Modern refrigeration units require precise adjustment to ensure the safety of products and energy savings. Owners of household appliances Beko often face the need to change standard factory settings after the first installation or when the seasons change. Correct thermostat calibration allows you to prevent damage to perishable goods and avoid the formation of excess ice.
Control interfaces may differ significantly depending on the series of the device and the year of its manufacture. While older models use a mechanical dial with graduations, new systems NeoFrost offer digital control with degree accuracy. Understanding the operating principles of your specific device is the first step to proper operation.
Incorrectly set values can lead to vegetables starting to freeze and milk to sour ahead of time. In this article we will analyze in detail how to find the optimal balance and what nuances should be taken into account when setting up climate class your equipment.
Features of the Beko temperature control system
The company's engineers Beko implement various climate control systems inside the chambers, which directly affects the adjustment method. The main difference lies in the type cooling: drip system, No Frost or combined. In electronically controlled devices, all processes are coordinated by a central processor, which reads sensor readings.
Mechanical models rely on the physical opening of the thermostat contacts. There is no display here, and the setting is done by turning the knob. It is important to understand that the number on the mechanical handle does not mean degrees Celsius, but only indicates the intensity of the compressor. The higher the number, the colder it will be in the chamber.
Electronic control panels, often found on the door or inside the top of the refrigerator compartment, allow you to set specific temperature values. Such systems are usually equipped with indication an open door or an overheat alarm. The accuracy of electronic sensors is higher, which allows products to be stored longer.
Setting a mechanical thermostat
If your refrigerator Beko is equipped with a rotary handle inside the main chamber, you are dealing with a classic thermostat. It is usually located on the right wall or in the upper part of the internal volume. Adjustment is carried out by turning the pin clockwise or counterclockwise.
The graduation scale most often varies from Min (or 1) to Max (or 7). Setting the regulator to position Min makes the compressor operation minimal, the temperature in the chamber will be closer to 8-10°C. Turning to the side Max makes the unit work almost non-stop, lowering the temperature to 2-4°C.
The optimal mode for everyday use is considered the middle position, usually numbers 3 or 4. In the summer, when the ambient temperature is high, it may be necessary to increase cooling by moving the regulator closer to maximum. In winter, on the contrary, the load can be reduced.
- 🌡️ Position "1" or "Min" - economical mode, temperature about +8°C, suitable for storing drinks.
- ❄️ Position "3-4" - standard mode, providing +4...+5°C, ideal for most products.
- 🧊 Position "Max" or "7" - super-cooling mode, temperature about +2°C, used for a short time.
- ⛔ Position "0" or "Off" - complete shutdown of the refrigeration chamber, the compressor does not work.
⚠️ Attention: Do not set the mechanical regulator to maximum value (7) on a permanent basis. This leads to accelerated wear of the compressor and the formation of an ice crust on the back wall, even in drip systems.
Control via electronic display
Models with digital control, such as the series Beko CN or RCNEgive the user complete control over the climate. The control panel can be located on the outside of the door or inside, on the ceiling of the refrigerator compartment. To activate the setting mode, you often need to hold the button for 3 seconds.
The display shows the current readings for the refrigerator and freezer compartments. By pressing the appropriate buttons (often labeled as Fridge and Freezer or snowflake symbols), you can change the values. The standard change step is 1 degree Celsius.
The recommended setting for the refrigerator compartment is +4°C, and for the freezer - -18°C. Some models support a function Smart Coolingthat automatically adapts the operation of the compressor depending on the frequency of door opening. This helps save energy without losing storage quality.
| Mode | Refrigerator temperature | Freezer temperature | Purpose |
|---|---|---|---|
| Eco | +5°C | -18°C | Energy saving, standard storage |
| Max. cooling | +2°C | -24°C | Quick cooling of a large volume of products |
| Holiday | +14°C | -18°C | Long absence, freezer storage |
| Standard | +4°C | -18°C | Daily use |
☑️ Checking the display settings
Fast freezing and cooling modes
Function Super Freeze (Super Freeze) or Super Cool (Super Cooling) is designed for emergency temperature reduction. This is true when you have loaded a large amount of room temperature food into the refrigerator or freezer. Activating the mode causes the compressor to work continuously, ignoring standard shutdown cycles.
