Refrigerators Beko are popular due to their combination of affordable prices, reliability and modern features. However, even in the most advanced model, an incorrectly set temperature can lead to food spoilage, increased energy consumption, or the formation of ice. In this article, we will look at how to accurately adjust the temperature regime in the refrigerator and freezer Beko, what values are considered optimal for different types of products, and what to do if the standard settings do not work.
It is important to understand that there is no universal “ideal” mode - it depends on the load of the chambers, the frequency of door openings and even the temperature in the room. We will look at the manufacturer's basic recommendations, as well as nuances for models with electronic and mechanical controls. If your refrigerator Beko is equipped with a system No Frost or Frost Free, please note: setting the temperature in them has its own characteristics.
Before you start adjusting, check that the refrigerator is installed correctly: the distance to the wall is at least 5 cm, there is no direct sunlight, and the door is tightly adjacent. These factors directly affect the stability of the temperature inside the chambers.
Optimal temperature conditions for the refrigerator and freezer
The manufacturer Beko recommends maintaining the refrigerator compartment temperature from +2°C to +5°C. This is the range in which food remains fresh for the longest possible time and the risk of bacterial growth is minimal. For freezer the optimal mode is considered to be from −18°C to −20°C - it is suitable for long-term storage of meat, fish and frozen semi-finished products.
However, these values can be adjusted depending on situations:
- 🥦 Fresh vegetables and fruits are best stored at +4...+6°C (use the freshness zone if it is in the model).
- 🥩 Meat and fish require +1...+3°C for short-term storage (up to 2-3 days).
- 🧀 Dairy products (cheeses, yogurts, cottage cheese) are optimally kept at +3...+5°C.
- ❄️ Deep freezing (for example, for berries or seafood) may require −24°C.
In models Beko s freshness zones (for example, Beko RCNE530E20ZXB or Beko GNE114620X) the temperature in these compartments is automatically maintained at 0...+1°C - ideal for greens, berries and perishable foods. If your refrigerator is not equipped with such a zone, use the top shelves (it is usually colder there) for meat and fish.
⚠️ Attention: If the temperature in the freezer is set above −12°C, the shelf life of food is reduced by 2-3 times. For example, meat at −15°C is stored for up to 6 months, and at −10°C - only 1–2 months.
How to adjust the temperature in Beko refrigerators with mechanical control
Mechanical regulators are found in budget models Bekosuch as Beko CS 332020 or Beko RCSA 240K20WN. They are rotary switches (usually located inside the refrigerator compartment on the top panel or on the side) with a digital scale from 1 to 5 (less often up to 7). The numbers do not indicate degrees - these are conditional positions, where 1 corresponds to the highest temperature, and 5 to the lowest.
Setting algorithm:
- Determine the current position of the regulator (usually the factory setting is 3).
- To lower the temperature, turn the knob clockwise (toward increasing numbers).
- To increase it, counterclockwise (toward decreasing numbers).
- Wait 6-8 hours for the temperature to stabilize, then check with a thermometer.
Tip: If the refrigerator Beko has two compressors (separate for the refrigerator and freezer compartments), the controls will be independent. In models with a single compressor, the freezer usually has its own switch, but its setting also affects the refrigerator compartment.
Make sure that the refrigerator is not overloaded with food|Check the tightness of the door|Use a separate thermometer to check|Wait at least 6 hours before adjusting again|Assess for the formation of condensation or ice
-->
During the summer or at high room temperatures (above +25°C), it may be necessary to increase the position of the regulator by 1 division. In winter, if the refrigerator is in a cool place (for example, on a balcony), on the contrary, reduce the value by 1-2 positions to avoid freezing of food.
Electronic control: setting the temperature on the display
Modern models Beko (for example, Beko GNE V330APW, Beko RCNE645E50ZXB) are equipped with electronic display and touch or keypads. Here the temperature is set more precisely - in steps of 1°C. The interface may differ, but the general principle is the same:
- Find the button
Temp(orFridge/Freezerfor individual cameras). - Press it until the desired value is displayed on the display (for example, +4°C for a refrigerator).
- Confirm your selection with the button
OKorSet. - Repeat for the freezer compartment, if required.
Some models (for example, Beko CN 326220 X) have a mode Super Cooling (intensive cooling) and Super Freezing (fast freezing). They are activated by separate buttons and operate for a limited time (usually 2-6 hours), after which the refrigerator automatically returns to standard settings. These modes are useful if you have loaded a large amount of warm food.
| Beko model | Control type | Refrigerator compartment adjustment range | Freezer range |
|---|---|---|---|
| Beko RCNE530E20ZXB | Electronic | +2°C…+8°C | −16°C…−24°C |
| Beko GNE114620X | Electronic + freshness zone | +1°C…+7°C | −14°C…−26°C |
| Beko CS 332020 | Mechanical | Positions 1–5 (approx. +3°C…+8°C) | Positions 1–5 (approx. −12°C…−20°C) |
| Beko CN 326220 X | Electronic with Super Freezing mode | +2°C…+6°C | −18°C…−24°C (up to −30°C in Super Freezing mode) |
If the display shows an error (for example, E1 or H), this may indicate a malfunction of the temperature sensor. In this case, diagnostics are required - it is not always possible to solve the problem yourself.
Setting features in refrigerators with No Frost and Frost Free
Technologies No Frost and Frost Free (used in models Beko middle and premium segments) suggest automatic defrosting, but this does not mean that the temperature can not be controlled. In such refrigerators:
- ❄️ Fans evenly distribute the cold, so the temperature difference between shelves is minimal (no more than 1–2°C).
- 🔄 Mode No Frost in the freezer can temporarily increase the temperature during defrosting (this normal).
- ⚡ Energy consumption is higher than in drip models, but manual defrosting is not required.
