Inserting shelves into a refrigerator Atlant seems like a simple task - until you encounter a problem for the first time. Incorrect installation leads to distortions, squeaks or even broken fasteners. It is especially difficult to deal with models where the shelves are fixed on guides with grooves or latches. In this article - step-by-step instructions for all types of shelves (glass, plastic, metal), fastening diagrams for popular series Atlant and list of errors, which are accepted by 90% of users.
We took into account the nuances both for new refrigerators (for example, Atlant XM 6025-031 or MHM 1708-80), and for older models with metal grilles. We’ll separately look at how adjust the height of the shelves without tools and what to do if they don’t lock. All recommendations are based on the official plant manuals Atlant and the experience of service centers.
Types of shelves in Atlant refrigerators: how to determine yours
Before installation, you need to understand what type of shelves you are dealing with. The installation algorithm and the necessary tools (if they are needed at all) depend on this. In refrigerators Atlant there are 4 main types:
- 🔹 Glass shelves with metal edging —the most common in modern models (for example, Atlant XM 4426-000). They are mounted on plastic or metal guides with grooves.
- 🔹 Plastic shelves with a lattice structure — often installed in freezers or budget refrigerators (series MX). They are fixed with latches or hooks.
- 🔹 Metal grilles - typical for older models (before 2010). They are attached to hooks or bolts.
- 🔹 Drawers (containers) - usually in the freshness zone or lower compartments. They have roller guides. Drawers (containers) data-i="86">Grooves or slots
To accurately identify the type, inspect fasteners on the side walls of the refrigerator:
- 📌 Grooves or slots - for glass shelves.
- 📌 Hooks or loops —for plastic or metal grilles.
- 📌 Roller guides —for drawers.
In Atlant models after 2018, glass shelves are often equipped with a system EasyFix —they are fixed without additional fasteners, just insert them into the grooves until they click. If your refrigerator older, you may need plastic clamps (included).
Preparation for installation: what needs to be done before installation
Do not rush to immediately insert shelves. Incorrect preparation - the cause of 70% of problems with distortions and unstable positions. Follow this checklist:
Unplug the refrigerator (if it was turned on)
Remove all products and removable elements (drawers, trays)
Wash the shelves and guides with warm water with soap
Dry all parts (moisture can cause corrosion of metal fasteners)
Check the integrity of the seals on the door (they should not interfere with installation)-->
Pay special attention guides:
- 🧹 Make sure there are no crumbs or ice in the grooves (even small particles can block the fixation).
- 🔧 If the guides are plastic, check them for cracks. In models Atlant XM 6021-000 and similar ones, they often break during careless dismantling.
- 📏 Measure the distance between the grooves on opposite walls - it should coincide with the width of the shelf (permissible deviation: ±2 mm).
If you install shelves after defrosting or transportation, wait until the refrigerator reaches room temperature. Plastic parts become brittle at low temperatures and may crack during installation.
⚠️ Attention: In refrigerators Atlant with a system No Frost (for example, Atlant MY 3104-000) shelf guides are often integrated into the body. Do not try to remove them - this may damage the ventilation system.
Step-by-step instructions: how to insert a glass shelf
Glass shelves are the most capricious to install. Their main problem is uneven load distribution, due to which the shelf may crack. Follow the algorithm:
- Determine the correct position.
Most glass shelves Atlant have marking in the form of an arrow or logo - they should be directed towards the back wall of the refrigerator. If there is no marking, focus on metal edging —it should be in the front.
- Insert the front part of the shelf into grooves.
Carefully insert the edge of the shelf into the lower grooves on the side walls. The tilt angle is about 30°. Do not press hard: the glass may burst if it hits the back wall.
- Lower the back until it locks.
Slowly lower the shelf until it “sits” on the rear grooves. There should be a slight click. If it is not there, the shelf is not fixed.
- Check stability.
Press the shelf from above with a force of 3–5 kg. If it sag or wobbles, repeat installation. In models Atlant XM 4424-000 and similar ones, for reliability, use plastic clamps (included in the kit).
Video instructions (if visualization is needed):
On the official The YouTube channel Atlant has videos on installing shelves for popular series. Search by the model of your refrigerator + the phrase “installation of shelves».
| Refrigerator model | Type of shelves fastening | Installation features |
|---|---|---|
| Atlant XM 6025-031 | Grooves EasyFix |
The shelves are fixed without additional elements. When installing, you should hear a click. |
| Atlant MHM 1708-80 | Plastic guides with latches | You need to press the latch on the side to release the groove. The shelf is inserted at an angle of 45°. |
Atlant MY 3104-000 (No Frost) |
Integrated metal grooves | The shelves have rubber gaskets to dampen vibration. They cannot be removed! |
| Atlant MX 2822-66 (old series) | Metal hooks | The fastenings are adjustable in height manually (an allen key is required). |
⚠️ Attention: If the shelf “walks” in the grooves after installation, do not try to fix it with tape or glue! In models Atlant this may interfere with air circulation and cause uneven cooling. Contact the service center to replace the guides.
Installation of plastic and metal shelves: key differences
Plastic and metal shelves are easier to install than glass, but have their own nuances. The main rule: do not use excessive force - these materials are less durable than glass.
Plastic shelves (lattice)
Most often found in freezers or budget models (for example Atlant MX 2831-66). Installation algorithm:
- Find hooks or latches on the side walls of the refrigerator.
- Place the front part of the shelf by the hooks, then press on the back until it clicks.
- Check whether the shelf is in the way ventilation holes (relevant for
No Frost).
