The issue of recycling old household appliances faces every resident of Omsk when equipment breaks down or requires replacement. It is impossible to simply throw a bulky unit into a trash container, not only because of its size, but also for environmental reasons, since the cooling system contains freons. Fortunately, the city has a developed network of collection points for non-ferrous and ferrous metals, where refrigerator they will accept it for very real money.
The cost of delivery depends on the current rate for scrap, the weight of the device and its technical condition. Many Omsk residents do not know that even idle equipment has value as a source of copper, aluminum and steel. In this article we will analyze in detail which organizations offer the best conditions, how to properly prepare the unit for transportation and what amount you can expect.
There are two main ways to get rid of old equipment: hand it over yourself to a metal collection point or call a specialist to removal home. The first option is more profitable financially, since you do not pay for the services of movers and transport, but requires a personal car or ordering a separate car. The second option is more convenient if you live in an apartment building without a freight elevator.
Main points for receiving refrigerators in Omsk
There are several large chains and private companies specializing in procurement in Omsk. non-ferrous scrap. It is the presence of copper in the heat exchangers and compressor that makes the old refrigerator a valuable raw material. Large market players usually offer fixed tariffs and have their own weighing sites.
One of the most famous companies is Vtorchermet, which has many branches throughout the city. They accept disassembled and unassembled household appliances, but the price for an unassembled unit will be lower due to the cost of dismantling it. It is also worth paying attention to specialized points, such as “Metal-Omsk” or “Eko-Lom”, which often offer more flexible conditions for individuals.
⚠️ Attention: Before your trip, be sure to check the operating hours of the reception point. Some sites work only with legal entities or accept scrap at certain hours, and may be closed on weekends.
Small private collection centers located in residential areas may offer a higher price in order to compete with chain operators. However, when delivering to such places, it is important to visually control the weighing process. Overall weight The refrigerator often causes controversy, and the honesty of the receiver plays a key role here.
Pricing: what the cost of delivery depends on
The price you get for an old refrigerator is formed from several components. The main part of the cost is ferrous metalfrom which the device body is made. However, the value is hidden inside - these are non-ferrous metals, in particular copper and aluminum.
If you hand over the refrigerator disassembled, separating the copper tubes, aluminum radiators and steel body, the total amount can increase 2-3 times. Reception points pay the same tariff for copper, so independent disassembly often pays for the time and effort spent. A standard two-chamber refrigerator contains from 1 to 2 kg of copper and a significant amount of aluminum.
The cost is also affected by the presence of a compressor. The engine contains a lot of copper in the windings, but it is difficult to remove it without special equipment. Therefore, some locations accept compressors separately or at a higher rate than regular scrap. The table below shows approximate prices for different types of scrap from the refrigerator:
| Type of scrap | Condition | Approximate price (rub/kg) |
|---|---|---|
| Copper (mix) | Pure, without insulation | 600 - 650 |
| Aluminum | Radiators, profiles | 90 - 110 |
| Stainless steel | Food grade, magnetic | 40 - 50 |
| Scrap ferrous metals | Case (size) | 12 - 16 |
It is worth noting that prices for scrap metal are volatile and change depending on stock exchange quotes. What was relevant a month ago may cost less today. Therefore, before handing over, it makes sense to call 2-3 nearest points and find out the current price.
Do-it-yourself disassembly to increase profits
If you decide to maximize profits, you will have to dismantle the refrigerator. This process is not complicated, but requires a minimum set of tools: a grinder, a hacksaw, pliers and screwdrivers. The main safety rule is to unplug the unit and let it stand for several hours. disconnect unplug the unit and let it stand for several hours.
First of all, you need to remove the doors to provide access to the internal components. Then the compressor is carefully removed, which is attached to the rear wall with four bolts. This is where the bulk of copper is located. The heat exchanger (condenser), located at the back, also contains non-ferrous metal, but often it is made of steel with a thin coating, which must be taken into account.
- 🔧 Tools: grinder, hacksaw, pliers, screwdrivers.
- 🧤 Protection: gloves and glasses are required when working with metal.
