Push Cool function in Indesit refrigerators: purpose, principle of operation and operating tips

You only that you bought a refrigerator Indesit with a mysterious button Push Cool and don’t understand why it is needed? Or have you noticed that your old unit has become worse at cooling, and this same indicator is blinking on the panel? Do not rush to panic - this function is not a signal of failure, but, on the contrary, is designed to improve the performance of the equipment. In modern models Indesit (for example, Indesit ITF 118 W or Indesit BIAA 13) Push Cool plays an important role in maintaining the optimal temperature, especially when you need to quickly cool a large number of products.

Many users mistakenly believe that Push Cool is an analogue of the mode “Super freezing” or “Quick cooling”, but in fact its tasks are somewhat different. This function activates forced circulation of cold air in the main chamber, which allows you to evenly distribute the temperature and avoid “warm zones”. This is especially useful in the summer or after loading a large volume of warm products (for example, after shopping in a supermarket). when it is better to do without it so as not to overload the compressor. Push Cool, when it should be turned on, and when it is better to do without it, so as not to overload the compressor.

What is Push Cool: technical explanation

Function Push Cool (literally - “push the cold”) - this is a proprietary technology Indesit, designed for intensive cooling of the main chamber of the refrigerator. Unlike the standard mode, where the cold is distributed naturally (due to convection), a fan is used here, which actively “drives” air through the evaporator. This allows:

• 🔹 Quickly reduce the temperature after loading warm foods (for example, a pot of soup or just cooked dishes).
• 🔹 Prevent the formation of condensation on the walls and shelves, which is especially important for models with the system No Frost.
• 🔹 Maintain uniform cooling in all zones of the chamber, avoiding temperature changes (for example, when on the top shelf +5°C, and on the bottom +8°C).

Technically Push Cool it works like this: when the function is activated, the fan is turned on (if it is in the model) and the compressor power is temporarily increased. In refrigerators without No Frost (for example, Indesit BIA 10) an alternative mechanism can be used - increased operation of the evaporator. this not a permanent mode, but a temporary solution for emergency situations. Long-term use Push Cool can lead to:

• ⚡ Increased energy consumption (15-20% higher than standard).
• ❄️ Excessive freezing of the evaporator in models without No Frost.
• 🔊 Increased noise due to fan operation at maximum speed.

Differences between Push Cool and Super Cool and Fast Freeze modes

Many are confused Push Cool with other intensive cooling functions, such as Super Cool or Fast FreezeHowever, they have different tasks and principles of operation. Let's compare:

The key difference Push Cool is air circulationand not just a decrease in temperature. For example, if you put a warm cake in the refrigerator, Super Cool it will cool it slowly, due to a general decrease in temperature in the chamber, and Push Cool will quickly “blow” it with cold air, preventing damage. However it is not recommended to use both functions simultaneously this creates excess load on the compressor.

⚠️ Attention: B refrigerators Indesit with a system Total No Frost (for example, Indesit ITF 119 W), the function Push Cool can automatically turn off after 1 hour, even if the indicator continues to light. This is normal - this is how overload protection works.

When to enable Push Cool: practical cases

The function Push Cool is not intended for permanent use. It should be activated in the following situations:

• 🛒 After large purchases: if you have loaded a large amount of warm food into the refrigerator. (meat, milk, ready meals). Turn on Push Cool for 1–1.5 hours to quickly stabilize the temperature.
• ☀️ In hot weather: in the summer, when the temperature in the kitchen exceeds +28°C, the refrigerator works with increased load. Push Cool will help. compensate for heat inflows when opening the door.
• 🍰 For cooling baked goods or desserts: if you need to quickly cool a cake, cream or other perishable products, the function will speed up the process without the risk of condensation.
• 🧊 After defrosting: if you defrosted the refrigerator Push Cool will help restore the operating mode faster.

But in what cases is not worth use this function:

• ❄️ If the refrigerator is already set to the minimum temperature (+2°C), additional cooling can lead to freezing of food.
• 🔌 If the voltage in the network is unstable, sudden surges can damage the compressor operating in enhanced mode.
• 🕒 At night, if the refrigerator is standing. bedroom. The noise of the fan can interfere with sleep.

Advice: if you often use Push Cool in the summer, check whether the refrigerator is located next to the stove or radiator. Indesit recommends maintaining a gap of at least 5 cm from the sources heat, otherwise the function will operate too often, increasing the wear of the equipment.

How to properly turn on and off Push Cool

The process of activating the function depends on the refrigerator model. In most cases, it is enough to press the button Push Cool on the control panel (usually it is highlighted in blue or green, however, in some models). (for example, Indesit BIAA 13 P) you may need to hold the button for 2-3 seconds. Here are step-by-step instructions:

1. Make sure the refrigerator door is tightly closed.
2. Find the button Push Cool (it may be indicated by a snowflake with an arrow or inscription PUSH).
3. Press the button once. The indicator should light up or start flashing.
4. Wait 30-60 minutes. The function will turn off automatically, or you can do it manually by pressing again.