Metal grilles
In older models (Atlant before 2010), metal shelves are mounted on bolts or hooks. Here you will need the following tool:
- 🔧 To adjust the height, use a 5 mm hex key.
- 🔨 If the fasteners are rusty, treat them
WD-4010 minutes before dismantling. - ⚠️ Do not use pliers - they can damage the enamel refrigerator.
What to do if the metal shelf does not fit into place?
If the shelf rests against the back wall, check if the fastening hooks are bent in old refrigerators Atlant they often become deformed when moving, carefully straighten them with a flat screwdriver. wrapping the metal in fabric so as not to scratch the enamel.
Adjusting the height of the shelves: how to adjust to your needs
In most models Atlant the height of the shelves is adjustable without toolsException. - old refrigerators with metal bars. Here's how to do it:
Glass and plastic shelves
There are several pairs of grooves on the side walls of the refrigerator (usually 3–5). To change the height:
- Carefully lift the shelf up until it comes out of the grooves.
- Move it to the desired level (focus on the marks or numbering).
- Lower the shelf to fixation.
In models with the system EasyFix (for example, Atlant XM 6026-000) to change the height you need:
- Click on plastic latches on the side of the shelf.
- Lift the shelf and move it to other grooves.
Metal shelves
In old refrigerators, the height is adjustable manually:
- Loosen the fastening bolts using a hexagon.
- Move the hooks to the desired level (steps are usually 5 cm).
- Tighten the bolts, but do not overdo it - you can strip the threads.
Common mistakes and how to avoid them
Even experienced users make mistakes when installing shelves. Here TOP-5 problems and their solutions:
- 🚫 The shelf cracked during installation.
Cause: Incorrect insertion angle or excessive force. Solution: Buy an original shelf (the article number is listed in passport of the refrigerator) and insert it at an angle of 30°, without pressure on the back wall.
- 🚫 The shelf is loose or sagging.
Cause: Insufficient fixation in the grooves or worn guides. Solution: Check whether the plastic latches are broken. If so, replace them (the kit for Atlant costs ~300 rubles).
- 🚫 It is impossible to insert the shelf all the way.
Cause: Ice or debris has accumulated in the grooves. Solution: Clean the guides with a toothpick, then wipe with alcohol.
- 🚫 After installation, the refrigerator began to hum loudly.
Cause: The shelf touches the fan (relevant for
No Frost). Solution: Move the shelf to another level or adjust its position. - 🚫 Scratches remain on the glass shelf.
Cause: Metal objects (knives, forks) scratch the surface. Solution: Use silicone mats for dishes.
If the shelf does not hold even after correct installationcheck:
- 🔍 Does it match serial number with the original one (on some models Atlant the shelves differ in thickness).
- 🔍 Is there a deformation of the walls refrigerator (relevant after transportation).
⚠️ Attention: In refrigerators Atlant with linear compressor (for example, Atlant NM 4626-000), vibration during operation can move the shelves. If the problem persists, secure the shelf with additional silicone gaskets (sold in stores). hardware stores).
Operating tips: how to extend life shelves
Correct installation is only half the battle. To make the shelves last longer:
- 🧊 Do not place on glass shelves heavy pots (maximum load - 10 kg). Use the lower compartments to store bulky products.
- 🧴 Wash the guides regularly — accumulated dirt accelerates the wear of plastic parts.
- ❄️ When defrosting remove the shelves and dry them separately from the refrigerator (humidity contributes to the appearance of rust on metal elements).
- 🔄 Do not swap shelves —they are designed for specific compartments (for example, a shelf from the freezer is not suitable for the main compartment).
For models with No Frost:
- 🌬️ Make sure that the shelves do not overlap ventilation holes (usually located on the back wall).
- 🔊 If a whistleappears after installation, check whether the shelf is touching the air duct.
FAQ: answers to frequently asked questions
Is it possible to replace a glass shelf with a glass shelf? plastic?
No, this will disrupt the heat exchange in the refrigerator. Glass shelves conduct cold better and distribute temperature evenly. Plastic analogues (if they are not original) can lead to the formation of “warm zones”. The exception is if you find a plastic shelf with the same article numberas the original glass one.
Why does the new shelf not fit into the grooves?
Probable reasons:
- You are not buying a shelf from your model (even if it looks similar in appearance).
- Guides. deformed. This often happens during careless transportation. Try to carefully straighten them with a screwdriver.
- There is ice or debris left in the grooves. Clean them with a toothpick.
If the problem persists, contact the service center Atlant for diagnostics. data-i="310">Atlant
How to remove a shelf if it is jammed?
Do not pull it by force - you will break the fastenings. Try:
- Tilt the shelf forward at an angle of 45° and pull it towards you.
- If not helps, lubricate the guides with silicone grease (do not use oil!).
- For metal shelves in older models, you may need
WD-40(apply pointwise, then wipe dry).
Can the shelves be washed in the dishwasher?
Depends on the material:
- 🔹 Glass shelves - it is possible, but only at temperatures up to 50°C and without aggressive detergents.
- 🔹 Plastic shelves —hand wash only! They may become deformed in the dishwasher.
- 🔹 Metal grids —you can, but dry them immediately after washing to avoid rust.
Where to buy original shelves for "Atlant"?
Official spare parts are sold:
- In Atlant service centers (addresses on the manufacturer's website).
- In stores spare parts for household appliances (for example, "220 Volt", "M-Video")
- On marketplace (Wildberries, Ozon) - search by shelf article number (indicated in the refrigerator passport).
The cost of an original glass shelf is from 800 to 2500 rubles, a plastic one - from 500 rubles.