Setting the temperature in the Gorenje refrigerator: step-by-step instructions photo

Refrigerators Gorenje are famous for their reliability and intuitive controls, but even experienced users sometimes have questions about setting temperature conditions. Incorrectly set parameters can lead to overfreezing of food, excessive energy consumption, or, conversely, insufficient cooling. In this article we will look at how to correctly set the temperature in refrigerators Gorenje of different series - from budget models with mechanical controls to premium devices with an electronic display.

We will pay special attention to the nuances that the manufacturer does not always indicate in the instructions: how the mode affects the temperature, why it may be too cold in the freezer even with minimal settings, and how to avoid icing in models with the system SuperCoolwhy the freezer can be too cold even on the lowest settings, and how to avoid icing in models with the system NoFrost. You will also find a table of optimal temperatures for storing different types of products and tips for diagnosing faults if the refrigerator does not maintain the set mode.

If your refrigerator Gorenje is equipped with the function SmartCool or DynamicCool, a separate section will help you understand their features. And for owners of models with Total NoFrost we have prepared recommendations for setting up ventilation to avoid over-drying of food. All instructions are accompanied by step-by-step photos and diagrams of control panels - so you can quickly navigate even without paper documentation.

Types of control panels in Gorenje refrigerators

Before you start setting the temperature, it is important to determine which control panel is installed in your model. The algorithm of actions and available functions depend on this. Refrigerators Gorenje are equipped with three main types of panels:

• 🔄 Mechanical —temperature adjustment is carried out by rotary switches (for example, in models Gorenje RK 4181 or NRK 6191). Simple and reliable, but without an accurate indication of the current temperature.
• 📟 Electronic touch — control is carried out by buttons or touch panels (series NRC, NRKI). Allows you to set the temperature with an accuracy of 1°C and is often equipped with a display.
• 🤖 Electronic with display —advanced models (for example, Gorenje ORB173 or NRK 6201) with an LCD screen displaying current parameters and operating modes.

To find out the type of panel, inspect the top of the refrigerator (usually the panel is located inside the chamber on the top wall or outside on the door). In mechanical models you will see round controls with divisions from 1 to 5 (sometimes up to 7), in electronic models - buttons +/– or touch zones. Models with a display often have a separate button Menu or Set to access advanced settings.

⚠️ Attention: In refrigerators Gorenje with a system NoFrost (for example, series NRC or ORB) the temperature in the freezer can automatically drop by 1-2°C when the door is opened. This is normal behavior associated with the operation of the fan.

If your model is equipped with the Holiday function (vacation mode), the control panel may have a separate button or key combination to activate it. In this case, standard temperature controllers will be blocked, and the refrigerator will go into energy-saving mode with minimal cooling.

Optimal temperature conditions for the refrigerator and freezer

The manufacturer Gorenje recommends maintaining a temperature in the refrigerator compartment from +2°C to +5°C, and in the freezer - from –18°C to –24°C. However, these values ​​may vary depending on the occupancy of the cells, the frequency of door openings and external conditions (for example, the heat of the kitchen). Below is a table of optimal modes for different usage scenarios:

In Gorenje models with DynamicCool technology, the temperature in the refrigerator compartment can be automatically lowered by 1–2°C when placing a large amount of warm food (for example, after shopping). This is normal and does not require manual adjustment.

For the freezer Continuous operation in this mode increases the load on the compressor and can shorten the life of the refrigerator. If you need long-term storage of food at ultra-low temperatures, choose models with a function SuperFrostthat automatically turns off after 24-72 hours.

How to set the temperature in a Gorenje refrigerator with mechanical control

Mechanical temperature controllers are found in budget and mid-budget models Gorenje, such as RK 4181, NRK 6191 or ORB153. They are rotary knobs with numeric divisions (usually from 1 to 5 or 7). The higher the value, the colder it is in the chamber. Here are step-by-step instructions for setting up:

1. Determine which regulator is responsible for the refrigerator compartment and which one is responsible for the freezer compartment. In most models, the refrigerator compartment is regulated with the left handle, the freezer compartment - right.
2. Turn the refrigerator compartment regulator by one division 3 (this corresponds to approximately +4°C). For the freezer, set the value 4 (about -18°C).
3. Wait 6-8 hours until the temperature stabilizes. During this time, do not load the compartments with food and do not open the doors unless necessary.
4. Check the temperature using a thermometer (place it on the middle shelf of the refrigerator compartment). If necessary, adjust the setting by 1 division in one direction or another.

