The situation when after purchase or rearranging the furniture, it turns out that the door of the refrigeration unit opens in the wrong direction, familiar to many owners of household appliances. This creates inconvenience during operation, especially in compact kitchens where every centimeter of free space is important. Fortunately, most modern models of the brand Beko are designed with this possibility in mind and allow you to change the opening direction without much difficulty.
The rehanging process does not require deep engineering knowledge or specialized expensive equipment. It is enough to have a basic set of household tools and strictly follow the algorithm of actions described in the technical data sheet or this article. The main thing is to be careful not to damage the enamel coating or plastic fittings.
In this guide we will look in detail at how to rehang the Veko refrigerator door, what to pay special attention to when dismantling the hinges and how to properly adjust the tightness. You will also find answers to frequently asked questions and useful tips that will simplify the task even for a beginner.
Necessary tools and workplace preparation
Before starting any manipulations with the structure of the refrigeration cabinet, it is necessary to prepare the workplace. You will need a free area next to the unit where you can temporarily place the removed doors. It is better to cover the floor with a soft material, such as a blanket or cardboard, to avoid scratches on the glossy surface.
As for tools, the standard set usually includes a Phillips and flathead screwdriver, as well as a wrench, the size of which depends on the model (most often 8 mm or 10 mm). In some cases, you may need a hex wrench, which often comes with new equipment.
- 🔧 Phillips screwdriver for removing decorative plugs and screws.
- 🔩 Wrench or socket with a wrench for the main hinge bolts.
- 📏 Level for checking horizontalness installation after completion of work.
- 🧤 Work gloves to protect hands from sharp metal edges.
⚠️ Attention: Before starting work, be sure to disconnect the refrigerator from the power supply! This is a safety measure that will prevent electric shock and allow you to safely work with internal elements if you need access to the sensor wiring.
Do not forget to clear the shelves inside the door and the refrigerator itself from food. The empty structure is significantly lighter, reducing the risk of dropping a heavy part and damaging the floor or feet. It is also recommended to enlist the help of a second person, since the doors of modern models can be quite massive.
Dismantling the upper part and removing the door
The process begins with the top hinge, since it is this that holds the bulk of the door leaf. First you need to remove the decorative plug that hides the fasteners. It can be made in the form of a plastic cover or sticker, which should be carefully pryed off with a flat screwdriver.
After gaining access to the bolts, do not rush to unscrew them completely right away. Loosen the top hinge fasteners, but leave them slightly tight to prevent the door from falling prematurely. If your model Beko has a door sensor or wiring going through the top hinge, proceed with extreme caution.
Now you can completely unscrew the bolts and remove the top hinge. Hold the door with your other hand (or have an assistant) and gently lift it off the bottom support pin. The door should be immediately put aside in a safe place, having first removed all removable shelves and containers from it.
The top hinge on the other side is installed in the free space. To do this, technological holes must already be provided in the top panel of the case, closed with plastic plugs. Remove the plugs from the right side and move them to the left to hide the resulting voids.
Rearranging the lower support and handle
The next stage involves working with the lower part of the structure. The support sleeve and the lower hinge are located here. Similar to the upper fastener, it is necessary to dismantle the lower element on one side and move it to the opposite. Often the lower pin is simply inserted into the hole and secured with a thread.
The handle requires special attention. On many refrigerator models Beko the handles are asymmetrical or have hidden fastenings. If the handle is solid and covers the end of the door, as a rule, there is no need to move it - it will simply end up on the other side after turning the door 180 degrees. However, if the handle consists of two parts or is attached with screws from the bottom/top, it must be rearranged.
To dismantle the handle, it is often necessary to remove decorative trims or gain access to the screws through the inside of the door. In some cases, you have to carefully bend the seal or remove the plastic panel. Operate without excessive force so as not to break the plastic latches.