Disassembling a drawer of a Samsung refrigerator: instructions with photos and repair tips

The refrigerator hood Samsung is one of the most vulnerable parts: it is regularly subjected to stress, becomes clogged with crumbs and can crack from careless handling. Disassembling it yourself is easier than it seems, but there are nuances depending on the type of defrosting system (No Frost or drip), refrigerator model and even year of manufacture. This article contains step-by-step instructions with photos, a list of necessary tools and a list of typical errors that lead to breakage of guides or fasteners.

Important: disassembling the box may be required not only for repairs, but also for deep cleaning (for example, if the drainage hole mold has accumulated) or replacing the seal. We will consider universal methods suitable for most models Samsung last 10 years, including series RB, RT, RS i RF. If your refrigerator is older, check for the presence of specific fasteners (more on this below).

Before you start, answer two questions:

• 🔧 Which defrosting system in your refrigerator? (No Frost or drip)
• 📦 Which drawer needs to be disassembled? (top, bottom, for vegetables/fresh-zone)

1. Preparation: tools and safety measures

You don’t need professional tools to disassemble the box, but you can’t do without improvised means. Here is the minimum set:

• 🔨 Flat screwdriver (for prying latches and removing covers).
• ⚙️ Phillips screwdriver (if the box is secured with screws, as in old models).
• 🧲 Magnet or tweezers (so as not to lose small parts: washers, gaskets).
• 📸 Smartphone (to fix the location of parts before disassembly).

⚠️ Attention: If the refrigerator is connected to the network, unplug it from the outlet for 10–15 minutes before work starts. This is necessary not only for safety, but also to avoid accidentally turning on the fan (in No Frost models) during disassembly. Also prepare the place: spread a towel or cardboard so as not to scratch the floor and not lose parts.

In models Samsung with a system No Frost (for example, RB37J5000 or RS62R5001) the boxes are often mounted on plastic guides with latches, and in drip refrigerators (for example RT28M3000) can be used metal slides. Check the type of fastening before starting work - this will save time.

2. Removing the drawer: a universal method for most models

The algorithm for removing the drawer is the same for 80% of refrigerators Samsung, but there are exceptions (about them in the next section). Follow these instructions:

1. Pull out the drawer all the way. If it does not come out completely, then there is a stopper (see point 3).
2. Lift the front part of the drawer 1-2 cm and pull it towards you. In most models, the fastening consists of L-shaped grooves, which are fixed when pressed.
3. If the drawer does not budge, inspect it from below: there may be hidden latches (often found in series RF i RS). Press them with a screwdriver.

🔹 Visual hint: On the guides of many models Samsung there are arrows or inscriptions PUSH/PULL. They indicate which way to press to remove.

⚠️ Attention: In refrigerators Samsung with the function "CoolSelect Zone" (for example, RF23HCEDBSR) drawers may have electronic sensors. When disassembling, do not pull the wires - disconnect the connectors carefully, having previously photographed their location.

3. Disassembling the box: step by step with photo

After removing the box from the guides, it needs to be disassembled for cleaning or repair. The design of a typical box Samsung includes:

• 📦 Case (plastic or glass).
• 🔄 Guide rollers (bottom).
• 🧊 Drainage holes (if the vegetable drawer).
• 🔩 Fixing screws (in models with Fresh Zone).

Disassembly instructions:

1. Turn over the drawer and check the bottom. In most cases, there are 4-6 latches (round or rectangular).
2. Pry up the latches with a flat screwdriver, starting from the corners. Do this carefully - the plastic may crack.
3. Remove the bottom of the box. Under it you will see rollers and, possibly, drainage tubes.
4. For complete disassembly (for example, to change the rollers) unscrew the screws securing the side walls.

Example of location latches in the model RB30J3000. In other series there may be more or less of them.

What to do if the latch is broken?

If the plastic latch is cracked when removed, it can be temporarily replaced with a metal bracket (for example, from a stationery folder) or fixed with superglue. However, for a long-term solution, it is better to order an original part from the manufacturer (the article number is usually indicated on the latch itself).

🔹 Cleaning tip: If you are disassembling the box to remove mold, after washing it, treat it vinegar solution (1:1 with water) or with a specialized antibacterial spray. Do not use abrasive detergents - they scratch the plastic.

4. Features of disassembly in No Frost vs drip models

The defrosting system directly affects the design of the boxes. Here are the key differences:

🔹 No Frost refrigerators (series RB, RS, RF)

• 🌀 Ventilation holes in the back wall of the drawer - do not overlap them during assembly.
• 🔄 Guides often plastic, with a smooth movement. When disassembling, check them for presence of play.
• ❄️ Drainage system can be integrated into the drawer (especially in Fresh Zone areas).

