Refrigerators Hotpoint-Ariston are known for their reliability and intuitive controls, but even experienced users sometimes Questions arise about setting temperature conditions. Incorrectly set parameters can lead to overfreezing of food, increased energy consumption, or, conversely, insufficient cooling. In this article, we will look at how to correctly set the temperature in the refrigerator and freezer compartments, which modes are optimal for different operating conditions, and what to do if the settings go wrong.
A feature of the equipment Hotpoint-Ariston is the presence of both mechanical and electronic controls, depending on the model. For example, in series HBNF or HBM touch panels with digital display are used, while in budget lines (HTS, HT) classic rotary controls are often found. We will consider both options, and also give recommendations on the choice of temperature depending on the workload of the chambers and external factors (for example, heat in the kitchen).
It is important to consider that the manufacturer recommends maintaining a temperature in the refrigerator compartment from +2°C to +6°C, and in the freezer - from −18°C to −24°C. However, these values can be adjusted depending on the type of food being stored, how often the door is opened, and even the location of the refrigerator in the room. Below you will find step-by-step instructions, tables of optimal modes and answers to frequently asked questions.
Types of temperature control in Hotpoint-Ariston refrigerators
Before you start setting up, determine which control system is used in your model. This can be done by the appearance of the panel or according to the instructions for the device. There are three main types:
- 🔄 Mechanical control —rotary regulator (more often found in models before 2018, for example, Hotpoint-Ariston HTS 1611). The temperature is changed by smooth rotation of the knob, the divisions on the scale are usually numbered from 1 to 5 or 7.
- 📱 Electronic control with buttons —a panel with a display and touch/mechanical buttons (series HBNF, HBM). The temperature is set by pressing “+”/“−” or selecting from the menu.
- 🤖 Smart control —models with Wi-Fi support and a mobile application (Hotpoint-Ariston Active Smart). Setting is possible remotely via a smartphone.
If you are not sure about the type of control, pay attention to the front panel of the refrigerator:
- 🔍 Availability digital display with temperature display is a sign of electronic control.
- 🎛️ Rotary knob inside the camera or on the top panel - a mechanical regulator.
- 📶 Icon Wi-Fi or inscription Smart —model with remote control control.
For models with smart control pre-configuration of the application will be required Hotpoint-Ariston Connect (available for iOS and Android). In this case, the temperature can be changed both directly on the refrigerator and via the phone, which is convenient for remote control.
Optimal temperature conditions for different cameras
Manufacturer Hotpoint-Ariston recommends adhere to standard values, but they may vary depending on operating conditions. Below is a table of optimal modes for the refrigerator and freezer compartments:
| Chamber type | Recommended temperature | For which products | Features |
|---|---|---|---|
| Refrigeration chamber | +2°C…+4°C | Meat, fish, dairy products, ready meals | Ideal for short-term storage (up to 5 days) |
| Refrigerator compartment | +4°C…+6°C | Vegetables, fruits, drinks, sauces | Suitable for long-term storage (up to 2 weeks) |
| Freezer compartment | −18°C | Frozen food, long-term storage (up to 6 months) | Standard mode for most models |
| Freezer compartment | −20°C…−24°C | Fast freezing, storage for more than 6 months | Increases energy consumption, used when fully loaded |
For models with the function Super Cool (fast cooling) or Super Freeze (fast freezing), lower temperatures are temporarily set (for example, −30°C in freezer for 24 hours). This is useful when loading a large amount of warm food, but is not recommended for constant use due to increased energy consumption.
If your refrigerator has freshness zone (indicated as Fresh Box or 0°C Zone), its optimal temperature is 0°C…+1°C. This zone is designed for storing fish, meat and herbs without freezing, preserving their texture and taste for up to 7 days.
How to set the temperature in refrigerators with mechanical control
Mechanical regulators are found in models Hotpoint-Ariston budget and mid-range segments, such as HTS 1611, HT 1811 or HB 1801. The temperature in them is adjusted by turning the knob located inside the refrigerator compartment or on the top panel (depending on the model).
