We rehang the LG refrigerator doors yourself: instructions with photos and tips

Re-hanging the refrigerator door LG is a task that many owners face when moving, renovating a kitchen, or simply wanting to optimize space. Despite the apparent complexity, the procedure is quite doable with your own hands if you know the key nuances: from choosing the right tools to taking into account the features of a particular model. In this article, we will analyze the process step by step, taking into account typical mistakes and pitfalls that can turn a simple operation into a headache. It is important to understand that the design of refrigerator doors differs depending on the series and year of manufacture. For example, models with a system

It is important to understand that the design of refrigerator doors LG differs depending on the series and year of manufacture. For example, models with a system Door-in-Door or two-chamber units with a separate freezer require a special approach. We will look at universal principles and also point out points where specialist help may be required. If you have never done such work, don’t worry: with proper preparation, the process will take no more than 1-2 hours.

Preparation: tools and conditions

Before you begin dismantling, make sure that you have everything you need. Missing even one tool can slow down the process or damage parts. Here is the basic set:

• 🔧 Phillips screwdriver (usually PH2 or PH3) - for most screws
• 🔧 Hex wrench (if the model uses internal hex bolts)
• 📏 Tape measure or ruler - for checking gaps after installation
• 🧲 Magnet or telescopic grip - so as not to lose small parts (for example, washers)
• 🧴 Silicone grease - for processing hinges after hanging

Also prepare your workspace: clear access to the refrigerator from all sides, place a soft cloth on the floor (so as not to scratch the door when removing it), and turn off the power this will eliminate the risk of a short circuit when working with metal parts. If the refrigerator is new and still under warranty, check the service conditions - some manufacturers will void the warranty if you tamper with the design yourself.

Determine the type of door fastening in your model

Refrigerators LG use three main types of door fastening, and the algorithm depends on this actions:

1. Standard hinges with screws —the most common option. The hinges are attached to the body and door with 3-4 screws each. Such models are easiest to rehang.
2. Hinges with hidden fastening —the screws are closed with decorative plugs (often in models LG InstaView or Door-in-Door). Here you will need to be careful not to damage the plastic elements.
3. Bottom axis with a lock —used in some models with a French door. Here the door is removed by pulling upward after unscrewing the top hinge.

To accurately determine the type of fastening, inspect the hinges: if the screws are visible from the outside, you have the first option. If the hinge looks monolithic, look for plugs (usually they are pryed off with a flat screwdriver). In models LG GR-B207* and similar series, the lower hinge may have an additional lock that blocks the door when opening more than 90° - this must be taken into account when dismantling.

How to find the model of your refrigerator?

The model is indicated on a sticker inside the refrigerator compartment (usually on the left wall) or on the back panel of the case. Starts with letters GR-, GA-, GC- etc. For example, LG GA-B419SLQZ.

Step-by-step instructions for rehanging doors

Consider a universal algorithm for most models LG with standard hinges. If your refrigerator is a different type, adjust the steps according to the design features.

Take a photo of the current position of the hinges|Unplug the refrigerator|Remove all food from the door|Prepare tools and soft bedding-->

Step 1: Removing the top hinge

Start with the top loop - it is usually easier to handle. Carefully unscrew the screws (usually 3 pieces), holding the door so that it does not fall. Some models have an additional screw hidden under the decorative hinge cover—don't miss it. After removing the hinge, the door can be carefully lifted and removed from the lower axis.

Step 2: Transferring the hinges to the other side

On the opposite side of the case you will see plugs for the hinges - they need to be removed (pry them off with a screwdriver) and moved to the vacated holes. The hinges are attached symmetrically, but sometimes the holes for the screws can be closed with technological plugs - they also need to be removed.

Step 3: Installing the door in a new position

Hang the door on the lower axis, then secure the upper hinge. Important: do not tighten the screws all the way at once! First, check whether the door hangs evenly and whether there are any distortions. If the door sag or does not close well, loosen the screws and adjust the position.

Step 4: Adjustment and check

After installation, check:

• ✅ The seal fits tightly around the entire perimeter (you can use a sheet of paper - it should hold tightly when closed door).
• ✅ No creaks or resistance when opening/closing.
• ✅ Symmetrical gaps between the door and the body (should be the same at the top and bottom).

