A burnt-out light bulb in a refrigerator Samsung is a problem that almost every owner of equipment older than 3-5 years faces. Even in modern models, lighting elements fade or fail over time. Fortunately, you can replace the lamp yourself, without the help of a specialist - the main thing is to know LED backlight Lighting elements fade or fail over time. Fortunately, you can replace the lamp yourself, without resorting to the help of a specialist - the main thing is to know the exact model of the refrigeratorthe type of lamp and follow safety precautions.
In this article you will find:
- 🔍 Step-by-step instructions for refrigerators with top, bottom and side lamps
- 💡 Lamp compatibility table for popular series Samsung (RB, RT, RS, RF, etc.)
- ⚠️ Critical errorswhich lead to a short circuit or damage to the board
- 🛠️ List of tools and where to buy original lamps (including articles)
If your refrigerator Samsung (suddenly stopped lighting), do not rush to panic: in 90% of cases the lamp is to blame, not the electronics. Even if you have never held a screwdriver in your hands, our instructions with photos will help you get it done in 15-30 minutes.
1. How to determine the type of lamp in a Samsung refrigerator
Before buying a new lamp, you need to find out exactly what type of lighting is used in your model. Not only the price depends on this, but also the replacement algorithm.
In refrigerators Samsung there are 3 types of lamps:
- 💡 Incandescent lamps —an outdated version, found in models before 2010 (series
SR-, SR-*L). Power is usually 15–25 W, baseE14orE12. - 🔆 Halogen lamps —used in 2010–2016 (series
RB-3, RT-2, RS-5**). BaseG4orGU5.3, voltage 12 V. - 🌟 LED lamps - the modern standard for models after 2016 (series
RF-2, RS-6, Family Hub). They can be built into the board or removable modules.
To find out the type of lamp:
- Open the refrigerator door and look at the lampshade. If the glass bulb is visible, it is an incandescent or halogen lamp. If the lampshade is matte or the light comes from point sources, most likely LED.
- Check the sticker on the inside wall of the refrigerator (usually on the left) - the model is indicated there. Enter it into a search engine with the request “model + lamp diagram."
- If the lamp has already been removed, look at the markings on the base or bulb. For example,
GU5.3 12V 20Wis a halogen lamp.
⚠️ Attention: In models with the system No Frost (for example, Samsung RB37J5230SS) the lamp can be hidden under a decorative panel. Do not try to remove it by force - first turn off the power and remove the fasteners.
2. Tools and materials for replacement
To replace the lamp in the refrigerator Samsung you will need:
| Tool/material | Purpose | Where to buy |
|---|---|---|
| Phillips screwdriver (PH2) | For removing the lampshade and fasteners | Any hardware store |
| Flat screwdriver (3–5 mm) | For prying up the latches lamp | The same |
| Dielectric gloves | Protection against electric shock (for halogen lamps) | Electrical goods stores |
| New lamp (according to article number) | Replacing a burnt-out one | Official service centers Samsung, AliExpress, eBay |
| Multimeter (optional) | Checking the voltage in the cartridge | Shops electronics |
For models with LED backlight a soldering iron (if the lamp is soldered to the board) or a special puller for connectors may be required. In most cases, a flat screwdriver is enough.
Articles of original lamps for Samsung:
- 🔹 Incandescent lamp
E14:DA97-08007A(25 W, for older models) - 🔹 Halogen
GU5.3:DA97-12323A(12 V, 20 W) - 🔹 LED module:
DA92-14376A(for series RF-23, RS-55)
⚠️ Attention: Do not use lamps more powerful than indicated in the instructions! For example, if in the refrigerator there was a 20 W halogen lamp, setting 35 W will lead to overheating of the lampshade and melting the plastic.
☑️ Preparing to replace the lamp
3. Step-by-step instructions: replacing an incandescent lamp
This type of lamp is found in refrigerators Samsung manufactured before 2010 (for example, SR-223NP, SR-285NPThe replacement algorithm is simple, but requires caution due to the fragility of the glass bulb.
Step 1: Power off
Unplug the refrigerator from the socket. If access to the socket is difficult, turn off the machine on the panel. Do not rely on the defrost button - it does not de-energize the lamp!
Step 2. Removing the lampshade
- Open the refrigerator door.
- Locate the lampshade (usually in the upper part, under the roof of the chamber).
- Carefully pry the lampshade from the side with a flat screwdriver - it is secured with latches. In some models, you must first unscrew it. 1-2 screws with a Phillips screwdriver.
- Remove the lampshade and place it on a flat surface (for example, on a table).
Step 3. Replacing the lamp
- Remove the burnt out lamp by carefully turning it counterclockwise (base
E14orE12). - Screw in the new lamp all the way, but do not use excessive force - you can break the thread.