Algorithm of actions:
- Find the regulator - usually it is labeled
Thermostator has a scale with numbers from 1 to 5 (less often up to 7). - Turn the knob clockwise to lower temperature (increase cooling), counterclockwise to increase.
- Focus on the middle position (usually 3–4 on a scale of up to 5). This corresponds to +4°C in the refrigerator compartment.
- For the freezer compartment (if the regulator is common), use a separate switch or set the knob to position 4–5.
Important: in mechanical models there is no precise linking of the numbers on the scale to degrees. For example, position “3” in one model may correspond to +4°C, and in another – +5°C. For precise adjustment, use thermometer for the refrigerator (place it in the center of the chamber for 12 o'clock).
☑️ Checking the temperature in a mechanical refrigerator
⚠️ Attention: In models with one regulator for both chambers (for example Hotpoint-Ariston HTS 1201), changing the temperature of the refrigerator compartment automatically affects the freezer. If you need more precise control, consider purchasing a model with separate settings.
Temperature settings in electronically controlled refrigerators
Electronic control panels are found in most modern models Hotpoint-Aristonsuch as HBNF 5202, HBM 1801 or HFP 1801. They allow you to set the temperature with an accuracy of 1°C and are often equipped with a display showing the current values.
Step-by-step instructions:
- Find the control panel - it is located on the top of the door or inside the chamber.
- Press the button
Temp(orFridgefor the refrigerator compartment,Freezerfor the freezer). - Use the “+” and “−” buttons to set the desired value. The display will show the current and target temperature.
- Confirm the selection (in some models, the setting is saved automatically after 5 seconds of inactivity).
In models with two-zone control (for example, Hotpoint-Ariston HFP 1801), you can independently adjust the temperature in the refrigerator and freezer cameras. To do this:
- 🔹 Press
Fridgeand set the value for the refrigerator compartment. - 🔹 Press
Freezerand set the value for the freezer camera. - 🔹 Some models have a button
Superto activate fast cooling/freezing modes.
If the display shows an error (for example, E1 or H), this may indicate a malfunction of the temperature sensor. In this case, diagnostics are required - contact the service center Hotpoint-Ariston.
What to do if the display does not respond to pressing?
If the control panel does not respond, try unplugging the refrigerator for 1-2 minutes, then turn it on again. If the problem persists, there may be a firmware failure or a faulty control board. In this case, professional repair is required.
Super Cool and Super Freeze modes: when and how to use
Functions Super Cool (super cooling) and Super Freeze (super freezing) are designed to quickly lower the temperature when loading a large number of products. They automatically turn off after 6-24 hours (depending on the model), but you can turn them off manually.
How to activate:
- 🧊 For Super Cool (refrigerator compartment): press the button
Super Coolon the panel. The temperature will temporarily drop to +2°C. - ❄️ For Super Freeze (freezer): press
Super Freeze. The temperature will drop to −24°C…−30°C.
When to use:
- 🛒 After large purchases (for example, loading 5+ kg of meat or fish).
- 🍲 In preparation for the holidays (freezing semi-finished products).
- ☀️ In hot weather, if the refrigerator is often opened.
⚠️ Attention: Modes Super Cool/Freeze increase energy consumption by 15–20%. Do not use them constantly - only when you need quick cooling. After the process is completed, the function turns off automatically, but in some models (for example, HBM 1801) it must be turned off manually.
In refrigerators with inverter compressor (series Inverter), these modes work more efficiently and less noisily, since the compressor smoothly regulates power without sudden jumps.
Frequent errors when setting the temperature and their consequences
Incorrect temperature setting can lead not only to food spoilage, but also to increased wear and tear of equipment. Let's look at typical errors and their consequences:
| Error | Consequences | How to fix |
|---|---|---|
| The temperature in the refrigerator compartment is too low (<+2°C) | Frozen food, icing of the rear wall, increased energy consumption | Increase the value by 1–2°C, defrost the chamber when ice forms |
| Temperature too high (>+6°C) | Rapid spoilage of perishable foods (meat, fish, milk) | Reduce the value by 1–2°C, check the door seals |
| Continuous use of Super Freeze | Increased energy consumption, compressor wear | Disable the mode after freezing food (after 6–12 hours) |
| Ignoring external temperature (hot room) | Insufficient cooling, frequent compressor starts | Increase cooling by 1-2°C in summer |
If you notice that the refrigerator Hotpoint-Ariston does not maintain the set temperature (for example, in the freezer -15°C instead of -18°C), the reasons may be the following:
- 🚪 Wear of the door seal - check the tightness of the rubber.
