How to properly turn off the freezer in the Atlant refrigerator: instructions for all models

Turning off the freezer in the refrigerator Atlant may be needed in a variety of situations: from temporary energy saving to preparation for long-term departure or repairs. However, not all users know that simply unplugging the plug from the socket is not the best solution. Incorrect actions can lead to compressor breakdown, the formation of ice jams in the system, or even failure of the electronic control unit.

In this article we will figure out how safely turn off the freezer on refrigerators Atlant different series - from classic mechanical models (MHM-1705, MX-2824) to modern ones with electronic control (NRM-6208, NT-4427). You will learn which buttons to press, what to do with food before turning it off, and how to avoid common mistakes that lead to expensive repairs.

We will pay special attention to the nuances: is it possible to turn off the freezer without affecting the main chamber, how will this affect the operation of the refrigerator as a whole, and what to do if after turning off The freezer stopped turning on. For clarity, we present diagrams of control panels and a table of compatibility of instructions with popular models.

Why might you need to turn off the freezer?

At first glance, the freezer is an integral part of the refrigerator, and turning it off seems pointless. However, in practice there are at least 5 good reasons to do this:

• 💰 Energy savings. The freezer consumes up to 30% of the refrigerator's energy. If you do not store frozen food, turning it off will reduce your electricity bills by 10–15%.
• 🔧 Preparation for repair. When replacing a thermostat, compressor, or a freon leak, the technician often asks you to turn off the freezer in advance.
• ❄️ Defrosting or cleaning. Modern models with the system require shutdown before deep cleaning. If you are leaving for 1-2 months, it is better to turn off the freezer to avoid overloading the system. Atlant with the system No Frost require shutdown before deep cleaning.
• 🏡 Long absence. If you are leaving for 1-2 months, it is better to turn off the freezer to avoid overloading the system.
• 🛠️ Fault diagnosis. For example, if the refrigerator does not freeze, the technician may ask you to turn off the freezer to check the compressor.

It is important to understand that complete freezer shutdown is not equivalent to switching it to the “Vacation” mode (if your model has one). In the “Holiday” mode, the compressor operates in a gentle mode, maintaining the minimum temperature, while a complete shutdown completely stops cooling.

⚠️ Attention: If your refrigerator Atlant was manufactured before 2010, before turning off the freezer, check whether the model has a separate cooling circuit. In older systems, turning off the freezer can cause the entire refrigerator to stop.

Models Atlant with mechanical control: step-by-step instructions

Refrigerators Atlant with mechanical control (MHM-1705, MX-2824, MX-2831 etc.) are equipped with rotary temperature controllers. They turn off the freezer in the easiest way - just turn the knob to the “Off” position. or "0". However, there are nuances that many do not know about.

Here's how to do it correctly:

1. Empty the freezer from products. If you plan to store them at room temperature, use thermal bags or cooler bags.
2. Find the freezer regulator. It is usually located inside the camera (for example, in MHM-1705) or on the top panel (in MX-2824). The regulator can be labeled as “Morozilka”, “Freezer” or simply have a snowflake ❄️.
3. Turn the knob counterclockwise all the way. On some models, the “Off” position marked with a dot or inscription OFF.
4. Wait 10-15 minutes. The compressor should stop completely (you will hear the relay click).

If the main chamber continues to work after turning off the freezer, everything is fine. If the refrigerator is completely turned off, it means that in your model general cooling circuit, the freezer cannot be turned off separately.

Defreeze the chamber (if there is ice)|Transfer the food to a cool place|Check the position of the main chamber regulator|Turn off the "Super Freeze" function (if yes)-->

Electronic control: instructions for modern models

Refrigerators Atlant with an electronic display (NRM-6208, NT-4427, NM-4626 etc.) require a different approach. Here the freezer is turned off through the settings menu, and in some models there is a separate button for this. Let's consider both options.

Method 1: Shutdown button freezers

In models Atlant with touch controls (for example, NT-4427-100) there may be a separate button on the panel with a freezer icon (❄️) and the inscription “On/Off”. Algorithm of actions:

1. Press and hold the ❄️ button 3–5 secondsuntil “Off” appears on the display or the indicator does not will go out.
2. Wait for the sound signal (in some models it confirms the shutdown).
3. Check that the main chamber continues to work (the temperature of the refrigerator compartment should be on the display).

Method 2: Shutdown after menu

If there is no separate button, the freezer is turned off through the menu. For example, in the model NRM-6208-020 the path is as follows:

Settings → Operating modes → Freezer → Off

In some refrigerators Atlant with the display you need:

1. Press the button Menu (or “Settings”).
2. Select the item “Morozilka” (or “Freezer”).
3. Press OK and select “Off.” (Off).
4. Confirm the selection (usually with the button OK or hold Menu).

If after these steps the freezer does not turn off, check whether the “Super Freeze” mode is activated (Super Freeze). It blocks the freezer from turning off cameras.

Mechanical (handles)|Electronic (buttons)|Touch (display)|I don’t know-->

What to do if the freezer does not turn off?

Sometimes users are faced with the fact that the freezer continues to work despite everything manipulation. The reasons may be different:

• 🔄 Electronic unit freezing. Try turning off the refrigerator from the outlet for 10 minutes, then turning it on again.
• ❄️ Super Freeze mode is active. Disable it before attempting to turn off the freezer.
• 🔧 Malfunction of the thermostat or sensor. If the freezer does not respond to commands, the temperature sensor may be broken.
• 📶 Firmware failure (in electronic models). Flashing or resetting is required.

