Refrigerators Stinol are one of the most popular on the Russian market due to the combination of reliability, functionality and affordable price. When buying, moving or renovating, the question often arises: how much does a Stinol refrigerator weigh? This characteristic is critical for planning transportation, choosing an installation location, and even checking the strength of the floor in the apartment. The weight depends on the model, the volume of the chambers, the type of compressor and the materials of the housing - the spread can be from 40 to 120 kg.
In this article you will find accurate data on the weight of popular Stinol models (including rare modifications), learn how to independently determine the weight by the serial number, and also get practical advice on moving and installing heavy units. We will also look at why the weight of the refrigerator may differ from that declared by the manufacturer and what this affects during operation.
Why it is important to know the weight of the Stinol refrigerator
The weight of the refrigerator is not just a technical characteristic. It directly affects:
- 🚛 Logistics: delivery cost, choice of transport (car or truck with an elevator), number of loaders.
- 🏠 Installation: floor strength (especially important for old houses with wooden floors), the ability to climb stairs without damage.
- 🔧 Repair and maintenance: some work (for example, replacing a compressor) is more convenient to carry out in a horizontal position, which requires taking into account the weight.
- 📦 Disposal: in some regions, tariffs for the removal of bulky waste depend on the weight of the equipment.
For example, a refrigerator Stinol STS 167 weighs about 70 kg - it can be carried manually by two people, while a model Stinol RF 340 (110 kg) will require the use of a trolley or professional loaders. Incorrect weight assessment can lead to injury or damage to equipment.
⚠️ Attention: If you plan to install the refrigerator on a balcony or loggia, check the maximum load on the stove according to the house design. Exceeding the norm is fraught with collapse!
Weight of popular Stinol models: table with exact data
Below are the current data on the weight of refrigerators Stinol different series. Please note that weight may vary slightly (±2-3 kg) depending on the year of manufacture and equipment (for example, the presence of an ice maker or water dispenser).
| Model | Type | Total volume (l) | Weight (kg) | Features |
|---|---|---|---|---|
| Stinol STS 100 | Single-chamber | 100 | 38–42 | Compact, suitable for a summer residence |
| Stinol STS 167 | Double-chamber | 260 | 68–72 | Classic model with mechanical control |
| Stinol RF 340 | Side-by-Side | 340 | 105–110 | Premium series with No Frost and dispenser |
| Stinol K 56 | Single-chamber | 56 | 28–30 | Mini-fridge for office |
| Stinol STS 200 | Double-chamber | 300 | 80–85 | Popular model with bottom freezer |
To clarify the weight of a specific modification, check the sticker on the back wall of the refrigerator (usually the model and weight are indicated there) or use instructions for decoding the serial number.
What determines the weight of a refrigerator Stinol
The mass of equipment is formed from several components. Let's consider the key factors:
- Compressor type:
- 🔄 Linear compressors (outdated models) are 5-10 kg heavier.
- ⚡ Inverter compressors (modern) lighter and more compact.
- Casing material:
- 🛡️ Steel walls (0.6–0.8 mm thick) add 15–20 kg.
- 📦 Plastic panels (in budget models) reduce weight by 10–15 kg.
- Cooling system:
- ❄️ No Frost requires additional fans and evaporators (+8–12 kg).
- 💧 The drip system is lighter, but less efficient.
- 🍹 Ice maker: +3–5 kg.
- 💧 Water dispenser: +4–7 kg.
- 🔊 Electronic control unit: +1–2 kg.
- Find the sticker on the back wall or inside the refrigerator compartment (example:
STS167-001-00012345). - The first 3-4 characters after the letters (
STS167) are the model. Check it with table above. - The numbers after the hyphen (
001) indicate the modification:001–003: basic configuration (weight closer to the lower limit of the range).004–006: extended configuration (weight closer to the upper limit).
For example, Stinol STS 101 (drip system, mechanical control) weighs 40 kg, while Stinol RF 360 (No Frost, electronic control, dispenser) - 115 kg. The difference is 2.5 times!
