Does your refrigerator Indesit work around the clock, does not turn off and hums without a break? This is not just an annoying noise - a signal of a possible breakdown, which can lead to food spoilage, compressor overheating, or even a fire. In 80% of cases, continuous operation is associated with thermostat malfunction, freon leakage or pollution systems, but sometimes the problem is solved by simply adjusting the settings.
In this article - a complete checklist of reasons and solutions, compiled from the experience of craftsmen with 10 years of experience in repairing refrigerators Indesit. We will look at how to diagnose a problem based on indirect signs (for example, ice in the freezer or hot walls), when you can handle it yourself, and when you urgently need a technician. We will also reveal 3 myths about “eternal” refrigeratorsthat prevent users from taking action on time.
Why the Indesit refrigerator does not turn off: top 5 reasons
Continuous operation of the compressor is always a consequence of one of the system malfunctions or external factors. Listed below are the most common reasons for models Indesit (including series BIAA 13, DF 4180, T 16 and others).
- 🔥 Faulty thermostat: the temperature sensor is “lying” or does not signal to turn off. The compressor works “blindly”, trying to cool the already cold chamber.
- ❄️ Freon leak: refrigerant has leaked through microcracks in the tubes, and the system cannot reach the set temperature.
- 🧊 Clogged capillary tube: clogged interferes with the circulation of freon, the compressor is overloaded.
- 🔌 Problems with electronics: failure of the control board or compressor start relay.
- 🌡️ Incorrect settings: mode set
Super Freezeor the thermostat is set to maximum.
The first three reasons require the intervention of a specialist, and the last two can be checked independently. For example, if the refrigerator Indesit does not turn off after defrosting, the culprit may be condensate frozen on the evaporator —it needs to be fixed manually.
How to diagnose the problem by external signs
Before disassembling the refrigerator, inspect it for the subject of indirect signs of malfunction. This will help narrow down the range of possible causes.
| Symptom | Probable cause | What to do |
|---|---|---|
| The compressor is hot, but the refrigerator does not freeze | Freon leak or capillary blockage tubes | Turn off, defrost, call a technician |
| Ice in the freezer, the refrigerator works without stopping | The thermostat or defrosting heating element is faulty (for No Frost) | Check the heating element with a multimeter, replace the thermostat |
| The refrigerator turns off for 5-10 seconds and turns on again | Problems with the start relay or control board | Replace the relay or diagnose the board |
| The fan is humming (for No Frost), but there is no cooling | Evaporator freezing or fan malfunction | Defrost for 12-24 hours, check the fan blades |
If the refrigerator Indesit with the system No Frost does not turn off and at the same time accumulated in the freezer ice, the problem is almost certainly in Defrost heating element or defrost timer. In models without No Frost (for example Indesit T 16), the thermostat or freon leak is more often to blame.
⚠️ Attention: If the refrigerator not only does not turn off, but also sparks or smells like burning, immediately disconnect it from the network! These are signs of a short circuit or overheating of the compressor windings - a high risk of fire.
What to do first: step-by-step instructions
Before calling the wizard, follow these steps. In 30% of cases, the problem is solved without repair:
Check whether the door is tightly closed (perhaps the seal or dishes are in the way)
Turn off the mode Super Freeze or Super Cool (if enabled)
Make sure that the thermostat is not set to maximum (optimally - 3-4 division)
Defrost the refrigerator for 10-12 hours (if there is ice)
Check whether the refrigerator is located next to the radiator or stove-->
If after After defrosting, the refrigerator Indesit does not turn off again, proceed to diagnosing the thermostat. To do this:
- Disconnect the refrigerator from the network.
- Remove the thermostat protective casing (usually located inside the chamber, next to the lamp).
- Ring the contacts with a multimeter in resistance testing mode. At room temperature, the resistance should be
0 Ohm(the contacts are closed). - Place the thermostat in cold water - the resistance should become
∞(the contacts will open).
If The thermostat does not respond to temperature and needs to be replaced. For models Indesit thermostats are suitable K59, K50 or AMT-2 (check the exact model by the markings on the body of the old one).
Freon leak: how to determine and what to do
Freon is a refrigerant that circulates through the refrigerator system. If it leaks through microcracks, the compressor runs idle, trying to cool the chambers. Signs of a leak:
- 🔍 The compressor is hot, but the refrigerator is not freezing.
- 💧 Oil on the floor under the refrigerator (freon is mixed with oil from the compressor).
- ❄️ The condenser (grid at the back) is cold or barely warm (normally it should be hot).
It is impossible to eliminate the leak on your own - you need a specialist with equipment to:
- Detect the location of the leak (using a leak detector or ultrasonic detector).
- Remove residual freon and oil from the system.
- Soldering cracks and charging new refrigerant (usually R134a or R600a).
⚠️ Attention: Freon R600a (used in new models Indesit) is extremely flammable! If there is a leak, a spark is enough to cause an explosion. Do not try repair the system yourself.
The cost of repairs for a freon leak: from 3,500 to 8,000 rubles (depending on the model and amount of work). In some cases, it is cheaper to buy a new refrigerator - especially if your model is older than 10 years.
How to check the compressor for leaks. performance?