- 🔋 Caution: in old models there may be oil that needs to be drained into a separate container.
When cutting the body with a grinder, be careful: inside the panels there may be polyurethane foamwhich When heated, it emits acrid smoke. It is best to work outdoors or in a well-ventilated area. The separated metal fractions are sold separately, which gives the final financial gain.
⚠️ Attention: In old Soviet refrigerators, ammonia could be used as a refrigerant. Although the likelihood of it being preserved in a discarded unit is small, when opening the tubes, avoid inhaling vapors and contact with liquid.
What to do with plastic parts?
Plastic shelves, handles and internal lining are not valuable for metal collection points. They must be disposed of separately as household waste or, if the plastic is clean, taken to plastic collection points, if there are such in your area.
Removal and recycling services in Omsk
Not everyone has the opportunity and desire to independently disassemble the equipment and transport it to the collection point. For such cases, services for old refrigeration equipment operate in Omsk. Often such services are offered by the same companies that buy scrap, as well as private advertisements on specialized websites. removal old refrigeration equipment. Often such services are offered by the same companies that buy scrap, as well as private advertisements on specialized websites.
The removal service can be paid or free. Free removal is usually offered if the refrigerator is in relatively intact condition and can be sold as scrap in its entirety. If the unit requires a difficult descent from the floor or is in disrepair, you will have to pay extra for the services of loaders and transport. The average cost of removal from a floor without an elevator ranges from 300 to 500 rubles per floor.
There are also services for trade-in in large household appliance stores. When you buy a new refrigerator, you can trade in your old one and get a discount. However, the discount amount rarely exceeds 1000-2000 rubles, which is often lower than the market value of the metal. This option should be considered only if you are simultaneously updating your equipment.
When ordering removal, it is important to agree on the arrival time in advance. Loaders may be late or arrive at an inconvenient time. Check whether the price includes getting down from the floor and removing it from the apartment, or whether you will need to deliver the unit to the entrance yourself.
☑️ Check before handing over the refrigerator
Environmental aspects and proper disposal
Proper disposal of refrigerators is not only a matter of making money, but also an environmental responsibility. The refrigerants contained in the cooling system, when released into the atmosphere, destroy the ozone layer. In addition, the thermal insulation may contain freonwhich is a greenhouse gas.
By handing over the refrigerator to official collection points, you guarantee that it will end up in a recycling plant, and not in a landfill, where it will rust for centuries. At specialized enterprises, freon is safely selected and the components are separated into fractions for reuse.
Some environmental organizations in Omsk hold campaigns to collect household appliances. During such periods, you can return your refrigerator for free, and sometimes even receive a small bonus or certificate. It is best to follow such events in local news pages or on the websites of city administrations.
Frequently asked questions (FAQ)
Do you need a passport to scrap a refrigerator?
Yes, according to the legislation of the Russian Federation on combating the theft of non-ferrous metals, collection points are required to register the data of the person giving it up. You will need to present a passport, the details of which will be entered in the reception log or database.
Will they accept a refrigerator with rust or dents?
Yes, the external condition of the case has virtually no effect on the price if you hand over the unit for scrap. Rusty and broken refrigerators are accepted in the same way as intact ones, since they will still be sent for melting down. The main thing is the presence of a metal case.
Is it possible to hand over a refrigerator if there is freon left in it?
Reception points accept refrigerators with freon, since processing plants have equipment for its safe pumping out. However, the price for such a unit will be lower than for an already produced (disassembled) one, due to the cost of its disposal.
Where can you find the current copper exchange rate in Omsk?
Current prices for copper and other non-ferrous metals can be found on the websites of large collection points (for example, "Vtorchermet", "Metal-Omsk") or by calling them directly. Exchange quotes are updated daily, but the retail price at the receiver may change less frequently.
How much does a regular refrigerator weigh?
The weight of a Soviet two-chamber refrigerator averages 60-70 kg. Modern models can weigh less - about 40-50 kg, depending on the volume of the chambers and the materials used. Weight affects the final amount when handing over the weight.