🔹 Drip refrigerators (series RT, RL)

• 💧 The drainage hole located in the back of the drawer - it needs to be cleaned regularly.
• 🔩 Metal slide is secured with screws (a Phillips screwdriver may be required).
• 🧊 Ice on the bottom of the drawer is a sign of clogged drainage. Disassemble the drawer and clean the tube with wire.

⚠️ Attention: In models Samsung with linear compressor (for example, RT28K3030) the drawers may have additional shock absorbers to reduce vibration When disassembling, do not lose the rubber gaskets - without them the box will be intact. rattle.

5. Typical box failures and how to fix them

Most often, users encounter with the following problems:

If the drawer is jammed:

1. Turn off the refrigerator and let the ice melt (if the problem is due to icing).
2. Check whether a foreign object has gotten into the guides (for example, a piece of food films).
3. Lubricate the slides food grade silicone (do not use WD-40 or machine oil!).

🔹 Important: In models with touch sensors (for example, Family Hub) after disassembly you may need resetting the settings. To do this, hold down the Power Cool and Fridge button at the same time for 5 seconds.

6. Assembling the box: how to avoid mistakes

Assembling the box back is often more difficult than disassembling it:

• 📋 Check the location of all parts Based on a photo taken before disassembly.
• 🔧 Tighten the screws crosswiseto avoid distortion.
• 🧴 Lubricate the guides before installing the box.
• 🔄 Check the movement of the drawer until the products are fully loaded.

⚠️ Attention: If after assembly the drawer does not lock in the closed positioncheck:

• Are the metal slides bent? metal skids (in drop models). drawer.
• Are they broken? plastic stoppers on the front of the drawer.
• Is it in the way sealing rubber on the door.

The box should fit into the grooves at an angle of 10–15° and be fixed with with a light click.

7. Where to buy spare parts for the Samsung drawer

If during disassembly you find broken parts, you can replace them. Here is where to look for original and compatible spare parts:

• 🛒 Official service Samsung - warranty on parts, but high price.
• 🔧 Spare parts stores (for example, "Spare parts for household appliances", "220" Volt").
• 🌍 AliExpress/Ebay -cheaper, but long wait and risk of low-quality copies.
• 🔄 Used markets (Avito, Yula) - suitable if you need a temporary replacement.

🔹 How to select a spare part:

1. Find refrigerator model (on the sticker inside or on the back wall).
2. Specify part number (usually indicated on the part itself or in instructions).
3. Check compatibility by serial number (for example, for boxes of series RB and RT they can differ).

⚠️ Attention: When buying rollers or guides, take set even if one part breaks, the second may wear out in the near future.

Average prices for spare parts (2026):

Part	Original (rub.)	Analogue (rub.)
Guide (plastic)	800–1 200	300–500
Roller for drawer	400–700	150–300
Bottom of the box (plastic)	1 500–2 500	800–1 200
Latch latch	200–400	50–150

FAQ: Frequently asked questions about disassembling boxes Samsung

Is it possible to disassemble the drawer without removing it from the guides?

Theoretically, yes, but this is inconvenient and fraught with damage. For example, in models with Fresh Zone the bottom of the drawer is often secured with screws that cannot be unscrewed without complete removal: in In this case, you can wash the box directly on the guides, having previously secured them with masking tape.

What to do if, after disassembling, the box begins to jam?

The reasons may be the following:

• 🔧 Warped guides -check their horizontal level.
• 🧴 Not enough grease —use silicone spray.
• 🧊 Icing (in No Frost)—defrost the refrigerator for 12 hours.
• 🔩 The screws are loose —tighten fastenings.

How to remove the glass drawer in Samsung Premium models (for example, RS68A8840)?

Glass drawers are removed similarly to plastic ones, but with care:

1. Pull out the drawer until stop.
2. Lift the front part by 2-3 cm and pull it towards you. Models RS often have hidden latches on the sides - press them with a screwdriver.
3. Glass is heavier than plastic, so remove the box with an assistant.

⚠️ Do not place a glass box on a hard surface without a gasket - it may crack.

Do I need to disassemble the box to replace the seal?

No, the sealing rubber is attached to the refrigerator body, and not to the drawer. However, if the seal is on drawer door (in models with a Fresh Zone), then disassembly will be required to replace:

1. Remove the drawer from the guides.
2. Pry out the old seal with a flat-head screwdriver (it is attached to the groove).
3. Insert the new seal, starting from the corners.

Can the box be washed in the dishwasher?

Depends on the material:

• ✅ Plastic boxes — it is possible, but at a temperature not exceeding 50°C and without aggressive detergents.
• ❌ Glass boxes — only hand washing, as they can crack due to temperature changes.
• ⚠️ Boxes with electronic sensors - absolutely not!