If the seal does not fit tightly, the door may be hanging crookedly. Adjust the position of the hinges by slightly loosening the screws and moving the door in the desired direction.

Features for models with a water dispenser

Refrigerators LG with a water dispenser or ice maker (for example, series LRMVC2306S or LSXS26366S) require additional manipulations:

1. Before removing the door, turn off the water supply (close the tap on the pipe, going to the refrigerator).
2. Remove the dispenser panel - usually it is attached with latches or screws from the bottom.
3. Disconnect the water supply hoses, first placing a container for the remaining liquid.
4. When reversing the door, the hoses must be carefully transferred to the other side, avoiding kinks.

After installing the door, check the tightness of the hose connections - leaks can lead to a short circuit! Also note that in some models, when reversing the door, the dispenser is automatically blocked and requires reprogramming (instructions are in the user manual).

⚠️ Attention: If after reversing the dispenser does not work, check the position of the door closing sensor. In models with touch controls, you may need to reset the settings (press the button Ice Type for 5 seconds).

Common errors and how to avoid them

Even with careful preparation, you can make mistakes that will lead to incorrect operation of the refrigerator. Here are the most common of them:

Another typical problem - they forget to rearrange magnetic holder (if it is in the model). This small element holds the door half open and is often attached to the top hinge. Without it, the door may close spontaneously or, conversely, remain open.

When it is better to call a specialist: complex cases

Despite the apparent simplicity, there are situations when it is better to entrust the hanging of doors to a professional:

• 🔧 Refrigerators with electronic door control (for example, models with function Smart ThinQ, where the door is blocked by a smartphone). This requires reconfiguring the sensors
• 🔧 Models with built-in TV (series LG InstaView Door-in-Door). Incorrect handling of the wiring can damage the display.
• 🔧 Refrigerators with a door attached to gas shock absorbers (found in premium series). Special equipment is required for refilling
• 🔧 If during dismantling you find corrosion on hinges or damage to the threads, self-repair can aggravate the problem.

The cost of the service for hanging doors in service centers LG varies from 1,500 to 3,500 rubles (depending on the region and complexity of the model). If you are not confident in your abilities, compare this amount with the cost of possible repairs in the event of an error. For example, replacing a broken hinge will cost 2000-5000 rubles, and repairing electronics will cost even more.

⚠️ Attention: In models with the system No Frost after rehanging the door, air circulation may temporarily deteriorate. This is normal - after 1-2 days the system will be restored. If after a week the freezer is still not freezing well, check the tightness of the door.

FAQ: answers to frequently asked questions

Is it necessary to defrost the refrigerator before re-hanging the doors?

No, mandatory defrosting is not required. However, if there is a lot of ice in the freezer, it is better to remove it - this will make it easier to access the hinges and prevent moisture from getting on the electrical contacts (in models with a dispenser). It is enough to transfer the food into a cooler bag and let the ice melt naturally in 1-2 hours.

Is it possible to hang only one door (for example, only the freezer)?

Yes, but it depends on the model. In two-chamber refrigerators LG with separate opening (for example, GA-B429) the doors are hung independently. In models with a common hinge (for example, GC-B247), you will have to remove both doors, even if you want to rehang only one.

What to do if, after rehanging, the door does not close tightly?

The reasons may be different:

1. Hinges are skewed - loosen the screws and adjust the position.
2. If debris gets under the seal - clean the rubber band and the body.
3. Deformation of the seal - try heating it with a hairdryer (temperature up to 50°C) or replace it.
4. Incorrect installation of the magnetic holder (if there is one) model).

If the problem cannot be solved, check the geometry of the door - perhaps the axis was damaged during dismantling.

How long does it take to rehang the doors?

On average, the procedure takes from 40 minutes to 2 hours, depending on:

• The experience of the master (a beginner will need more time).
• Difficulties of the model (for example, with a dispenser longer).
• Presence of complications (rusty screws, damaged hinges).

Take your time - it is better to spend an extra 30 minutes on careful work than to correct mistakes later.

Is it possible to rehang the door on a refrigerator LG with a French door (double-leaf)?

Yes, but this is a more labor-intensive process. In such models (for example LRMVC2306S), the top panel is first removed, then both doors are dismantled, and the hinges are rearranged in a mirror manner. The main difficulty is synchronizing the doors after installation so that they close at the same time. You can’t do without an assistant here!