If the indicator Push Cool flashes, but the refrigerator does not cool more than usual, the following reasons are possible:

• 🔌 Fan malfunction (valid for models with No Frost).
• ❄️ Evaporator freezing — defrosting is required.
• 🔋 Failure in the electronic module (diagnostics needed).

⚠️ Attention: If after activation Push Cool refrigerator begins to make loud noise or vibration, immediately turn off the function and check whether the back of the furniture or wall is touching the fan, which may cause damage.

What to do if Push Cool does not turn off automatically?

If the function operates for more than 2 hours, this may indicate a malfunction of the thermostat or control board. Try unplugging the refrigerator for 10 minutes, then turn it on again. If the problem persists, contact a service center. Repairing electronic components yourself may void the warranty.

The effect of Push Cool on the energy consumption and service life of the refrigerator

Many users are afraid that frequent use data-i="176">will lead to an increase in electricity bills or reduce the life of the compressor. Let's figure out how justified these fears are. Push Cool will lead to increased electricity bills or shorten the life of the compressor. Let's figure out how justified these fears are.

According to Indesitactivation Push Cool increases energy consumption by 15–20% per hour of operation. comparison:

• 💡 Standard mode: ~1 kWh per day (for class A+).
• 🔥 Push Cool (1 hour): +0.15–0.2 kWh.
• ❄️ Fast Freeze (1 hour): +0.25–0.3 kWh.

Thus, a one-time activation of the function will cost you approximately 10–15 kopecks (according to 2026 tariffs). However, if you use Push Cool daily for 2 hours, you will earn ~15–20 rubles in a month, and up to 200–250 rubles in a year. This is not critical, but it is worth considering for intensive use.

As for the wear and tear of equipment, it is important to observe the measure:

• ✅ Safe: 2-3 times a week for 1 hour.
• ⚠️ Risky: daily use 2+ hours.
• ❌ Dangerous: leaving the function on all night.

The main load comes on compressor i fan. In models without No Frost (for example, Indesit B 18), frequent activation Push Cool can accelerate the formation of ice on the evaporator, which will require more frequent defrosting. In refrigerators with Total No Frost the risk is less, but still should not be abused. function.

Common problems. with Push Cool and their solutions

Sometimes the function Push Cool does not work correctly. Let's look at typical faults and ways to fix them:

If, after pressing the button Push Cool the refrigerator begins to make clicks or hum, this may indicate:

• 🔌 Problems with the start relay compressor.
• ❄️ Freezing of pipes evaporator (defrost required).
• 🔋 Unstable voltage in the network (check through the stabilizer).

⚠️ Attention: If after activation Push Cool the refrigerator turns off after 5-10 seconds, this may be a sign compressor overheatingDo not turn on the function again - let the appliance cool for 1-2 hours.

Push Cool alternatives in refrigerators of other brands

Function Push Cool is a unique development Indesit, but Other manufacturers have similar technologies. If you are considering purchasing a refrigerator from another brand, pay attention to the following analogues:

• 🔹 Samsung: Power Cool — intensive cooling with a fan.
• 🔹 LG: Express Cool — quick temperature drop in 10 minutes.
• 🔹 Bosch: SuperCool — cooling to +2°C with automatic shutdown after 6 hours.
• 🔹 Atlant: Turbo Cool —forced air circulation.

The main difference Push Cool from competitors is emphasis on air circulation, and not just lowering the temperature. For example, Power Cool from Samsung stronger. cools, but can lead to freezing of food on the back wall, while Push Cool distributes the cold more evenly.

If you are choosing between models, pay attention to:

• 📊 Energy efficiency: refrigerators Indesit s Push Cool usually belong to class A+ or A++, which is more economical than SuperCool u Bosch (class A).
• 🔊 Noise level: the fan in Push Cool is quieter than in Express Cool from LG.
• ❄️ Defrosting system: in models with Total No Frost the function is less effective than in drip refrigerators.

FAQ: Frequently asked questions about the Push Cool function

Can Push Cool be turned on all night?

No, this is not recommended. energy consumption. If you need to maintain a low temperature all night, it is better to set the standard mode to +2°C.

Why does condensation form in the refrigerator after Push Cool?

This can happen in models without No Frost, if the function is activated when the humidity in the chamber is high. To avoid condensation, before turning on Push Cool Wipe the walls with a dry cloth and make sure that the food is well packaged (especially fruits and vegetables).

Can Push Cool be used together with Super Cool?

Technically yes, but this creates excess load on the system. Super Cool already reduces the temperature to a minimum, and Push Cool increases circulation. Shared use can lead to freezing of the evaporator or activation of the compressor protection. It is better to choose one function depending on the task.

How often can Push Cool be turned on?

The optimal frequency is 2-3 times a week for 30-60 minutes. Daily use is only permissible in the hot season, but not longer than 1 hour at a time. If you notice that the refrigerator has become worse in cooling without Push Coolcheck the door seal or call a technician for diagnostics.

Is there Push Cool in the freezer?

No, this function only works in the freezer. refrigerator compartment. For the freezer compartment, models Indesit have a separate mode - Fast Freeze, which is designed for quick freezing of food.