- 🧊 Fan freezing (in models with No Frost) - defrosting is required.
- ⚡ Temperature sensor malfunction - need replacement.
- 🔋 Weak mains voltage - use a stabilizer.
In Hotpoint-Ariston refrigerators with a No Frost system (for example, HBNF series), the temperature in the freezer may temporarily rise to −15°C during automatic defrosting. This is normal and does not require intervention - after 1-2 hours the value will be restored.
Tips for saving energy without losing cooling quality
The refrigerator Hotpoint-Ariston is one of the most energy-intensive appliances in the house, but its consumption can be optimized without compromising food storage. Here are some proven methods:
- 🌡️ Set the temperature in the refrigerator to +5°C (instead of +4°C). A difference of 1°C reduces power consumption by 5-7%.
- 🍎 Do not load the camera more than 70%. Air circulation deteriorates when overfilled, and the compressor runs longer.
- 🔌 Place the refrigerator away from the stove, radiator or direct sunlight. The optimal distance to heat sources is 50 cm.
- 🧊 Defrost the freezer regularly (if the model is not No Frost). Ice 5 mm thick increases energy consumption by 20%.
- 🚪 Open the door as little as possible. Each opening for 10 seconds requires 5-10 minutes of compressor operation to restore the temperature.
In models with inverter compressor (for example, Hotpoint-Ariston HFP 1801 Inverter) energy consumption is 30-40% lower compared to conventional motors. If you are planning to buy a new refrigerator, pay attention to this option.
Another way to save is to use Vacation mode (if your model has it). When this function is activated, the refrigerator compartment maintains a temperature of about +12°C, and the freezer operates as usual. This is useful if you leave for 1-2 weeks and leave the chamber almost empty.
FAQ: Frequently asked questions about setting the temperature
How to reset the temperature settings to factory settings?
In most models Hotpoint-Ariston with electronic control, a reset is performed by holding the button Temp (or Reset) for 5–10 seconds. On mechanical models, return the control to the middle position (usually “3”). After the reset, the temperature of the refrigerator compartment will be set to +4°C, the freezer compartment to −18°C.
Why does not the Hotpoint-Ariston refrigerator cool to the set temperature?
There may be several reasons:
- 🔌 Insufficient voltage in the network (there should be 220–240 V).
- 🧊 Evaporator freezing (defrost required).
- 🚪 Door seal damaged (check the cracks with a piece of paper).
- ⚙️ Thermostat or sensor malfunction (diagnostics is needed).
If the problem persists, contact the service center.
Is it possible to turn off the freezer if it is not needed?
In most models Hotpoint-Ariston the freezer cannot be turned off, but you can set it to minimum cooling (for example, −12°C instead of −18°C). Some two-compressor models (for example HBM 1801) have the option to completely turn off one of the chambers - see the instructions for your model.
How to check the real temperature in the chamber?
Use a specialized one refrigerator thermometer (costs about 200–300 rubles). Place it in the center of the camera for 12 o'clock. For accurate measurements:
- 📦 Do not place the thermometer near walls or food.
- 🕒 Check the temperature in the morning when the door has not been opened for a long time.
- 🔄 Repeat the measurement 2-3 times to average the result.
What to do if an error flashes on the display E1 or H?
Error E1 usually indicates a problem with the refrigerator compartment temperature sensor, and H to compressor overheating. Try:
- Disconnect the refrigerator from the mains for 10 minutes, then turn it on again.
- Check if anything is blocking the ventilation holes.
- If the error repeats, call a technician - the sensor may need to be replaced.