The choice of household appliances always begins with an assessment of the available space in the kitchen. The Belarusian plant Atlant offers a wide range of models that covers almost all standard niches found in standard apartments in the post-Soviet space and modern new buildings. Understanding what sizes refrigerators of this brand have allows you to avoid annoying mistakes when purchasing when the appliance simply does not fit through the doorway or does not fit into the set.
The dimensions of the units vary from compact “under the countertop” height of 85 cm to impressive two-meter giants. It is important to take into account not only the external parameters of the housing, but also the technological clearances necessary for normal operation of the compressor. In this article we will analyze in detail all existing standard sizes, provide accurate data on the series and help you make your choice.
It is worth noting that even within the same series, sizes may differ by several centimeters depending on the type of handle, the presence of a display or system No Frost. Therefore, you cannot rely on the general words “standard refrigerator” - every millimeter matters when planning the interior.
Standard two-chamber classic
The most common category that most consumers encounter. These are the usual tall refrigerators with a freezer compartment on the bottom or top. The standard width of such models is most often 60 cm, which fits perfectly into standard kitchen modules. However, the depth may vary, especially in models with an automatic defrosting system.
The height of classic two-chamber models usually ranges from 150 to 205 cm. Higher options, reaching two meters, often have an increased usable volume and belong to the category of Side-by-Side or simply roomy family models. In such units, it is critical to take into account the height of the ceilings and the possibility of bringing equipment into the apartment through doorways.
- 📏 Width 60 cm is the absolute standard for most series.
- 📏 Height from 160 to 205 cm - allows you to choose a model for any height.
- 📏 Depth 60-63 cm - requires taking into account protruding handles and radiator grilles.
When choosing a classic, pay attention to the series 4000 i 6000. They are bestsellers precisely because of their universal dimensions. If your kitchen is designed according to old GOST standards, then a 60 cm wide refrigerator will fit into a niche “like a glove,” but will require careful attention to rear ventilation.
Compact and narrow models for small kitchens
Owners of small apartments, studios or offices are often looking for solutions that do not occupy half the usable area. This is where narrow and low refrigerators come into play. Models with a width of 54-55 cm are considered narrow, which is 5-6 cm less than the standard. This small difference in practice gives a significant gain in space for passage or installation of additional furniture. Atlant. Models with a width of 54-55 cm are considered narrow, which is 5-6 cm less than the standard. This small difference in practice gives a significant gain in space for passage or installation of additional furniture.
Low models, often called “under the countertop,” have a height of about 85 cm. This allows them to be built directly under the kitchen countertop, creating a single work surface. However, it is worth remembering that in such models the volume of the freezer compartment is often sacrificed in favor of the refrigerator compartment, or the freezer is made in the form of a small box.
⚠️ Attention: When installing the refrigerator under the countertop, make sure that the height of the base and the countertop itself allows you to place a unit with a height of 85 cm. The standard height of kitchen modules can vary from 82 to 86 see
Series 1400 i 2400 are often presented in such compact form factors. They are great for cottages, hotel rooms or small families of one or two people. Despite their small dimensions, modern models maintain energy efficiency class A+ and higher.
Secrets of installing narrow models
Narrow refrigerators often have hinges that allow you to hang the door. However, in very narrow niches (less than 60 cm wide), make sure that the door opens to a full angle without interfering with adjacent cabinets. Sometimes it is necessary to install special limiters.
Dimensions of Side-by-Side refrigerators
Side-by-Side refrigerators are a solution for large kitchens and spacious houses. Their main difference is the vertical division: the freezer is located not at the bottom, but on the side, occupying approximately 30-40% of the width. The dimensions of such models Atlant significantly exceed standard ones.
The width of Side-by-Side models is usually from 80 to 90 cm. This requires a wide niche or a special place near the wall. The height of such giants often reaches 170-180 cm, and sometimes more. The depth is also increased to accommodate large baking sheets and bulky products.
| Parameter | Standard two-chamber | Side-by-Side | Narrow (Slim) |
|---|---|---|---|
| Width (cm) | 60 | 80-90 | 54-55 |
| Height (cm) | 150-205 | 170-180 | 85-150 |
| Depth (cm) | 60-63 | 65-70 | 55-60 |
| Volume (l) | 250-400 | 450-600 | 150-250 |
When purchasing a Side-by-Side, it is critical to measure not only the width of the opening, but also the turning radius of the door. The doors of such models are wide and heavy, they need a lot of space to open. Also consider the weight of the device - the floor must withstand a load of up to 100-120 kg when filled.
