When choosing refrigerator Indesit height 185 cm many are faced with the question of its weight - this is critical for planning delivery, checking the strength of the floor, or even choosing an installation location. Two-chamber models of this brand are popular due to the optimal ratio of price and functionality, but their weight can vary depending on chamber volume, type compressor, shelf material and the presence of a system No Frost.
In this article we will look at what determines the weight of refrigerators Indesit height 185 cm, provide accurate data on popular models and give practical recommendations for their transportation and installation. We will pay special attention nuancesthat are often forgotten: for example, how weight affects the stability of the device or why some models seem “lighter” than competitors with similar dimensions.
If you are planning to purchase or have already purchased a refrigerator, but are not sure whether your floor will support its weight (especially true for houses with wooden floors), here you will find answers to all questions - from technical characteristics to installation tips.
Why the weight of a refrigerator is important: 5 key reasons
The weight of a refrigerator is not just a number on a technical data sheet. It affects many practical aspects that are worth thinking about before purchasing:
- 📦 Logistics and delivery: Weight determines the cost of transportation, the number of movers and even the type of vehicle. For example, a refrigerator weighing 70+ kg will require special mounting in a car or a freight elevator in an apartment building.
- 🏠 Floor strength: In old houses or on balconies (if installation is planned there), the maximum load per 1 m² may be limited. A refrigerator weighing 80 kg creates a point load that not all floors can withstand.
- 🔧 Installation and moving: To move the refrigerator from its place or level it, you may need 2-3 people. Models with a weight more than 75 kg almost impossible to move alone.
- ⚡ Operational stability: Heavy refrigerators vibrate less when the compressor is running, which reduces noise and the risk of displacement. Light models (for example, less than 60 kg) can “walk” when the doors are opened.
- ♻️ Disposal: When replacing an old refrigerator, the weight affects the cost of removal and disposal. In some regions, tariffs depend on the weight of equipment.
In addition, weight indirectly signals about quality of materials. For example, thick walls and metal parts increase mass but improve thermal insulation and durability. At the same time, an excessively light refrigerator may turn out to be less reliable.
What determines the weight of the refrigerator Indesit 185 cm
The mass of the refrigerator is formed from several components. Let's look at the key factors that make one model heavier than another at the same height 185 cm:
1. Type of defrosting system:
- ❄️ No Frost: Refrigerators with this system weigh by 5–10 kg more due to additional fans and evaporators. For example, the model Indesit DF 4180 W (No Frost) weighs 72 kg, while the one similar in volume Indesit BIAA 13 (drip system) weighs 65 kg.
- 💧 Drip defrosting: Lighter design, but requires manual removal of ice in the freezer.
2. Material of shelves and door compartments:
- 🥛 Glass shelves: Increase weight by 3–7 kg, but withstand heavy loads (up to 25 kg per shelf).
- 🧊 Plastic shelves: Lighter, but less durable (maximum 10–15 kg per shelf).
- 🔄 Drawers: Metal guides add 1–2 kg to the total mass.
3. Compressor and refrigerant:
- ⚙️ Inverter compressor: Lighter than traditional one 2–3 kg, but more expensive to repair.
- ❄️ Refrigerant volume: In models with a large volume of chambers (for example, 300+ liters) more freon is used, which adds 1–1.5 kg.
4. Additional functions:
- 🔋 Display and electronic control: Increase weight by 1–2 kg.
- 🔊 Sound alarm: Speaker and sensors add 0.3–0.5 kg.
- 🌡️ Freshness zone: An additional chamber with separate cooling can make the refrigerator heavier by 3–5 kg.