If the freezer does not turn off and the refrigerator makes unusual sounds (humming, clicking), do not try to disassemble it yourself - this can lead to freon leakage or damage to the compressor. In such cases, it is better to call a specialist.

⚠️ Attention: In refrigerators Atlant with a system No Frost forced shutdown of the freezer can cause icing of the fan. If noise or grinding noise appears after switching on, immediately turn off the refrigerator and let it thaw for 12–24 hours.

How does turning off the freezer affect the operation of the refrigerator?

Many fear that turning off freezers will negatively affect the refrigerator compartment. In fact, in most models Atlant these systems operate independently, but there are exceptions:

• ✅ Two-compressor models (NRM-6208, NT-4427): the freezer and refrigerator are controlled by separate compressors. Disabling one chamber does not affect the other.
• ⚠️ Single-compressor models (MHM-1705, MX-2824): if the freezer is turned off, the compressor may work less often, which will slightly increase the temperature in the main chamber (by 1–2°C).
• ❌ Old models (until 2005): turning off the freezer can completely stop refrigerator.

If you turned off the freezer, but noticed that the main chamber began to cool worse, check:

• Is the ventilation grill closed (in models with No Frost).
• Is the “Vacation” mode turned on (it increases the temperature in refrigerator up to +10°C).
• Is the refrigerator overloaded with food (this interferes with air circulation).

In two-compressor models, turning off the freezer, on the contrary, can increase service life the refrigerator, since one of the compressors will rest.

Common mistakes and how to avoid them

Even experienced users sometimes make mistakes when turning off the freezer. Here are the most common ones and ways to avoid them:

• 🔌 Unplugging the plug from the socket. This can lead to a power surge and failure of the electronic unit. Always turn off the freezer through the menu or regulator.
• ❄️ Shutdown without defrosting. ice, its melting can cause a short circuit. Always defrost the chamber before turning it off.
• 🕒 Too frequent. on/offThe compressor needs time to stabilize the pressure. Do not turn off the freezer more than once a day.
• 📱 Ignoring error signals. If after shutdown a code appears on the display (for example, E1 or F2), immediately check the instructions.

Another typical error — turning off the freezer when fully loaded. If the chamber is full of food, the compressor works at the limit, and a sudden shutdown can cause water hammer. Before turning off, make sure that the freezer is not overloaded.

⚠️ Attention: In refrigerators Atlant with an inverter compressor (models after 2018), frequent shutdowns of the freezer can reduce the life of the compressor. If you need to save energy, it is better to use the “Vacation” mode instead of completely turning it off.

How to turn it on again. freezer after shutdown?

Turning on the freezer after shutdown is a simple procedure, but there are nuances here too. If you turned off the freezer for a long time (more than a week), before turning it on:

1. Check the camera If necessary, rinse it with a weak solution of soda (1 tablespoon per 1 liter of water).
2. Make sure that the ventilation holes (if any) is not clogged with ice or debris.
3. Turn on the freezer via the menu or regulator. In electronic models, you may need to reset the settings (hold the button Menu 10 seconds).
4. Wait 2-4 hoursuntil the temperature stabilizes. Do not load food immediately - this will create additional load on the compressor.

If after turning on the freezer does not freeze, check:

• Whether the “Vacation” or “Eco” mode has been activated.
• If the air circulation is blocked (in models with No Frost).
• If the thermal protection fuse has tripped (in this case, you need to wait 30-60 minutes).

If the freezer turns on, but quickly turns off, the overheating protection may have tripped. This often happens if the refrigerator is too close to the wall or radiator.

FAQ: Frequently asked questions about turning off the freezer in the refrigerator Atlant

Is it possible to turn off the freezer without turning off the entire refrigerator?

Yes, in most models Atlant the freezer is turned off separately. The exception is old single-compressor models (up to. 2005), where turning off the freezer stops the entire refrigerator. Check your model in the table above.

What happens if you turn off the freezer for a long time (a month or more)?

With a long shutdown:

• B mold or an unpleasant odor may appear in the freezer (this can be solved by airing and cleaning).
• The oil in the compressor may thicken (it is recommended to turn on the freezer for 1-2 hours every 2 weeks).
• In models with No Frost the door seal may dry out (lubricate it with glycerin before turning it on).

Why did the refrigerator become louder after turning off the freezer?

This is normal if:

• The refrigerator is single-compressor - now the entire load goes to one chamber.
• The mode is turned on “Super cooling” (check the settings).
• Ventilation holes are clogged (clean them).

If the noise is accompanied by vibration or knocking, call a technician - the compressor mounts may be loose.

How to turn off the freezer if the display is broken?

If the electronic panel does not respond:

1. Disconnect the refrigerator from the network for 10 minutes (the error can be reset).
2. Try holding the button Menu or OK 10–15 seconds (emergency reset).
3. If this does not help, turn off the freezer via the thermostat (in mechanical models) or call a technician.

Do not try to disassemble the panel yourself - this may lead to loss of warranty.

Is it possible to turn off the freezer if the refrigerator has a No Frost system?

Yes, but with caution. In models with No Frost turning off the freezer stops the fan, which can lead to icing of the evaporator. If the freezer has been turned off for more than a day, let the refrigerator thaw for 12 hours before turning it on.