Setting the temperature in a two-chamber Samsung refrigerator: video instructions and expert advice

Two-chamber refrigerators Samsung with a system No Frost or drip defrosting require correct temperature settings - from this Not only the freshness of the products depends, but also the service life of the equipment. Many users encounter problems: the freezer freezes, but the main chamber is too warm, or vice versa. Often the culprit is an incorrectly selected mode or accidentally changed settings after cleaning or moving.

In this article you will find step-by-step instructions with videohow to set the temperature on a refrigerator Samsung with mechanical and electronic control, as well as a table of optimal values ​​for different types of products. We will analyze common mistakes (for example, why the refrigerator does not maintain the set temperature) and give tips on saving energy without compromising the quality of cooling. If you just bought equipment or encountered problems, here are the answers to all your questions.

Video instructions: how to set the temperature on a Samsung refrigerator

For a visual understanding of the process, we recommend that you read the official video from Samsung (available on them YouTube channel). The video shows:

• 🔹 Location of the control panel (depending on the model - inside the camera or on the door).
• 🔹 Sequence of pressing buttons to change modes (Fridge for the main cameras Freezer for the freezer).
• 🔹 How to activate the function Power Cool for fast cooling.
• 🔹 Signs of correct operation (sound signal, indication on the display).

If video is not available or you have a model with mechanical regulator (for example, Samsung RT-22 HAR4DSA1), use the text instructions below. Please note: the interface may differ depending on the series (Family Hub, Twin Cooling Plus or budget models).

Optimal temperatures for refrigerator and freezer compartments

The manufacturer recommends maintaining a temperature between main chamber data-i="78">to +2°C to +6°C, and in freezer - from -18°C to -24°C. However, these values can be adjusted depending on:

• 🥦 Type of food: meat and fish require lower temperatures (+1…+3°C), and fruits and vegetables are stored at +4…+6°C.
• 🏡 Indoor climate: if the kitchen is hot (higher +25°C), the refrigerator works more intensely.
• ⚡ Door opening frequency: in families with children, the temperature may “go” 2–3°C up.

Critical error: if the temperature in the freezer is higher -12°C, the food begins to deteriorate, and the compressor works in an increased mode, which reduces its resource. To check the accuracy of the indicators, use external thermometer (for example, Xiaomi Mijia Bluetooth) - built-in sensors can give an error of up to ±2°C.

Step-by-step instructions for models with electronic control

Electronic control panels (for example, in series Samsung RB30A3200SA or RF23A9671SG) allow you to adjust the temperature with an accuracy of up to 1°C. Follow the algorithm:

1. Press the button Fridge (refrigerator) or Freezer (freezer). The current value will flash on the display.

2. Use the +/– (or ▲/▼) buttons to set the desired temperature. Range for the refrigerator compartment: +1…+7°C, for the freezer: -14…-25°C.

3. Confirm the selection with the button OK or wait for automatic saving (after 5 seconds).

4. To activate holiday mode (if you are leaving long) press Vacation —the temperature in the main chamber will rise to +15°C.

In models with a display Family Hub (for example, Samsung RF23M8590SG), the setting is carried out via the touch menu:

Home screen → Settings (gear) → Temperature → Refrigerator/Freezer

Make sure the door is tightly closed|Check if food is blocking the vents|Wait 24 hours for temperature to stabilize|Use a thermometer to check measurement-->

Setting the temperature in refrigerators with a mechanical regulator

In budget models (for example, Samsung RT-18 HAR4DSA1), the temperature is controlled by rotary knobs inside the chambers. There is no digital indication here, so focus on the positions:

• 🔘 1–2 — minimum cooling (+6…+8°C in the main chamber).
• 🔘 3–4 — optimal mode (+3…+5°C).
• 🔘 5–7 — maximum cooling (+1…+2°C or -24°C in the freezer).

⚠️ Attention: If the knob is in the 0 or OFFposition, the camera is turned off! This is a common cause of “breakdowns” after moving or cleaning. Also, avoid setting the regulator to maximum. (7) - this leads to icing of the evaporator and increased energy consumption.

To check accuracy:

1. Place a glass of water on the middle shelf.
2. Via 12 hours, measure the water temperature with a thermometer.
3. If the value is higher +5°C, turn the knob one notch to the right.

Typical errors and their elimination

Even after correct adjustment, the temperature may “float.” Let's consider common problems and solutions:

• ❄️ Ice forms in the freezer and food thaws
  Cause: malfunction of the defrost sensor or clogged drainage hole.
  Solution: defrost the refrigerator for 12 hours, clean the hole in the back wall with wire. If the problem persists, the sensor needs to be replaced.
• 🔥 The refrigerator compartment does not cool, but the freezer is working normally
  Cause: freon leak in the main chamber circuit or fan failure (in models with No Frost).
  Solution: call a technician - independent repair is impossible.
• ⚡ The compressor runs without stopping
  Cause: high room temperature, worn door seal or overload of products.
  Solution: check the tightness of the door closure (use a test with a sheet of paper), reduce the loading of the chambers.

⚠️ Attention: If after adjusting the settings the refrigerator Samsung gives an error 22E (problem with the evaporator sensor) or 40E (fan malfunction), do not try to reset it manually. This may cause the control board to fail. Contact the service center.

Saving electricity without losing the quality of cooling

The refrigerator Samsung consumes up to 30–50 kWh per month, but this figure can be reduced by 15–20% without damage to the products. Here are the tested ones. methods:

• 🌡️ Set the temperature +4°C in the main chamber and -18°C in the freezer —this is enough for the safety of most products.
• 📦 Fill the chambers to 70-80%: an empty refrigerator spends more energy cooling the air.
• 🚪 Minimize the time you open the door: plan what you need to take before opening.
• ☀️ Keep the refrigerator away from heat sources (stoves, radiators, direct sun). The optimal distance to the wall is 5–10 cm.

In models with the function Eco Mode (for example, Samsung RB37A5200SA) activate it through the menu:

Settings → Energy saving → Eco Mode (On)

⚠️ Attention: Do not turn off the refrigerator at night to “save” - this will lead to food spoilage and increased load on the compressor when restarting. Use holiday mode (Vacation), if you do not use the equipment for more than a week.

Setting features in Samsung refrigerators with the Twin Cooling Plus system

Technology Twin Cooling Plus (installed in models Samsung RF23HCEDBSR, RF65A9881SG etc.) assumes two independent cooling circuits for refrigeration and freezer compartments. This allows:

• 🍎 Maintain different humidity (for example, 70% in the main chamber and 50% in the freezer).
• ❄️ Faster restore the temperature after opening the door.
• 🦠 Prevent the mixing of odors between chambers.

To configure:

1. Press Twin Cooling on the control panel.
2. Select mode Optimal (automatic) or Custom (manual setting).
3. In mode Custom set the temperature separately for each chamber.

⚠️ Attention: In models with Twin Cooling Plus You cannot turn off one of the cameras completely (for example, a freezer). The minimum temperature in an unused chamber will be +10°C (mode Vacation).

FAQ: Frequently asked questions about setting the temperature

Settings → Sounds → Signal (Off)