Refrigeration equipment of the brand Pozis is deservedly popular due to its reliability and affordable cost, but even the highest quality equipment requires regular care. Sooner or later, every owner faces the need to carry out general cleaning, eliminate an unpleasant odor, or replace a damaged part of the interior of the camera. Removing the internal components yourself is the first step to keeping the unit clean and extending the life of the unit, but it requires knowledge of the design.
Many users have difficulty removing the glass insert or plastic container for fear of damaging the fragile guides or breaking the tempered glass. An incorrect approach to dismantling can lead to breakage of the clamps, after which the shelf will fall out at the slightest vibration. To avoid such situations, it is important to understand that the fastening system in different models Pozis may differ significantly.
In this guide we will analyze in detail the algorithms of actions for various types of shelves and drawers, applicable to most modern and classic models of the Russian brand. You'll learn where to look for hidden latches, how to apply pressure correctly, and what precautions to take. A competent approach will allow you, without the risk of injury and shelves, to free up the interior space of the refrigerator for thorough washing.
Preparation for removing internal elements
Before taking active steps to dismantle any interior parts, it is necessary to ensure safe working conditions. The first step is to completely unload the refrigeratorremove all products, jars and containers, since even a small additional load can become critical for old plastic fasteners. If you plan to wash the removed elements with hot water, make sure that they have time to warm up to room temperature.
⚠️ Attention: A sharp temperature change can lead to the destruction of the structure of tempered glass. If the shelf has spent several hours in the cold, let it sit for 15-20 minutes at room temperature before contacting warm water.
Particular attention should be paid to the floor in the work area, covering it with a soft towel or rug in case the heavy glass insert does slip out of your hands. It is also recommended to prepare clean rags and detergent in advance so that you can immediately treat the freed surfaces while they are accessible. For models with the system No Frost it is important not to damage the air supply channels, which are often located on the back wall.
☑️ Preparation for dismantling
It is important to understand that plastic becomes more brittle over time, especially in constant cold conditions. Therefore, all manipulations should be carried out smoothly, without jerking, carefully observing the reaction of the fasteners. If you feel strong resistance, it means that the action is being performed incorrectly and the design needs to be rechecked.
Removing glass shelves in the refrigerator compartment
Glass shelves in refrigerators Pozis are usually installed on special metal or plastic guides mounted on the side walls of the chamber. In most classic models, the removal process is straightforward: you need to slightly lift the front edge of the glass to disengage it from the support grooves, and then smoothly pull it towards you. However, in some modern modifications there may be additional locking mechanisms.
If the glass cannot be removed by simply moving it up, carefully inspect the side edges. There may be small plastic tabs or tabs that you need to press or bend. Sometimes these latches are located on the underside of the shelf, closer to the front edge, and activating them allows you to remove the restriction on vertical movement. Do not use brute force, as this is a sure way to crack glass or break thin plastic.
For models with height-adjustable levels If you need to remove not only the glass, but also the metal slides, they must be carefully pulled out from the holes in the wall, having previously freed it from the load. In some cases, this requires turning the guide around its axis by 90 degrees.
| Type of fastening | Dismantling method | Risks |
|---|---|---|
| Simple stops | Lifting up and down yourself | Falling glass |
| Plastic latches | Pressing the latch | Plastic breakage |
| Metal runners | Pulling guide | Metal deformation |
| Hidden latches | Combined movement | Hand injury |
Removing plastic boxes and containers
Plastic boxes for vegetables and fruits, as well as the top containers of the freezer compartment in refrigerators Pozis often have their own specific fastening. Bottom drawers are usually mounted on plastic rails or simply inserted into slots in the cabinet. To remove such an element, you need to grab the special recesses or handles on both sides and pull towards you until it stops, then slightly lift the front part.
In models with a system multitermo or improved insulation, the drawers can be equipped with additional stops that prevent them from completely falling out if used carelessly. In this case, you need to pull out the drawer until it clicks or stops, and then, without releasing it, press the special levers on the sides or lift the back part to disengage it.
The top drawers of the freezer often lie on a glass shelf or special ledges. Their dismantling is as simple as possible: we take them by the handles, pull them towards us and up. However, if the box “sits” very tightly due to ice formed, do not yank it under any circumstances. Turn on the defrost or use a hair dryer (with caution) to melt the ice crust, otherwise you may break off the handle or deform the body of the drawer.
