How to properly turn on the cold in an Indesit refrigerator: instructions for all models

The refrigerator Indesit doesn’t start cooling after connecting to the network? Or have you just bought a new model and don't know how to activate the freeze mode? In this article we will look at all the ways to turn on the cold - from basic mechanical regulators to electronic panels with a display. We took into account the features of popular series Indesit (for example, C 167 NF, TLAA 10, BIA 18), as well as typical errors due to which the refrigerator may not start.

It is important to understand: the startup process depends on the type of control of your model. Older refrigerators (before 2015) usually have a physical regulator with positions 0–5 or Min–Max, and new ones (2018–2026) have touch buttons or a display with a menu. If you are not sure about the model, look at the label on the inside of the camera or on the back panel. The series and year of manufacture are indicated there.

Before proceeding with the settings, make sure that the refrigerator is connected to a grounded outlet and the voltage in the network is stable (from 200 V to 240 V). Power surges - one of the main reasons why the appliance Indesit does not turn on or resets settings.

1. Basic method: turning on the cold with a mechanical regulator

If your refrigerator Indesit is equipped round pen with numbers (for example, model Indesit ST 167 or Indesit B 18), the algorithm is simple:

1. Check the network connection. Make sure that the plug is firmly inserted into the socket and the power indicator on the control panel is on (if there is one).
2. Find the temperature regulator. It is usually located inside the refrigerator compartment on the right wall or on top.
3. Turn the knob clockwise to position 1–2 (for moderate cooling) or 3–4 (for intensive position 0 or Off means that the refrigerator is turned off.

After turning the knob, you should hear a click of the relay and a slight whirring of the compressor. If there is no sound, check:

• 🔌 Voltage in the socket (use a tester or connect it. another device).
• ❄️ Refrigerator door —it must be tightly closed, otherwise the sensor will not give a command to start.
• ⚡ ThermostatIf the handle rotates too easily or does not lock in position, damage is possible (needed). repair).

Door closure tightness|Voltage in the socket (200–240 V)|Position of the regulator (not at "0")|No errors on the display (if any)|The sound of the operating compressor -->

First cooling time depends on the volume of the chamber and the temperature in room. On average, the refrigerator Indesit reaches operating mode in 2–4 hours. If after 6 hours the chamber is still warm, it means there is a malfunction (read the section about errors).

2. Electronic control: buttons and display

In models with an electronic panel (for example, Indesit EWD 81052 or Indesit ITF 118), the cold is turned on through the menu: Algorithm:

1. Press the button Power or On/Off (usually it is highlighted in green).
2. Using the buttons +/– or Temp set the target temperature:
   • For the refrigerator compartment: +4…+6°C.
   • For the freezer cameras: –18…–24°C.

Press OK or Set to save.

The display will show the current and target temperature If after setting the indicator flashes Alarm or Error, this means that the system has detected a problem (see error table below).

What to do if the buttons do not respond?

If the panel does not respond to presses, try:

1. Disconnect the refrigerator from the network for 10 minutes (full reset).

2. Check if the buttons are blocked (some models have a function Child Lock - look for the 🔒 icon).

3. Inspect the panel contacts - possible oxidation or moisture ingress.

Feature of models with No Frost: after turning on, the fan can work. 10–15 minutes without stopping - this is normal. The system pumps cold air through the chambers.

3. “Super Freeze” and “Super Cooling” modes

If you need to quickly freeze food or cool a large volume (for example, after loading warm dishes), use enhanced modes:

• 🥶 Super Freeze (for the freezer): the temperature drops to –26…–30°C on 24–72 hours, then returns to normal –18°C.
• ❄️ Super Cool (for the refrigerator compartment): cooling to +2°C within 6–12 hours.

How to activate:

1. On mechanical models: turn the knob to position Max or Super.
2. On electronic ones: find the button Super (may be indicated by a snowflake ❄️) and hold it 3 seconds.

Important: do not hold “Super freezing” for longer than 72 hours - this increases the load on the compressor and energy consumption by 30–40%.

4. cold

The refrigerator Indesit does not cool, although everything is connected correctly? Check these points:

If after checking all the points the refrigerator still does not work, do not try to disassemble it yourself — systems Indesit use refrigerant R600a (isobutane), which is explosive if mishandled.

Mechanical (knob-regulator)|Electronic (buttons)|Electronic with display|I don’t know-->

5. What to do if the refrigerator turns on, but does not cool?

Situation: the compressor is humming, the light inside is on, but the temperature does not drop. The reasons may be different:

• 🔧 Clogged capillary tube (the refrigerant is not working). circulates).
• 🌡️ Thermostat malfunction (does not give a signal to turn on the cooling).
• ⚡ Problems with starting relay (the compressor works at half capacity).
• 🧊 Freon leak (refilling required).

For diagnostics:

1. Touch the compressor (black cylinder at the back of the refrigerator). If it is cold, it does not work. If it is hot, but there is no cold, it is possible. leak.
2. Listen to the sound: normal operation - uniform humming. Clicks every 5-10 seconds they talk about a relay malfunction.

For models with No Frost system check the fan (it should spin when the door is open). If the blades stand still, a winding break or ice freezing on the evaporator is possible.

6. Turning on the refrigerator after defrosting or transportation

After defrosting or transportation, the refrigerator Indesit cannot be turned on immediately. Rules:

• ⏳ After defrosting: wait 1–2 hoursso that the moisture evaporates from the evaporator.
• 🚛 After transportation (especially lying down): stand 4–6 hours in a vertical position. This is necessary so that the oil from the compressor flows back.

If you ignore this rule, the compressor may jam due to running dry. The warranty does not apply to such a case - this is considered a violation of the rules operation.

After switching on:

1. Set the regulator to the middle position (2–3).
2. Close the door and do not open 1–2 hours.
3. Check the temperature after 4-5 hours in the freezer (there should be at least –10°C).

7. Frequently asked questions about turning on the cold in Indesit

Is it possible to turn on the refrigerator immediately after delivery?

No. If the refrigerator was transported in a horizontal position (lying down), it must be held vertically 4–6 hours if it was transported standing up, it is enough 1–2 hours. This is necessary so that the oil from the compressor returns to the lower part of the system.

Why, after turning on, the refrigerator does not cool, but the compressor is hot?

Probable reasons:

1. Freon leak — the compressor is idling.
2. Clogged filter drier —the refrigerant does not circulate.
3. Thermostat malfunction —the compressor does not receive the command for cooling.

A technician needs diagnostics. You cannot fix these problems yourself.

How to reset error F02 on the display?

Error F02 in refrigerators Indesit indicates a problem with the refrigerator compartment temperature sensor. Try:

1. Disconnect the refrigerator from the mains for 10 minutes.
2. Check whether the door is tightly closed.
3. If the error remains, you need to replace the sensor.

Do you need to enable “Super Freeze” in the new model?

No, this is not necessary. The mode Super Freeze is only needed for quick freezing of a large number of products (for example, if you have loaded warm semi-finished products). In normal mode, the refrigerator itself will reach the optimal temperature in 6–12 hours.

Why does the Indesit refrigerator turn on and off immediately?

Short-term on/off of the compressor (1–2 seconds) indicates:

• Faults starting relay.
• Problems with compressor winding.
• Tripping thermal protection (if the refrigerator is overheated).

Try to turn it off on 30 minutes. If the problem persists, repair is needed.

If your problem does not described in the article, check the refrigerator model Indesit (it is indicated on the nameplate inside the chamber) and contact the service center. For models released after 2020, current instructions can be found on the official website Indesit in the support section.