For refrigerators Beko s No Frost the manufacturer recommends:
- Set the temperature refrigerator compartment is 1°C lower than standard (for example, +3°C instead of +4°C), as the system maintains it less stably due to cyclic operation of the fans.
- Do not load food close to the back wall - this interferes with air circulation.
- Check door seals regularly: in models with No Frost their wear leads to rapid freezing of the evaporator.
In Beko refrigerators with Frost Free technology, the freezer compartment is defrosted automatically, and the refrigerator compartment is defrosted using the drip principle. This means that condensation may form on the back wall of the refrigerator compartment (this is not a malfunction!).
Frequent errors when setting the temperature and their consequences
Even experienced users sometimes make mistakes that lead to food spoilage or breakdowns. Let's consider the most common ones:
- Setting maximum cooling “just in case” (for example, −24°C in the freezer with a half-empty chamber). This increases the load on the compressor and energy consumption by 20–30%.
- Ignoring zones with different temperatures. For example, placing milk on the door (the warmest place) or meat on the bottom shelf (where it may be too cold).
- Frequent temperature adjustment (for example, changing modes daily). This leads to wear on the thermostat and unstable operation.
- Closing the door with force after loading products. In models Beko with electronic control, this may confuse sensor readings.
Consequences of incorrect settings:
- 🍎 Products freeze (for example, cucumbers become soft and milk delaminates).
- 🦠 Development of mold and bacteria in too warm areas (especially in vegetable trays).
- ❄️ Formation of a thick layer of ice in the freezer (even in models with No Frost, if air circulation is impaired).
- ⚡ Increased compressor noise due to constant operation at maximum power.
⚠️ Attention: If, after adjusting the temperature, the refrigerator Beko does not cool to the set value within 24 hours, this may indicate a freon leak, a malfunction of the thermostat, or a clogged capillary tube. In such cases, professional diagnostics are required.
How to check the accuracy of the temperature without a thermometer
If you do not have a special thermometer for the refrigerator at hand, you can use improvised means:
- Standard outdoor thermometer (alcohol or electronic). Place it in a glass of water and leave it on the middle shelf of the refrigerator for 12 hours. The water temperature will be approximately equal to the temperature in the chamber.
- Indicator products:
- 🥛 Milk: if it starts to sour faster than 3 days, the temperature is above +5°C.
- 🍗 Raw meat: at +4°C and below it remains elastic, at +6°C and above it becomes sticky.
- ❄️ Ice in molds: if it melts in 12-24 hours, the freezer is not working efficiently enough.
- The walls of the refrigerator compartment should be slightly cool, but not icy.
- In the freezer, food should be hard to the touch (without soft areas).
For more accurate measurements, you can use infrared thermometer (point it at the inner wall of the chamber) or thermocouple multimeter. Remember that the temperature may vary on different shelves: the top one is usually 1-2°C colder than the bottom.
Tips for energy saving without loss of cooling quality
The refrigerator Beko consumes up to 30% of all electricity in the house, but this figure can be reduced without compromising food storage:
- 🔌 Disable Super Freezing mode immediately after freezing a large volume of food. It consumes 40% more energy.
- 📦 Fill the chambers by 60–70%. An empty refrigerator spends energy on cooling the air, and an overloaded one spends energy on maintaining the temperature.
- 🔄 Defrost the freezer when ice forms more than 5 mm thick (even in models with No Frost). Ice impairs heat transfer.
- 🌡️ Set the room temperature no higher than +25°C. Each degree higher increases energy consumption by 2–3%.
- 🚪 Check the seals 2 times a year. Their wear leads to cold losses of up to 30%.
In models Beko with a function Eco Mode (for example, Beko GNE V330APW), energy consumption is automatically reduced by 10–15% due to optimization of compressor operation. However, in this mode, the temperature can fluctuate within ±1°C from the set one, which is not critical for most products.
Another way to save is night mode (if it is provided in the model). The refrigerator switches to reduced power during the hours of minimum energy consumption (usually from 23:00 to 6:00). This is relevant for regions with differentiated electricity tariffs.
FAQ: Frequently asked questions about setting the temperature in Beko refrigerators
Is it possible to set different temperatures on different shelves?
In most models Beko the temperature is controlled centrally, but its distribution among the shelves depends on the design. The upper shelves are usually 1–2°C colder than the lower ones. If you need different zones, choose models with Multi AirFlow (for example, Beko GNE V330APW), where fans distribute the air evenly.
Why does the Beko refrigerator constantly work and does not turn off?
This may be caused by:
- Incorrect temperature setting (too low value).
- High room temperature (above +30°C).
- Faulty thermostat or sensor.
- Refrigerant leak (repair required).
First try raising the temperature by 1–2°C and check the door seals. If the problem persists, contact the service.
How to reset the temperature settings to factory settings?
In models with electronic control, hold down the button Temp (or Set) for 5-10 seconds until the display flashes. In mechanical refrigerators, return the controls to the middle position (usually “3”). After resetting, wait 24 hours for the temperature to stabilize.
Do you need to change the temperature in winter and summer?
Yes, seasonal adjustment is recommended:
- 🌞 In summer, increase the value by 1°C (for example, from +4°C to +3°C).
- ❄️ In winter, reduce by 1–2°C (for example, from −18°C to −16°C in the freezer) if the refrigerator is in an unheated room.
An exception is models with climatic class SN-T (for example, Beko RCNE530E20ZXB), which automatically adapt to ambient temperature.
What to do if the temperature indicator flashes on the display?
A flashing indicator signals:
- A sharp change in temperature (for example, after loading warm products). Wait 2-3 hours - the indicator should go out.
- Sensor malfunction. Try turning off the refrigerator for 10 minutes, then turning it on again. If the blinking continues, repairs are needed.