowflakes or the inscription Super Freeze.
- 🔘 Press this button once with a short press. Some models require a hold for 3 seconds.
- 🔘 Watch indicator: if the red indicator next to the button goes out, then the mode is disabled.
- 🔘 Check the display: the temperature should begin to return to the set values (usually -18°C).
Some modifications with touch control may require unlocking the panel before making changes. If the buttons do not respond to pressing, try pressing and holding the button with the image of a lock for 3-5 seconds until a sound signal appears.
☑️ Checklist for disabling the mode
If after After pressing the button, the indicator continues to light, but the temperature does not change, perhaps there has been a failure in electronic module. Try turning off the power to the refrigerator for 10-15 minutes and then turning it on again. Often this helps to reset the control logic error.
Disabling the function in models with a mechanical regulator
In models with mechanical control the situation is different. Here, the super freezing mode often does not have a separate button, but is activated by turning the freezer temperature regulator to the extreme position (usually indicated by the number 7 or the word Max). Some older models Atlant may have a separate button with a red indicator.
If you have a separate button with a red indicator (often located next to the regulator inside the camera):
- ❄️ Press the button again to open the circuit forced freezing.
- ❄️ The red indicator should go out, which signals a return to the normal operating cycle.
- ❄️ The temperature regulator can be left in the same position or adjust.
In the case where there is no separate button, the super freezing mode is activated by setting the regulator to maximum. To turn it off, you need to:
- 🌡️ Turn the temperature control knob to the position corresponding to normal operation (usually the numbers 2, 3 or 4).
- 🌡️ Make sure that the compressor switched to intermittent operation mode (periodically turns on and off).
⚠️ Attention: Do not turn the temperature regulator sharply or with force. Mechanical thermostats are sensitive to physical impact and can fail if handled roughly.
After switching the regulator, the temperature in the chamber will rise slowly. This is a normal process. You should not turn it on again maximum coolingif the food has not yet reached the desired temperature, it is better to wait a few hours.
Automatic shutdown and time intervals
Many users are wondering: is it necessary to disable this feature manually? Most modern models Atlant with electronic control have a timer automatic shutdown. Usually it ranges from 12 to 72 hours, depending on the specific modification and year of manufacture.
After this time microprocessor it independently returns the refrigerator to normal operation, and the snowflake indicator goes out. This is a protection against user forgetfulness. However, you should not rely only on automation, especially if you have loaded the chamber with room temperature products - the timer may not have time to complete the freezing cycle to the end.
In models with mechanical control, automatic shutdown, as a rule, no. If you turn the control to the “Super Freeze” position (or press the button with the red indicator), the refrigerator will operate in this mode until you manually return the settings back.
If you plan to freeze a small amount of food, it is better not to use this mode at all, but simply load the food into the chamber, having previously cooled it in the main compartment. This will reduce the load on the unit.
Diagnosis of problems: if the mode does not turn off
There are situations when all manipulations are performed correctly, but the super freezing mode does not turn off, the indicator is on, and the compressor hums without interruption. This may indicate a malfunction. One of the common causes is sticky contacts buttons or relays.
The problem may also lie in the temperature sensor. If thermal sensor transmits incorrect data about the temperature in the chamber, the control unit may “think” that the products are not yet frozen and continue to maintain the active freezing mode.
Main symptoms of a malfunction:
- 🔥 Compressor operates around the clock without stopping for more than 24 hours.
- 🔥 A thick coat of ice has formed on the walls of the freezer compartment ice coat.
- 🔥 The mode indicator flashes or lights up, but the temperature does not correspond to the set one.
⚠️ Attention: If the refrigerator operates in super freezing mode constantly, this can lead to freezing of the evaporator and difficulty in air circulation, which will ultimately disable the equipment.
In such cases, it is recommended to call a specialist for diagnostics electrical circuit and checking the sensors. Self-repair of electronic units without the appropriate knowledge is not recommended.
Frequently asked questions (FAQ)
How long can you keep the super freezing switched on?
The optimal operating time for the super freezing mode is from 12 to 24 hours. It is not recommended to keep it turned on for more than 48 hours unless necessary, as this leads to increased wear on the compressor and excessive energy consumption.
Why does the red indicator light up after the button is turned off?
The red indicator may light up for some time after the mode is turned off, until the temperature in the chamber rises to a normal value (above -18°C). If the indicator lights up for a long time when the mode is off, the sensor may be faulty or the seal of the chamber is broken.
Is it possible to freeze hot foods in this mode?
It is strictly not recommended to place hot or warm foods in the freezer, even in super freezing mode. This places extreme stress on the compressor and can cause damage to nearby frozen food due to localized temperature increases.
What should you do if the buttons on the panel do not respond?
If the control panel is locked, locate the button with the picture of a lock and hold it for 3-5 seconds. If there is no reaction, try turning off the power to the refrigerator for 10-15 minutes to reboot the electronic control module.