Weight of popular models Indesit 185 cm: comparison table
Below is updated information on the mass of the most popular two-chamber refrigerators Indesit height 185 cm. Data are taken from official technical data sheets and may vary slightly depending on the year of manufacture.
| Model | Defrost type | Total volume (l) | Weight (kg) | Features |
|---|---|---|---|---|
| Indesit DF 4180 W | No Frost | 325 | 72 | Electronic control, display, freshness zone |
| Indesit BIAA 13 | Drip | 296 | 65 | Mechanical control, 4 shelves in the refrigerator compartment |
| Indesit ITF 118 W | No Frost | 310 | 68 | Inverter compressor, low noise level (39 dB). but they simplify care. |
| Indesit BIA 18 | Drip | 285 | 62 | Budget model, plastic shelves |
| Indesit DFE 4180 W | No Frost | 330 | 74 | Double cooling system, antibacterial coating |
Models with the No Frost system weigh on average 7-10 kg more than their counterparts with drip defrosting for the same volume. This is due to additional fans and evaporators, which take up some of the internal space, but simplify maintenance.
If you need the lightest possible model, pay attention to Indesit BIA 18 (62 kg) or Indesit BIAA 13 (65 kg). However, remember that drip defrosting requires regular defrosting of the freezer (once every 6–12 months).
How to properly transport a heavy refrigerator
Transporting a refrigerator in bulk 60–80 kg —a task that requires preparation. Errors can result in compressor damage, housing deformation, or even personal injury. Here are step-by-step instructions:
Pack all shelves and drawers separately (use bubble wrap)
Secure the doors with tape or special belts
Unplug the refrigerator within 12 hours before transportation
Check the reliability of the compressor fastening (it should not dangle)-->
1. Selection of transport:
- 🚗 Passenger car: Suitable only for models weighing up to 65 kg (for example Indesit BIA 18). The refrigerator is transported in a vertical position, secured with belts.
- 🚐 Gazelle or van: Optimal for models 70–80 kg. The refrigerator is laid on its side (but not on the door!) and secured with wooden blocks.
- 🚛 Freight elevator: If the weight exceeds 80 kg, special equipment may be required for lifting.
2. Correct position for transportation:
- ✅ Vertical: Ideal option, but requires reliable fixation.
- ⚠️ On its side: Acceptable if the compressor is rigidly fixed. Cannot be placed on the door - this will lead to deformation hinges!
- ❌ Upside down: Strictly prohibited - risk of damage to the refrigerant pipes.
3. Unloading and installation:
- 🏋️ Use belts or hand trucks for heavier models 70 kg.
- 📏 After installation, check the level of the refrigerator - misalignment more 2° degrades the performance of the compressor.
- ⏳ Do not turn on the refrigerator immediately after delivery! Wait 2–4 hours (in winter - 6–8 hours) for the refrigerant to be distributed evenly.
⚠️ Attention: If the refrigerator was transported lying down, let it cool before turning it on. stand upright at least 12 hours. Otherwise, the compressor may fail due to oil getting into the cooling circuit.
The weight of the refrigerator and the strength of the floor: what you need to know
In apartment buildings, standard reinforced concrete floors can withstand load 200–400 kg/m², but in private houses or on balconies this figure may be lower. Here's how to calculate safety:
1. Load distribution:
- 📏 Refrigerator height 185 cm usually has a support area 0.5–0.6 m² (for example, 60×60 cm).
- ⚖️ Weight 70 kg on the area 0.5 m² creates a load 140 kg/m² —this is safe for most floors.
- ❗ If the weight exceeds 100 kg, check the load-bearing capacity of the floor (especially on the second floor of a private house).
2. Additional risks:
- 🌊 Vibration: When the compressor is running, the refrigerator may move. On slippery tiles, use anti-slip pads.
- 💦 Humidity: In wooden houses, high weight + condensation can lead to rotting of the floor. A waterproofing underlay is recommended.
- 🔌 Electrical wiring: Make sure the outlet can handle the load (refrigerators Indesit consume 100–150 W, but the inrush current can reach 1–1.5 kW).
⚠️ Attention: In houses with wooden floors (for example, in Stalin buildings or wooden cottages), the maximum load can be 150 kg/m². A refrigerator weighing 80 kg in this case, it is better to install it on a reinforced base (for example, a metal sheet 5–10 mm).
If you doubt the strength of the floor, use distribution plate (for example, thick plywood 18–20 mm) to increase the support area.