In some models (for example, Gorenje NRK 6191), the mechanical regulator may have an additional position Super or Max. It is designed for rapid cooling, but is not suitable for continuous use - the compressor will work non-stop, which will lead to increased wear.

⚠️ Attention: If after setting the temperature in the refrigerator compartment drops below +2°C, check that the food is not blocking the ventilation holes (usually located on the back wall). In models with a drip defrosting system, this can lead to icing.

For refrigerators with one compressor (for example, Gorenje RK 4181) a change in temperature in one chamber can affect the other. If you turn up the cold in your freezer, the refrigerator compartment will also become cooler. In this case, it is recommended to use average values ​​(3-4 for the freezer and 2-3 for the refrigerator).

Setting the temperature in Gorenje electronic models

Electronic control panels are found in most modern refrigerators Gorenjesuch as NRC 6191, NRKI 6201 or ORB173. They allow you to set the temperature with an accuracy of 1°C and are often equipped with a display that shows the current settings. Let's look at the setup process using the example of a popular model Gorenje NRC 6191:

1. Press the button Fridge (refrigerator compartment) or Freezer (freezer compartment). The current temperature value will flash on the display.
2. Use the + and –buttons to set the desired value. For the refrigerator compartment it is recommended +4°C, for the freezer - –18°C.
3. Confirm your choice by pressing the button OK or wait for automatic saving (after 5 seconds).
4. If your model supports the mode SuperCool (intensive cooling), it can be activated with a separate button. The mode will turn off automatically after 6 hours.

Models with touch controls (for example, Gorenje ORB173) use touch zones instead of buttons. To change the temperature, simply touch the refrigerator or freezer icon, then swipe up or down to increase/decrease the value. Some models also support voice control via the application Gorenje Home, but this function is only available in premium series.

If the display shows an error E1, E2 or E4, this may indicate problems with the temperature sensors. In this case:

• 🔌 Unplug the refrigerator for 10 minutes, then turn it on again.
• 🧊 Check if food is blocking the ventilation holes.
• 📞 If the error persists, contact a service center (the sensor may need to be replaced).

Setting features in Gorenje refrigerators with NoFrost

Models with the system NoFrost (for example, Gorenje NRC 6191, NRKI 6201) do not require manual defrosting, but have their own nuances when setting the temperature. The main difference is the presence of a fan that evenly distributes cold air throughout the chamber. This means that:

• ❄️ The temperature in different areas of the chamber may vary slightly (a difference of up to 2°C is normal).
• 🌀 The fan creates a slight noise, which increases with intensive cooling (for example, in the mode SuperCool).
• 🍎 Products NoFrostrefrigerators can dry out faster, so it is recommended to store them in containers or wrapped in film.

To adjust the temperature in models with NoFrost follow the standard procedure (described in the previous section), but consider the following recommendations:

• 🔹 Set in the refrigerator compartment the temperature is 1°C higher than in conventional models (for example, +5°C instead of +4°C). This compensates for the effect of airflow.
• 🔹 In the freezer compartment, you can use the mode –16°C instead of the standard -18°C, since the system NoFrost provides more uniform cooling.
• 🔹 Regularly (once every 1-2 months) clean the ventilation holes from dust using a vacuum cleaner or soft brush.

In refrigerators with Total NoFrost (for example, Gorenje ORB173) the temperature in the freezer may automatically drop to -26°C when the mode is activated SuperFrost. This is normal, but do not forget that the mode must be turned off after 24-48 hours, otherwise the compressor will work with increased load.

⚠️ Attention: If in the refrigerator s NoFrost ice forms on the back wall of the freezer, this may indicate a malfunction of the evaporator heater. Do not try to remove the ice mechanically - contact a service center.

SuperCool and SuperFrost mode: when and how to use

Functions SuperCool (intensive cooling of the refrigeration chamber) and SuperFrost (intensive freezing) are designed to quickly lower the temperature when loading a large amount of food. In refrigerators Gorenje these modes are activated by separate buttons or through the menu (in electronic models: Here's how to use them correctly:

To activate SuperCool:

1. Press the button SuperCool (usually indicated by a snowflake with an exclamation mark).
2. The mode indicator will light up on the display and the compressor will start working without stopping.
3. After 6-12 hours, the mode will turn off automatically and the refrigerator will return to standard settings.

