When planning the delivery of large household appliances or preparing space in the kitchen, the weight of the unit becomes one of the key parameters. The question how much does an Indesit refrigerator weighoften arises among buyers who are going to bring the device into the apartment themselves or are calculating the load on the floor in old houses. The answer to this cannot be unambiguous, since the dimensions and internal content significantly affect the final figures.
The average weight of a two-chamber refrigerator from an Italian brand varies over a wide range, depending on the height of the case, the presence of the No Frost system and the number of compressors. Lightweight models up to 150 cm in height can weigh about 40 kg, while massive premium devices reach 70-80 kg or more. Understanding these differences is critical for safe transportation installation.
In this article we will take a detailed look at what the weight of equipment depends on, provide specific data on popular series and give recommendations for moving heavy equipment. You will learn how to correctly calculate the load and why knowing the exact weight is necessary not only for loaders, but also for the owners themselves when choosing an installation location.
Factors influencing the weight of refrigeration equipment
The main determining factor how much does an Indesit refrigerator weighis its useful volume and overall dimensions. Obviously, a model with a height of two meters will be heavier than the compact version, which is usually installed under a tabletop or in a niche. An increase in volume requires more metal for the body, more plastic for the internal shelves and, most importantly, more refrigerant and insulating materials.
The second important parameter is the type of defrosting system. Devices with manual defrosting or a drip system (Full No Frost is less common in budget models, but is gaining popularity) have different evaporator designs. The presence of fans, additional heating elements and a more complex air duct system in models with technology No Frost adds several kilograms to the total weight.
⚠️ Attention: The weight of an empty refrigerator and the weight of the device in operating condition may differ. Glass shelves, containers for vegetables and other accessories can be added inside, which are not always taken into account in the basic specifications on the store’s website.
The number of compressors also affects the weight. Single-compressor models, which are standard for most modern Indesit refrigerators, are lighter than their two-compressor counterparts. The last factor is finishing materials. Having a metal door instead of painted enamel or using tempered glass for shelves also contributes to the bottom line.
Weight of Indesit refrigerators by series and models
To give an accurate answer to the question about weight, it is necessary to consider specific product lines. The Indesit brand offers a wide range of models, and the difference in weight between them can be significant. Below is data based on technical data sheets of the most common series.
Series Indesit DF (combined refrigerators) is one of the most popular. These models are often equipped with a No Frost system in the freezer. Their weight usually starts from 55 kg for medium-height models and reaches 65-68 kg for high versions. The presence of an inverter compressor in some modifications may also slightly increase the weight due to the design features of the engine.
More compact series, such as Indesit DS or TT, designed for small kitchens, weigh significantly less. Their weight range is from 35 to 45 kg. This makes them more convenient for rearranging by one person, although manufacturers still recommend involving assistants.
| Series / Model | Height (cm) | Type of defrosting | Net weight (kg) |
|---|---|---|---|
| Indesit DS 167 | 167 | Drip / Manual | 46 |
| Indesit DF 5180 | 185 | No Frost / Drip | 62 |
| Indesit EF 18 | 185 | No Frost | 64 |
| Indesit TT 85 T | 85 | Static | 32 |
It is important to note that the gross weight (in packaging) will always be greater than the net weight. The cardboard box, foam pads and fasteners add another 5 to 10 kg to the total weight. This must be taken into account when ordering the services of loaders or planning the lifting capacity of the elevator.
Specifics of built-in models and their dimensions
Built-in equipment has its own design features, which directly affects its weight. The body of such refrigerators is devoid of decorative external decoration, which theoretically should make them lighter. However, the presence of special fasteners, reinforced hinges for hanging furniture facades and denser insulation to minimize noise often compensates for the lack of an outer shell.
Series models Indesit INC are a striking example of built-in technology. Their weight usually varies between 50-60 kg depending on the height of the niche (standard 177 cm or 144 cm). When calculating the load on a kitchen shelf, it is necessary to take into account not only the weight of the unit itself, but also the weight of the products that will be stored in it, as well as the weight of the curtain wall.
Features of fastening built-in models
Built-in refrigerators are attached to the furniture frame through special slides or guides. This requires a perfectly flat floor surface inside the niche, since misalignment can lead to jamming of the door and increased load on the hinges.