How to reduce the weight of a refrigerator before moving
If you need to move the refrigerator manually or lighten the load on the floor, you can temporarily reduce its weight. Here are proven methods:
- 🧊 Remove all removable elements:
- Shelves (the weight of each is 1–3 kg).
- Boxes for vegetables (2–4 kg).
- Door compartments (0.5–1.5 kg each).
- ❄️ Thaw and dry:
- Ice in the freezer can add 3–5 kg to the total weight.
- After defrosting, wipe the chambers dry - moisture increases weight.
- 🔧 Remove the back cover (only for experienced users!):
- This will remove dust from the capacitor (up to 0.5 kg).
- Do not touch the refrigerant pipes - their damage will lead to leakage freon!
For example, a refrigerator Indesit DF 4180 W weighs 72 kg after removing the shelves, drawers and defrosting, its weight will decrease to 60–62 kg, which will simplify transportation.
What happens if you transport a refrigerator with freon upside down?
When turning the refrigerator over, oil from the compressor may get into the cooling circuit. This is. will lead to blockage of the capillary tube and compressor breakdown when first turned on, repairs will cost 50–70% of the cost of a new refrigerator.
Common mistakes when choosing a refrigerator by weight
Many buyers pay attention only to dimensions and volume, forgetting about weight. Here are typical mistakes and their consequences:
- 🏗️ Ignoring weight when installing on the second floor:
The refrigerator 75+ kg may fall through weakened wooden floors. floor capacity before purchase.
- 🚪 Choosing a model with No Frost for a summer residence without taking into account weight:
Such refrigerators are heavier and require stable voltage In conditions of power outages, it is better to take a drip model (for example, Indesit BIA 18 — 62 kg).
- 🔄 Attempting to move the refrigerator alone:
Models weighing more than 65 kg are almost impossible to move without help. Use belts with handles or a cart.
- ♻️ Unaccounted weight during disposal:
In some regions, the cost of removal of equipment depends on the weight of a refrigerator 80 kg can cost 1.5–2 times more expensivethan. model 60 kg.
To avoid problems, always check with technical data sheet the weight is indicated in the section Technical characteristics or on a sticker on the back of the refrigerator.
⚠️ Attention: If you buy a refrigerator in an online store, check weight in the package - it may be on 5–10 kg more due to the box and polystyrene. For example, Indesit DF 4180 W weighs 72 kg, but in the package - 78 kg.
FAQ: Answers to frequently asked questions about the weight of refrigerators Indesit
🔍 Why are refrigerators Indesit with No Frost heavier drip?
The No Frost system includes fans, additional evaporators and air ducts, which increase the weight by 5–10 kgIn addition, such models usually have thicker thermal insulation for uniform distribution of cold air.
🏋️ Is it possible to transport a refrigerator weighing 75 kg in a passenger car?
Technically, yes, but only in a vertical position and with reliable fixation. Optimally used SUV or station wagon If the refrigerator does not fit in height, it can be transported lying on its side (not on the door!), but. then you need to wait 12 hours before turning it on.
📏 What kind of refrigerator Indesit 185 cm is the lightest?
Among two-chamber models with a height of 185 cm, the minimum weight is Indesit BIA 18 — 62 kg. This is a model with drip defrosting, mechanical control and plastic shelves. The next lightest is Indesit BIAA 13 (65 kg).
🔧 Does the weight of the refrigerator affect the noise level?
Indirectly yes. Heavier models (for example, with No Frost) usually have better sound insulation and are more stable on the floor, which reduces vibration. Light refrigerators (less than 65 kg) can “rattle” more when the compressor is running, especially if the floor is uneven.
♻️ How to dispose of a heavy refrigerator?
In most regions of Russia there are programs for acceptance of old technology. Weight affects the cost of export:
- Up to 70 kg: 500–1000 rubles (depending on the region).
- Over 70 kg: 1000–1500 rubles + possible surcharge for dismantling freon.
Check details at local recycling services or in the store when purchasing a new refrigerator (many offer a discount for returning the old one).