- Make sure that the lamp contacts do not touch metal parts lampshade.
Step 4. Assembly
Install the lampshade into place by snapping it in place or tightening the screws. Turn on the refrigerator and check the lamp operation. If the light does not light up, check:
- 🔌 Is the lamp inserted correctly (sometimes the base is not working). reaches the contacts).
- 🔧 Is the cartridge damaged (burnt contacts or cracks).
- ⚡ Is there voltage in the socket (check with another device).
4. Replacing a halogen lamp (12 V)
Halogen lamps were installed in refrigerators Samsung 2010–2016 (for example, RB-30J3000WW, RT-28HAR4DSA). feature - low voltage (12 V), so the lamp is connected via a step-down transformer. Step 1. Dismantling the lampshade. The lampshade in these models is usually attached to 2-3 screws. Unscrew them with a Phillips screwdriver and remove the lampshade. Be careful: halogen lamps heat up to high temperatures, so the lampshade may be deformed. step down transformer.
Step 1. Dismantling the lampshade
The lampshade in these models is usually secured with 2-3 screws. Unscrew them with a Phillips screwdriver and remove the lampshade. Be careful: halogen lamps heat up to high temperatures, so the lampshade may be deformed.
Step 2. Removing the lamp
- Put on gloves - Do not touch the glass bulb with your bare hands! Oil from your fingers will shorten the life of the lamp.
- Gently pull the lamp towards you - it is held on two pin contacts (
GU5.3orG4). - If the lamp cannot be removed, slightly rock it from side to side.
Step 3. Installing a new lamp
Insert the new lamp into the socket until it clicks. Make sure that the contacts match the connectors. Do not touch it. bulb after installation! If you accidentally touch it, wipe it with alcohol.
Step 4. Checking the transformer
If the lamp does not light after replacing, the problem may be in the transformer (power supply). It is located behind the lampshade or on the back wall of the refrigerator: Signs of a malfunction:
- 🔥 Extraneous burning smell.
- 🔌 Blackened contacts.
- 💥 Cracking noise when turned on.
In this case, you will need to replace the transformer (article number DA41-00394A for most models).
⚠️ Attention: Never turn on the halogen lamp without a lampshade! It can explode due to overheating. Always check the operation of the lamp only after complete assembly.
5. Replacing the LED lamp or module
Modern refrigerators Samsung (series Family Hub, BESPOKE, RF-23**) are equipped LED-backlit. Here the lamp can be:
- 🔹 Removable - in the form of a separate module with a connector (for example,
DA92-14376A). - 🔹 Soldered into the board —requires a soldering iron (found in models with touch controls).
Step 1. Access to the LED module
In most cases, the module is hidden under a decorative panel. To remove it:
- Unplug the refrigerator.
- Remove the shelves that interfere with access.
- Pry the panel with a flat screwdriver from the side (usually there is a small groove).
- Carefully remove the panel, do not pull it sharply - it can be damaged latches.
Step 2. Replacing the removable module
If the lamp is on the connector:
- Disconnect the power connector from the module (usually it is white with 2-4 contacts).
- Remove the old module from fastenings.
- Install the new module and connect the connector. Make sure that the contacts match.
Step 3. Replacing the soldered lamp
If the LED lamp is soldered into the board (found in models with a display, for example, Samsung RF23HCEDBSR):
- Solder the old lamp with a soldering iron (power no more than 30 W, so as not to damage the board).
- Clean the contacts from solder.
- Install a new lamp (pay attention to the polarity!).
- Solder the contacts without overheating the board.
⚠️ Attention: If you are not confident in your soldering skills, it is better to contact a service center. Incorrect soldering can lead to a short circuit and failure of the control board (repair cost - from 5,000 rubles).
What to do if after replacement Is the LED lamp blinking?
Blinking may be caused by a malfunction of the driver (power supply for the LED). Check the voltage at the connector contacts with a multimeter - it should be stable 12 V. If the voltage fluctuates, the driver needs to be replaced (part number depends on the model, for example DA93-00316A for series RF-23**).
6. Frequent). mistakes and how to avoid them
Even with the apparent simplicity of replacing a lamp, many make mistakes that lead to repeated breakdown or damage to the refrigerator. Here are the most common ones:
| Error | Consequences | How to avoid |
|---|---|---|
| Replacing the lamp without turning off the power | Electric shock, short circuit, board failure | Always unplug the plug from the socket! |
| Touching a halogen lamp with bare hands | Reducing the lamp life by 2-3 times | Use gloves or a napkin |
| Using a lamp of a different power | Overheating of the lampshade, melting plastic, fire | Check the markings on the old one lamp |
| Incorrect installation of the lamp | Poor contact, lamp flickering, overheating | Make sure that all latches are locked |
| Ignoring the transformer check (for halogen lamps) | The new lamp will burn out immediately after switching on | Check the voltage at the output of the transformer |
Another typical problem is the lamp is on, but dimThis can be caused by:
- 🔋 Discharged batteries in the remote control (if the control is electronic).