To make sure that the compressor is working, unplug the refrigerator and touch its housing. If it is sizzling hot, but the refrigerator does not freeze, most likely the compressor is running dry due to a freon leak or blockage. If the housing is cold, there may be a problem. be in the start relay or a break in the windings. For accurate diagnosis, you need to ring the windings with a multimeter (the resistance between the contacts should be within 20-50 Ohms).
Problems with electronics: control board and relay
In modern refrigerators Indesit (for example, BIAA 13 or DF 5200) the compressor is responsible for the operating cycle. control board. If it fails, the refrigerator can:
- 🔄 Turn on and off every 5-10 seconds (the relay “clicks”)
- 🚫 Not turn off at all, despite reaching the set temperature.
- 📛 Show errors on the display (for example,
F05orF11).
The most vulnerable elements of the board are compressor relay and triacs. They can be replaced separately, but it is often cheaper to replace the entire board (the cost of a new one is from 2,000 up to 5,000 rubles).
How to check the relay:
- Disconnect the refrigerator from the network.
- Remove the relay (usually attached next to compressor).
- Test the contacts with a multimeter. In normal condition, the resistance between the contacts
3 and 4should be0 Ohm.
If the relay “clicks”, but the compressor does not start, the problem may be starting capacitor. Its capacity can be checked with a multimeter with a capacitor measurement function (should correspond to the markings on the case, for example, 45 μF ±5%).
When to call a technician: prices and repair times
If you have exhausted all methods of self-diagnosis, and the refrigerator Indesit still does not turn off, it’s time to contact a specialist. estimated prices for repairs in 2026 (may vary depending on the region):
| Type of breakdown | Repair cost (₽) | Term (hours) |
|---|---|---|
| Replacement of the thermostat | 1 500 — 2 500 | 1-2 |
| Eliminating freon leakage + refilling | 3 500 — 8 000 | 3-5 |
| Replacing the control board | 2 000 — 5 000 | 2-3 |
| Cleaning the capillary tube | 2 500 — 4 000 | 4-6 |
| Replacing the compressor | 5 000 — 12 000 | 4-8 |
When choosing a technician, pay attention to:
- 🛠️ Warranty for work (optimally - from 6 months).
- 📋 Availability of original spare parts (ask what parts will be used).
- ⭐ Reviews (check on Yandex.Maps or Profi.ru).
⚠️ Attention: Be careful with "garage" repairmen who offer to refill freon "cheaply". Poor-quality refrigerant or improper soldering can lead to a repeat leak within a few months.
Prevention: how to extend the life of an Indesit refrigerator
To ensure that the refrigerator lasts longer and does not work without stopping, follow these rules:
- 🧊 Defrosting: even for models with No Frost once every 6 months, turn off the refrigerator for 10-12 hours to dry.
- 🔧 Cleaning the condenser: dust on the grille at the back impairs heat transfer. Clean it with a vacuum cleaner once every 3 months.
- 🚪 Door seal: wipe the rubber with soapy water and check the tightness (the sheet of paper should not fall out when the door is closed).
- 🌡️ Temperature range: do not place the refrigerator next to the stove or radiator. The optimal room temperature is
18-22°C.
If yours is older than 7 years, consider buying a new one. refrigerator. Modern models (for example, Indesit over 7 years old, consider purchasing a new refrigerator. Modern models (for example, Indesit EWT 81052) consume 30-40% less electricity and break down less often thanks to an improved system No Frost and protection against voltage surges.
FAQ: Frequently asked questions about Indesit refrigerators
The Indesit refrigerator does not turn off, but it freezes normally?
Most likely, the problem is refrigerator compartment thermostat are suitable. data-i="228">After defrosting, the Indesit refrigerator does not turn off. What to do? (if the freezer is working properly). The thermostat does not detect the achievement of the set temperature and does not turn off the compressor. Solution: replace the thermostat. For models Indesit thermostats K59 or AMT-2.
After defrosting, the Indesit refrigerator does not turn off. What to do?
There is probably ice left in the system, which is interfering with normal air circulation. Turn off the refrigerator for another 10-12 hours, then turn it on. If the problem persists, check defrost heating element (for No Frost) or thermostat (for drip models).
The Indesit refrigerator clicks and does not turn off. Is this a breakdown?
Clicks are a normal sound. operation compressor relay. But if they repeat every 5-10 seconds, and the refrigerator does not freeze, the problem may be:
- Faulty relay (needs replacement).
- Interturn short circuit in windings of the compressor.
- Failure of the control board.
In any case, diagnostics of the master is required.
How long should the Indesit refrigerator work before shutting down?
In normal mode, the compressor works 10-20 minutes, then turns off for 20-40 minutes. The ratio of work and rest depends on:
- Indoor temperature.
- The load of the chambers.
- The set mode (for example,
Super Freezeincreases the operating time).
If the refrigerator operates for more than 30 minutes without a break, this is a cause for concern.
Is it possible to use the Indesit refrigerator if does it not turn off?
Short-term (1-2 days) is possible, but this is fraught with:
- 🔥 Compressor overheating (risk of failure).
- ⚡ Increased energy consumption (up to 2-3 times higher than normal).
- ❄️ Freezing of the evaporator (for No Frost).
If the refrigerator does not turn off for more than a day, turn it off and call a technician.