Removing the shelves on the refrigerator door
The shelves on the refrigerator door Pozis are designed for storing bottles, sauces and eggs, so they must withstand a certain weight, but at the same time be easily removed for washing. The design of such elements usually involves the presence of plastic hooks on the inside, which are inserted into reciprocal grooves on the inner wall of the door. To dismantle, you need to take the shelf with both hands from the sides, lift it slightly and pull it towards you.
It is important to consider that the plastic parts on the door are often subject to the greatest mechanical stress and may lose their elasticity over time. If the shelf cannot be removed, try rocking it slightly left and right while lifting it up at the same time. Sometimes one of the hooks may get stuck and a gentle wiggle will help release it without breaking it. Be careful with tall bottle holders - they often have long guides.
⚠️ Attention: When installing bottles on the door, distribute the weight evenly. Skewing to one side creates excess pressure on the shelf fastenings, which can lead to its sudden fall when the door is opened.
Some models are equipped with shelves with variable geometry or additional partitions. Before removing such a structure, it is recommended to remove all removable elements and separators in order to reduce the size and weight of the product. This will simplify the process and reduce the risk of touching adjacent interior elements.
Design features of the freezer compartment
The freezer compartment of refrigerators Pozis can have a different layout: from classic drawers to open shelves. If your freezer model is equipped with shelves, then the principle of removing them is similar to the refrigerator compartment, but adjusted for the material. Often thicker glass or metal is used here that can withstand low temperatures and the weight of frozen food.
If the freezer is a single compartment without drawers, the shelves can be mounted on side ledges molded directly into the body. They can only be removed by applying upward and outward force. However, in modern models with the system No Frost Access to the internal shelves may be limited by the evaporator or protective panels, which are best not touched unless necessary.
What to do if the shelf is frozen?
If the shelf in the freezer is frozen, do not try to tear it off by force. Use a plastic scraper or putty knife to carefully scrape away the ice around the perimeter. You can also place a cloth soaked in warm water on the ice, but make sure that water does not get inside the mechanism.
When servicing the freezer, it is extremely important not to damage the condensate drainage system, which often runs at the bottom of the compartment. When removing bottom drawers or shelves, be careful not to hit or dislodge the drain holes. Any damage to the inner lining of the chamber can lead to loss of tightness and the formation of excessive ice in the future.
Care of removed parts and assembly
After you have succeeded safely remove shelves and drawers, the stage of cleaning them begins. Warm water with a mild detergent or baking soda is ideal for cleaning glass surfaces. Do not use abrasive powders or hard sponges, as they can leave micro-scratches that will eventually lead to clouding of the glass or cracks.
Plastic elements, especially vegetable drawers, require thorough drying before putting them back. Moisture in closed containers is an ideal breeding ground for bacteria and mold. Wipe all parts dry with a soft cloth and leave in the air until the moisture completely disappears. Also inspect the guides in the refrigerator itself and wipe them, removing dust and crumbs.
Assembly is carried out in the reverse order: first install the guides (if they have been removed), then the glass inserts and, finally, the plastic ones boxes. Make sure that each element snaps into place with a characteristic click or stop. Check the horizontal position of the shelves so that the products do not roll down and the drawers move smoothly, without jamming.
Can the shelves be washed in the dishwasher?
Most manufacturers, including Pozis, do not recommend washing glass shelves with plastic edging in dishwasher. High temperatures and aggressive detergents can lead to deformation of the plastic, clouding of the glass or destruction of the adhesive layer. It is better to limit yourself to manual washing.
What to do if the shelf is cracked?
Using a cracked glass shelf is strictly prohibited, even if the crack seems small. Under the weight of food or due to thermal expansion, the crack can instantly expand and the shelf will collapse. Replace the damaged element with an original or an analogue that exactly fits in size.
How to remove a shelf if the handle is broken?
If the handle on a drawer or shelf breaks off, do not try to pull the edge of the plastic - it may burst. Carefully pry the base of the handle or the drawer itself with a flat screwdriver wrapped in fabric at the places where it is attached to the guides to release the latches, and then remove the part.
Why does the shelf fall out after installation?
This can happen for several reasons: the plastic latches on the shelf itself are worn out or broken, the guides on the wall of the refrigerator are deformed or The shelf is not fully installed. Check the integrity of all elements and the tightness of their fit.
How often do you need to remove the shelves for washing?
It is recommended to completely clean the refrigerator by removing all internal elements at least once every 3-4 months. This will help maintain hygienic safety and prevent the appearance of persistent unpleasant odors from spilled liquids.