How to find out the weight of a Stinol refrigerator by serial number
The serial number (usually starts with ST or RF) contains encoded information about the model, including the approximate weight. You can decipher it as follows:
Example: serial number RF340-005-... corresponds to a model Stinol RF 340 with a weight of 108–110 kg (since the modification 005 belongs to the upper range).
⚠️ Attention: On some models (manufactured before 2010 year) the serial number may not contain information about the modification. In this case, rely only on the model name.
Where else can you find information about weight?
If the sticker has worn off, check:
1. model and weight are indicated).
2. The box from the refrigerator (technical data is duplicated on it).
3. Electronic documentation on the Stinol website (enter the model in the search).
How to properly transport a heavy Stinol refrigerator
Moving a refrigerator with weight 80+ kg requires preparation. Here are step-by-step instructions:
Unplug the refrigerator 12 hours before transport|Remove all food and removable parts|Secure doors with tape or straps|Prepare a cart or stretcher for models heavier than 60 kg|Check the route for narrow openings-->
For models weighing more than 100 kg (for example, Stinol RF 360) necessarily:
- 🚪 Use special straps for carrying (cost ~500 rub.).
- 🛠️ Remove the doors if the refrigerator does not fit through the opening (door weight is 10–15 kg).
- 🚗 For transportation, rent Gazelle with a tail lift (cost ~1500 rub./hour).
When climbing stairs, hold the refrigerator at an angle of 45° - this distributes the load evenly. Avoid tilting more than 60°: this can damage the compressor!
Frequent errors in assessing weight and their consequences
Many users encounter problems due to incorrect assessment of the weight of the refrigerator. Let's consider typical situations:
| Error | Consequences | How to avoid |
|---|---|---|
| Trusted "by eye" | Broken steps, back injuries | Always check the weight using documents |
| Ignored the weight when choosing places | Deflection of the floor, cracks in the tiles | Check the load-bearing capacity of the floors |
| Did not take into account the weight of the packaging | Exceeding the lifting capacity of the elevator | To weight refrigerator, add 10–15 kg (box, polystyrene foam) |
It is especially dangerous to underestimate the weight when installing a refrigerator on the second floor of a country house. Wooden floors are often designed for a load of 150–200 kg/m² - a heavy model Stinol + shelves filled with products can exceed this limit.
FAQ: Answers to frequently asked questions about the weight of refrigerators Stinol
Can the weight of a refrigerator be determined by its volume?
Approximately - yes. Formula: volume (l) × 0.3 + 10 kg. For example, for a 260 l model: 260 × 0.3 + 10 = 88 kg (actual weight Stinol STS 167 - 70 kg, error ~20%). For more details, see the technical data sheet.
Why does the new Stinol refrigerator weigh more than indicated in the specifications?
The manufacturer indicates the “net” weight without packaging and removable elements. Actual delivery weight includes:
- Box and foam (+8–12 kg),
- Transport bolts (+1–2 kg),
- Documentation and accessories (+0.5 kg).
The difference can reach 15 kg.
Which Stinol refrigerator is the lightest?
Mini model Stinol K 56 weighs only 28 kg. Of the full-size ones - Stinol STS 100 (40 kg). These refrigerators can be moved without the help of loaders.
Does weight affect energy consumption?
Indirectly - yes. Heavy models are usually equipped with more powerful compressors (for example, consumes 400 kW/year, and light ones consume 220 kW/year). However, the key factor is Stinol RF 340 consumes 400 kW/year, and the light STS 100 - 220 kW/year). However, the key factor is energy efficiency classand not weight.
Is it possible to reduce the weight of the refrigerator for transportation?
Yes, but partially:
- Remove shelves and drawers (saving 3–5 kg),
- Remove the door balconies (another 2–3 kg),
- Disconnect the legs (0.5–1 kg).
The compressor and housing cannot be removed - this will break the tightness of the system.