- 🔌 Oxidation of contacts in the socket - clean them with alcohol.
- 💡 Low-quality lamp - buy only original or certified analogues.
7. Where to buy a lamp for a Samsung refrigerator
Original lamps for Samsung can be bought in several places:
- 🏬 Official service centers —a guarantee of quality, but the price is higher than the market (for example, an LED module
DA92-14376Acosts ~1,200 rubles). - 🌍 AliExpress, eBay —cheaper, but the risk of running into a fake. Look for sellers with a higher rating. 98%). data-i="260">When purchasing, pay attention to:
- 🛒 Stores of spare parts for household appliances (for example, “220 Volt”, “Techport”).
- 🔧 Refrigerator dismantling - a budget option, but the lamp can be used.
When purchasing, pay attention to:
- 🔍 Article —must match the original one.
- 🔆 Plinth type —
E14,GU5.3etc. - 📏 Dimensions —especially important for LED modules.
- 💡 Voltage — 220 V for incandescent lamps, 12 V for halogen.
For models with Family Hub (for example, Samsung RF23HCEDBSR) it is better to buy lamps only in official stores - non-original ones may not fit the connector or cause errors on the display.
⚠️ Attention: In markets and in uncertified stores they often sell lamps with the wrong color temperature (for example, cool white instead of warm). This not only spoils the appearance, but can also distort colors. products.
8. When to contact the service center
Replacing the lamp does not always go smoothly. In some cases, it is better to trust the professionals:
- 🔌 If after replacing the lamp the refrigerator does not turn on — perhaps a short circuit has occurred.
- 💥 If you hear it when you turn it on crackling or smoke is visible it is a sign of a malfunction of the transformer or board.
- 🔧 If the lamp is soldered into the board, and you have no soldering experience.
- 📱 If the refrigerator is with touch control (series Family Hub) and after replacing the lamp an error appeared on the screen.
The cost of replacing the lamp at the service center:
- 💡 Incandescent/halogen lamp: 800–1,500 rubles (including labor).
- 🌟 LED module: 1,500–3,000 rubles (depending on the model).
- 🔧 Replacement of a transformer or board: from 3,000 rubles.
If your refrigerator is under warranty, Do not try to replace the lamp yourself this may cause a failure for warranty repairs, contact an authorized service center Samsung.
FAQ: Frequently asked questions about replacing the lamp. Samsung refrigerator
🔹 Is it possible to replace an incandescent lamp with an LED?
Technically yes, but you need to take into account several nuances:
- The LED lamp must be 220 V (if the original one was incandescent).
- The base must match (
E14orE12). - The power of the LED lamp should be equivalent to the old one (for example, 5 W LED ≈ 25 W incandescent).
However, in some models Samsung the lampshade is not designed for LED lamps - they can overheat. It is better to use original spare parts.
🔹 Why does a new lamp burn out immediately after installation?
The reasons may be the following:
- Faulty transformer (for halogen lamps).
- Power surges in the network - install stabilizer.
- Bad contact in the socket - clean the contacts with alcohol.
- Poor quality lamp - buy only proven ones brands.
🔹 How to remove the lampshade if it is not removable?
In some models Samsung the lampshade is secured with hidden latches. Try:
- Gently press on the side of the lamp and pull it towards you.
- Use a plastic spatula (for example, to remove the phone panel) so as not to scratch the plastic.
- Watch video instructions for your model on YouTube - they often show “secret” methods.
If the lampshade still cannot be removed, it may be glued. In this case, it is better to contact the service.
🔹 Can I use a lamp from another refrigerator?
Only if they match:
- Type of base (
E14,GU5.3etc.). - Voltage (12 V or 220 V).
- Power (do not exceed the original!).
For example, a lamp from LG with a base E14 can be installed in Samsung, if the power is the same. But it is better to use original spare parts.
🔹 How long does the lamp last in a Samsung refrigerator?
The service life depends on the type of lamp:
- 💡 Incandescent lamp: 1,000–2,000 hours (~1–2 years with active use).
- 🔆 Halogen lamp: 2,000–4,000 hours (~2–3 years).
- 🌟 LED lamp: 10,000–20,000 hours (~5–10 years).
In practice, lamps last less due to power surges and frequent opening doors and temperature changes.