In refrigerators Beko with a system NeoFrost this process is controlled intelligently. Typically, Super Freeze mode will automatically turn off after 24-72 hours or after reaching the target temperature (eg -24°C). However, some models require manual shutdown of the function after the freezer is saturated.
Intensive operation modes should be used with caution. Prolonged operation at maximum capacity increases the load on the engine and increases energy consumption. After the food has frozen, be sure to return the settings to normal mode -18°C.
⚠️ Attention: Do not leave the “Super Freeze” mode on for more than 3 days unless necessary. This can lead to freezing of vegetables in the lower part of the refrigerator compartment and loss of their taste.
What happens inside during Super Freeze mode?
When this function is activated, the electronics blocks the compressor from turning off and turns on the fan at maximum speed. The refrigerant circulates through the system with maximum intensity, the bypass valves (if any) close, directing the entire resource to the freezer.
Special storage zones: Fresh Zone and 0°C
Models with dedicated freshness zones, often called EverFresh+ or 0°C Zone. These compartments maintain a temperature of about 0...+3°C and special humidity. Temperature control in such zones is often automatic, but may require activation of a special mode.
To activate the optimal mode for storing meat and fish in some models, you need to press a combination of buttons or select the appropriate item in the menu. This is especially important for products with a short shelf life, which are not intended for deep freezing, but quickly spoil at +5°C.
Humidity in such areas is controlled by dampers, the position of which can be changed manually. For vegetables and fruits, the damper is set to the high humidity position to prevent wilting. For meat and cheeses, on the contrary, the humidity is reduced to avoid the formation of mucus.
- 🥩 Meat and fish: temperature 0...+2°C, low humidity, storage up to 3 days.
- 🥦 Vegetables and fruits: temperature +3...+5°C, high humidity, storage up to 10 days.
- 🧀 Cheeses and delicacies: temperature +4°C, average humidity, aroma preservation.
- 🍼 Baby food: stable temperature +4°C, protection from bacteria.
Diagnostics of problems with temperature conditions
If the adjustment does not work expected result, one of the system elements may be faulty. A common problem is a stuck air duct damper, which blocks the flow of cold air from the freezer to the refrigerator compartment. In models Beko this may be accompanied by a characteristic hum.
It is also worth checking the rubber seals on the doors. If they do not fit tightly, warm air enters and the compressor cannot cope with cooling, working non-stop. The check can be carried out using a sheet of paper: hold it with the door and try to pull it out - it should hold tightly around the entire perimeter.
Sometimes error codes appear on the display indicating problems with temperature sensors (for example, E03, E06). In such cases, independent adjustment is impossible and you need to call a technician to replace the sensor element.
⚠️ Attention: Technical characteristics and location of controls may vary depending on the specific modification. Always check the paper instructions included with your model Bekoas firmware interfaces may be updated.
Why does the temperature fluctuate after defrosting?
After complete defrosting, the refrigerator needs until 24 hours to return to working mode. At this time, the sensors may show unstable values, and the compressor will work jerkily, gaining temperature gradually.
FAQ: Frequently asked questions
What temperature should be set in the Beko refrigerator in the summer?
In the summer, when the room temperature exceeds +25°C, it is recommended to set value +3°C or +4°C for the refrigeration chamber. If a mechanical regulator is used, turn the knob one notch towards higher power (closer to Max), but do not set it to maximum all the time.
Why do vegetables freeze near the back wall in a Beko refrigerator?
This happens if the thermostat is set to too low a temperature (high value) or if the food touches the back wall where the cooling element is located. Move the food away from the wall and reduce the cooling power.
What does the flashing temperature indicator on the display mean?
Flashing usually indicates that the temperature inside the chamber is higher than the set norm. This may be due to a recent load of warm food, the door being open for a long time or a malfunction. If the blinking does not stop after several hours of operation in normal mode, check that the door is closed tightly.
How to turn on the "Vacation" mode in the Beko refrigerator?
To activate the vacation mode, find the button with the image of a palm tree or the inscription Holiday. Press and hold it for 3 seconds. In this mode, the refrigerator compartment will maintain a temperature of about +14°C (to prevent mold from appearing), and the freezer will continue to operate as usual.