When installing a built-in device, it is extremely important to comply with ventilation requirements, since a dense environment with furniture requires effective heat removal. Incorrect installation can lead to overheating of the compressor, which in such models often works with increased load.
Nuances of transportation and lifting to the floor
Knowing how much does the Indesit refrigerator weighyou can correctly plan its movement. If the device weighs more than 40 kg, manufacturers strongly recommend transporting it with two people. This is connected not only with convenience, but also with safety: a sharp jerk or tilt of a heavy unit can lead to a back injury or damage to the refrigerator itself.
When climbing stairs without an elevator, you must take into account that the center of gravity for tall models is shifted upward. This makes them unstable when carried in a stack. It is recommended to use special heavy-duty belts or crawler carts that allow one person to lift loads weighing up to 100 kg on steps.
⚠️ Attention: It is strictly forbidden to tilt a refrigerator that is running or has just been turned off by more than 40 degrees. Oil from the compressor may enter the cooling circuit, which will lead to clogging of the capillary tube and failure of the unit.
If you order delivery from a store, check whether the service includes lifting to the floor. Often, couriers deliver goods only to the front door of the apartment (“to the entrance” or “to the elevator”), and for climbing the stairs there is a separate fee, depending on the number of floors and the weight of the cargo.
☑️ Check before lifting the refrigerator
Calculation of the load on the floor and installation
For most standard apartments in multi-storey buildings, the issue of floor load is not acute, since the floors are designed for significantly larger weights. However, owners of private houses with wooden floors or residents of old buildings ("Stalinka", "Khrushchev") should be careful. The point load from the four legs of the refrigerator can be significant.
To calculate the pressure on the floor, you need to divide the weight of the refrigerator (plus the weight of the food, approximately 30-50 kg) by the area of support of the legs. If the floor is wooden and is in doubt, it is recommended to install the device on a wider stand or redistribute the load by placing the refrigerator closer to the load-bearing wall.
Installation should be done on a flat, hard surface. The use of soft rugs or linoleum with long pile is unacceptable, as this interferes with the ventilation of the lower part of the case and can lead to deformation of the bottom of the unit under its own weight.
Comparison with competitors and the impact of configuration
Comparing Indesit equipment with other brands, you can see that Italian engineers often rely on the optimal ratio of weight and strength. Indesit refrigerators tend to be a little lighter than some models from premium competitors (for example, Liebherr or Bosch), which use thicker steel and complex multi-flow cooling systems.
However, they are among the most reliable in their price segment. Equipment also plays a role: models with a door display, ice maker or freshness zone will be heavier than the basic versions. When choosing, pay attention to the technical data sheet, which indicates the net weight - this figure is the most accurate for calculations.
It is also worth considering that new models may differ in weight from those that were produced 5-7 years ago, even with the same volume. This is due to changes in insulation production technologies and the use of new alloys in heat exchangers.
Frequently asked questions (FAQ)
Is it possible to transport Indesit refrigerator lying down?
Transportation in a lying position is not recommended, but is possible over short distances if strict rules are followed. The unit can only be placed on its side (usually the right one when looking at the door from the front, but it is better to check the instructions for the specific model) and in no case on the back or front panel. After transportation in a horizontal position, the refrigerator must stand vertically for at least 4-6 hours before turning it on, so that the oil flows back into the compressor.
Why may the weight in the store and in the instructions differ?
A difference of 1-3 kg may be caused by rounding of data by the manufacturer, the use of different batches of components (for example, glass shelves may be slightly thicker or thinner) or the availability packaging materials. The gross weight always includes the box and foam, so it is always greater than the net weight specified in the specifications.
Do you need to remove the doors when lifting the refrigerator up a narrow ladder?
Removing the doors is a standard procedure for reducing size and weight when passing through narrow spaces. However, it is not recommended to do this yourself without experience, as you may damage the hinges or the latch mechanism. If you are not confident in your abilities, it is better to entrust this operation to professional movers.
Will the floor on the balcony withstand an Indesit refrigerator?
Standard balconies in panel houses are designed for a certain load (usually about 200 kg/sq.m). The weight of one refrigerator (about 60 kg) distributed over four support points is usually safe. However, if the balcony is old, has damage, or you plan to place several heavy objects there, you need to consult an engineer or check the condition of the structures.