Technological clearances and ventilation
Many buyers They make the mistake of buying a refrigerator exactly the size of the niche. This is absolutely impossible to do. The compressor and condenser generate heat during operation, which must be effectively removed. If you “squeeze” the unit close to the cabinet walls, the service life of the compressor will be sharply reduced, and power consumption will increase.
For models Atlant with a rear radiator grille (drip system), a back gap of at least 5-7 cm is required. For models with No Frostwhere the heat exchanger is often hidden, the requirements may be different less strict towards the back wall, but more strict towards the side walls and top.
- 🔥 Back gap: minimum 5 cm for air circulation.
- 🔥 Side gaps: 2-3 cm on each side.
- 🔥 Top gap: minimum 10 cm, especially important for installation.
Pay special attention to models with the system Multi Flow. In them, air circulates throughout the entire volume, and a violation of external heat exchange conditions can lead to the formation of ice inside, even if the system is working properly. Correct installation is the key to quiet operation and long life of the equipment.
Nuances of embedding in a kitchen set
Built-in refrigerators Atlant have their own specific dimensions. They are devoid of decorative external decoration and have special fastenings for the facade panel. The dimensions of such models are standardized for European furniture modules, but require accuracy when ordering a kitchen.
There are two main types of installation: full and partial. When fully integrated, the refrigerator door is hidden behind the kitchen façade. It is important to take into account the thickness of the facade (usually 16-19 mm) when calculating hinges and gaps. If partial, the upper part of the refrigerator can remain open or be closed with a separate strip.
⚠️ Attention: Never install a built-in refrigerator without a decorative box or furniture walls, unless this is provided for by the design of a particular model. Thermal insulation of the walls of built-in models is often weaker than that of free-standing ones.
When designing a niche for embedding, be sure to leave ventilation ducts. Often a cut is required in the kitchen base and at the top of the cabinet (or in the countertop itself) to create an upward air flow. Without this, the refrigerator will work for wear.
☑️ Checking the niche for embedding
How to correctly take dimensions before purchasing
In order not to encounter a situation where the refrigerator does not fit through the door or does not fit into a niche, it is necessary to take proper measurements. Don't rely on memory or old kitchen drawings - the walls could be askew, and the tiles could add extra centimeters.
You will need a tape measure, a notepad and, preferably, an assistant. Measure all parameters in millimeters, since the count is in centimeters. Pay special attention to the diagonals of the openings when it comes to bringing equipment through narrow corridors.
- Measure the height from floor to ceiling at the installation site, as well as the height of the doorways along the route.
- Measure the width and depth of the niche at several points, choosing the minimum value.
- Take into account the opening of the doors: check whether they will rest against the handles of adjacent cabinets or the radiator.
Don't forget about the baseboard! Often the depth of the niche is measured without taking into account the protruding baseboard, which is why the refrigerator protrudes forward more than planned. Also check whether the unit fits into the doorway, taking into account the packaging box - its dimensions are always larger than the dimensions of the device itself.
What to do if the refrigerator is taller than a niche?
There is a common myth that you can unscrew the legs of the refrigerator or even remove the top cover to reduce the height. Removing the technical cover is strictly prohibited - this interferes with air circulation and can lead to a fire. The adjustable legs give a gain of a maximum of 2-3 cm. If you don’t fit in, look for a model below.
Frequently asked questions (FAQ)
What is the standard depth of Atlant refrigerators excluding the handle?
The standard depth of the body of most models is 60-63 cm. However, the handle can add another 2-3 cm. The depth with the door open depends on the model, but is usually about 110-115 cm from the back wall.
Is it possible to install the Atlant refrigerator close to the wall?
No, it is not possible. Even for models with side heat exchange (built into the sides of the cabinet), a minimum gap of 1-2 cm is required. For models with a rear grille, the gap must be at least 5 cm for free air circulation and to prevent overheating of the compressor.
Will a 60 cm wide refrigerator fit into a 60 cm niche?
Formally - yes, but functionally - no. For normal operation and opening of doors, the niche must be at least 2-4 cm wider than the refrigerator itself (1-2 cm on each side). Ideally, 65 cm for comfort.
What is the difference between the dimensions of models with No Frost and drip models?
Models with the No Frost system often have an increased depth (up to 65-68 cm) due to the presence of an evaporator and an air duct system on the back wall inside the chamber. They may also be a little wider due to thicker insulation.