For SuperFrost:

1. Press the button SuperFrost (snowflake with an asterisk).
2. Temperature in the freezer the chamber will drop to –24°C…–26°C.
3. The mode will turn off after 24–48 hours (depending on the model).

In Gorenje refrigerators with the DynamicCool function, activating SuperCool or SuperFrost may temporarily disable air circulation in the freshness zone (if there is one). intervention.

⚠️ Attention: Do not use the SuperCool and SuperFrost modes at the same time - this will create an excessive load on the compressor and may trigger overheating protection.

If you need to freeze a large amount of food (for example, crops) berries), it is better to do this in several stages, loading the freezer in parts. This will help to avoid a sharp increase in temperature and overloading the system.

What to do if SuperFrost does not turn off automatically?

If the SuperFrost mode continues to operate for more than 48 hours, this may indicate a malfunction of the control board or temperature sensor. If this does not help, unplug the refrigerator for 10 minutes. If the problem persists, contact the service center.

Diagnostics of problems: the refrigerator does not hold the temperature

If, after setting, the temperature in the refrigerator Gorenje does not correspond to the specified parameters, this may be caused by several reasons. Before contacting the service center, perform the repair yourself. diagnostics:

• 🔍 Check the door seals: over time, they may lose elasticity. Carry out a test with a sheet of paper - if it is easily pulled out from under the closed door, the seal requires replacement.
• 🧊 Estimate the amount of ice: in models with a drip system, a thick layer of ice on the back wall may indicate a malfunction. thermostat or sensor.
• 🌀 Listen to the operation of the fan: in refrigerators with NoFrost the absence of fan noise may indicate its breakdown.
• 🔌 Check the network voltage: low voltage (less than 200 V) may lead to incorrect operation of the compressor.

If the refrigerator Gorenje does not cool at all, follow these steps:

1. Disconnect the refrigerator from the network for 10-15 minutes, then turn it on again. will reset possible control board errors.
2. Check whether the power indicator is on. If not, the problem may be in the power filter or cord.
3. Listen to the operation of the compressor (it is located at the bottom of the refrigerator at the back), this indicates a malfunction.

In models with electronically controlled errors are displayed on the display. Interpretation of the most common codes:

• E1 — malfunction of the temperature sensor of the refrigerator compartment.
• E2 —problem with the freezer compartment sensor.
• E4 —malfunction of the defrost system (for models with NoFrost).
• E5 —communication error between the boards controls.

⚠️ Attention: If the refrigerator Gorenje with the system NoFrost starts to make a lot of noise and does not cool, the fan may be jammed. Do not try to disassemble the refrigerator yourself - this may damage the evaporator.

If after diagnosis the problem does not exist. is resolved, contact an authorized service center Gorenje. When contacting, check the refrigerator model (it is indicated on the sticker inside the chamber or on the back wall) and the error code (if displayed). This will help the technician quickly determine the cause of the problem.

FAQ: Frequently asked questions about setting the temperature in Gorenje refrigerators

How to reset temperature settings to factory settings?

In most electronic models Gorenje the reset is performed by holding the button SuperCool and SuperFrost simultaneously for 5 seconds. In mechanical models, it is enough to set both regulators to the position 3 (average value).

Why does ice form on the back wall of the freezer in the Gorenje refrigerator with NoFrost?

This may be caused by a malfunction of the evaporator heater or defrost sensor. Also check if food is blocking the vents. If ice appears regularly, contact a service center - the system parts may need to be replaced. NoFrost.

What temperature should be in the freshness zone (0°C)?

The optimal temperature for the freshness zone is from 0°C to +1°C. In refrigerators Gorenje this zone is usually designated as FreshZone or BioFresh and has a separate regulator (in electronic models) or a fixed temperature.

Is it possible to turn off the refrigerator Gorenje at night to save energy?

It is not recommended to turn off the refrigerator at night. This will result in food defrosting and increased energy consumption during re-cooling. Modern refrigerators Gorenje consume little energy in standby mode (about 0.5–1 kWh per day).

How often do you need to defrost a Gorenje refrigerator with a drip system?

Refrigerators with a drip defrosting system (for example, Gorenje RK 4181) It is recommended to defrost 1-2 times a year. If ice more than 5 mm thick forms on the back wall, defrosting should be carried out unscheduled.